HCL 10.7.1

• Intel Core i3 540 @ 3.08 GHz
• GTS 450 works fully with GraphicsEnabler=yes
• 1x4GB 1333 MHz Ram
• Install Method: Retail USB Disk Image
• Audio - ACL892 Works!
• Ethernet - rtl8111e Works!
• USB - All Work
• SATA - All Work
• IDE - Untested
• E-SATA - Untested
• Shutdown/Reboot work 100% of the time.

• [MultiBeast 4.0.2: Lion Edition]
• (RTL8111E)
• Add the italics text below to your boot.plist .

<key>GraphicsEnabler</key>

<string>Yes</string>

• Intel Core2Duo @ 1.86 GHz
• Sapphire HD5670 works fully with GraphicsEnabler=yes
• 2x1GB 688MHz Ram
• Install Method: iATKOS L1 10.7.1
• Audio - VIA VT1708S Works!
• Ethernet - RTL8111DL Works!
• USB - All Work
• SATA - All Work after patch IOATAFamily for Lion[3]
• IDE - Work
• E-SATA - Untested
• Shutdown/Reboot work 100% of the time.

• iATKOS L1 10.7.1 distro with special options VoodooHDA 2.7.8 (highes) and RTL81XX
• P5B-DE does not support AHCI mode (only Enhanced and Compatible) installed via workaround
• DVD-ROM & HDD connected to SATA6G_M9128 PCI-Express SATA addon controller and installed flawlesly.
• After installation replaced IOATAFamily for Lion in /System/Library/Extensions and reconnected to SATA port
• on P5B-DE and booted flawlessly.

• ASUS Pundit3
• Intel Core 2 Duo E4500 @ 2.20 GHz
• 2 GB 800 MHz CL5 DDR2 SDRAM
• Intel GMA X3000
• 80 GB IDE HDD
• 200 GB SATA HDD
• Samsung SATA SuperDrive

Install Method:

• iAtkos L1 .dmg file restored to, started from, and installed to IDE HDD + MultiBeast and KextBeast

Components Status:

• VGA: ok
• Audio Out (R/F): ok ok
• Audio In (R/F): X X
• USB (R/F): ok ?
• FireWire (R/F): ? ?
• Ethernet: ok
• Card Reader: ok
• SATA: ok
• IDE: ok
• eSATA: ?
• Shutdown and Reboot: ok
• Sleep: ok

• Chameleon 2.0
• FakeSMC
• JMicron IDE
• VoodooHDA v2.7.3
• Realtek RTL81xx

Remove AppleIntelGMAxyz, AppleIntelHDGraphics and AppleIntegratedFrameBuffer, then:

MultiBeast:

• System Utilities
• Chimera v1.5.4
• 32-Bit Apple Boot Screen
• EvOreboot

KextBeast:

• GMA X3000 kexts by StevO
• IOATAFamily extension for SATA

and Reboot!

• Intel Q9400 CPU 2.66 GHz @ 3.66 GHz
• 8400GS (256MB) works fully with GraphicsEnabler=y
• 2x2GB 800 MHz Ram
• Install Method: Retail Disk Image boot with myHack, then Apple Software Update to 10.7.1

Components Status:

• Audio - Built-in untested, but USB HiFis works
• Ethernet - Works
• Wireless b/g - Works (See patch column)
• USB - All Work
• SATA - All Work
• IDE - Untested
• E-SATA - Untested
• Shutdown/Reboot work 99.9% of the time.

• myHack (chameleon + other stuff)
• Built-in Realtek Wireless (RTL8187B)
• Add the italics text below to your boot.plist to stop an App Store verification error.

<key>EthernetBuiltIn</key>

<string>Yes</string>

Useful Tools

• OSX86Tools
• Kext Helper B7
• Guide

• Intel E6400 CPU 2,13 GHz @ Overclocking 2,67 GHz, FSB 1333 Mhz, BUS 333 Mhz
• ATI Radeon X1800XT (256MB DDR3 256Bit) works fully with PCI-E/ATI
• Kit DDR2 4GB (4x1) 834 MHz Ram OCZ Platinum Rev.2 Timing 4-4-4-15
• Install Method: RETAIL Disk Image (USB-DVD Image) boot_Private (KEXT-GUIDE) Edited PIEROF81

Components Status:

• Audio ALC882M Stereo L+R - Line-Out x3 24bit, Line-In x1 20bit, Integrated microphone x1 20bit, Headphones Integrated x1 24bit, S/PDIF out x1 32bit
• Ethernet - Native Works (Marvell Yukon Gigabit)
• Wireless RTL8187 b/g - 32bit Works Native Patch REALTEK and 64bit Work Kext Mod PIEROF81 [Use Private]
• USB 2.0 - Native all Work
• USB 3.0 PCIe (LACIE) - Native all Work "SUPER SPEED"
• IDE - Natine all Work
• E-SATA 3GB - Natine all Work
• Shutdown/Reboot - Work (Stop Work_Kext SleepEnabler x64)

• Built-in Realtek Wireless (RTL8187B)
• "PRIVATE" Full kext Edited PIEROF81

Tools Link

• Kext Helper B7

• Intel Core i7-920, 2.66 GHz
• Audio works
• Ethernet - works
• USB - Works
• Gygabyte Geforce Gt 430 1Gb DDR3 full QE/CI
• 6GB RAM

• Install Method: Install Mac OS X Lion.app (USB Image) and LIONIZE

• Intel Core i5-760
• EVGA GeForce 9500 GT 1GB
• Install Method: xMove
• Audio - Works with VoodooHDA
• Ethernet - Works with Lnx2Mac's Realtek RTL81xx driver
• USB 2.0 - All Work
• USB 3.0 - Untested
• FireWire - Working
• SATA 3 GB/s - All Work

• Install Using MultiBeast

Audio: VoodooHDA

Ethernet: Lnx2Mac's Realtek RTL81xx driver

• Sleep: SleepEnabler 10.7.1

• BIOS- 1001 with BlackcH boot screen mod
• Intel Q6600 CPU 2.24 GHz @ 2.76 GHz
• ASUS 8600GT (512MB) works fully with NVEnabler64.kext
• 4x2GB 800 MHz Ram
• 160GB sata boot HDD
• 500GB sata Time Machine
• Install Method: Install from 8GB USB using this method [4], then Apple Software Update to 10.7.1( uncheck security update causes a KP) No DSDT needed

Components Status:

• Audio - Built-in works with VoodooHDA 2.7.2, PKG [5]
• Ethernet - Works
• USB - All Work
• SATA - All Work
• IDE - Works
• Firewire - Not Yet
• Bluetooth- Dlink DBT 122 via usb
• Apple Trackpad Works-100% All Gestures Available
• ShutDown, Restart, Working 100 % with EVoreboot. kext.
• Dual Boot With Snow Leopard 10.6.7 100% working
• All Parts Second User And Sourced From EBAY Total Cost Including AOC F22+ FULL HD monitor £280 ($435)

• BlackCH P5K VM Boot CD For Extentions / Extra For Both

Voodoo HDA 2.7.2, EVoreboot.kext, NvEnabler64.Kext by Krazabu Chameleon v2.1 svn r1506 pkg Useful Tools

• OSX86Tools
• Kext Helper B7ß

• BIOS 1001
• Intel Core2Duo [email protected] GHZ
• Nvidia 9500 GT 1024 MB
• 250 GB System HD
• 1 TB Time Machine and Storage
• Install Method: [6]
• Audio - Works
• Sata - Works
• Firewire - Works
• USB - Works
• Video - QE/CI Works
• LAN - Works
• Bluetooth - Apple Bluetooth Module
• Trackpad and Magic Mouse 100% working
• Restart and Shutdown working 100%, Sleep need PleaseSleep.app

• ALC883 patch, NVEnabler64.kext, DSDT needed

• MSI NVidia Geforce 9400GT 1024Mb
• 4 x 1GB 800 MHz Ram Corsair
• Update from existing 10.6.8 (TonyMac´s MultiBeast)
• Install Method for 10.7: TonyMac´s xMove + MultiBeast, update over my existing 10.6.8
• followed TonyMac´s instructions. After installation of 10.7, deleted "Extra- Folder" from 10.6.8 completely, dsdt.aml and everything, installed new MultiBeast without any additional Kext´s.

Left only skge.kext for LAN (only the fastest Lan-Port of the two ports works) and voodooHda.kext for audio (from10.6.8) inside System/L/Extensions, deleted NV64Enabler for graphics. System runs perfect only with the two additional Kexts.

• Updated to 10.7.1
• Shutdown and reboot work fine. Sleep not tested. Update was very easy without ruining my existing 10.6.8, with which I had been dissatisfied (better leave your System to 10.6.7)

• skge.kext, voodooHda.kext, no dsdt

forgot to mention that I changed the BIOS long time ago with p5q-asus-deluxe-2201-mac-dsdt.rom

• Club3D nVidia Geforce 9800GT 512MB
• USRobotics AirforceOne USR5411 (Broadcom BCM4318)
• 2 x 2GB 800 MHz Kingmax, 2 x 2GB 1066MHz G.Skill
• Installed iAtkos 10.6.3
• 10.6.6 Combo Update
• followed TonyMac´s instructions (xMove + Multibeast (only DSDT + Chimera).
• Updated to 10.7.1
• Even the sleep works (didn't work in Snow Leopard).

For Snow Leopard

• default iAtkos
• Intel SATA
• Broadcom
• NVEnabler

For Lion

• Universal Voodoo HDA for sound

• CPU: Intel Core i3
• GPU: Nvidia 9500GT 1GB(Out of Box)
• RAM: 2x2GB DDR3 Corsair 1600Mhz
• HDD: Seagate SATA (AHCI mode)
• Keyboard: USB
• Mouse: Magic Mouse
• Dual Monitors using VGA and DVI from Single Video Card

Component Status:

• All works

I used tonymac method to install the Lion (Snow Leopard working + xmove). Downloading 10.7.1 from Mac App Store did not present any issues.

• Chimera (from MultiBeast) + arch=x86_64

VoodooHDA from Multibeast. Edit .plist for Voodoo to reduce gain at boot.

• Intel Core i7 860 @ 2.80ghz
• NVIDIA 9800GTX+ 512 MB
• 4GB RAM DDR3 1066Mhz
• Install method - iBoot + Snow Leopard USB
• Update to 10.7.0 from tonymac's method. 10.7.1 from software update.
• Audio - Works
• Video - Works
• Ethernet - Realtek kext from multibeast.
• Sleep/Wakeup - Not working (No sleepenabler though, havent tried.)
• Shutdown/restart - Works OOB

• Audio - VoodooHDA
• Video - Kext from multibeast

• Pentium DC E5200 OC'd @ 3.2 GHz
• Flashed ECS G31T-M (see 10.5.6 HCL)
• 2 GB Ram

My method of install was Niresh12495-Lion, Google it. After I gathered everything necessary for the install, I restored the Niresh image (Its untouched, maybe slight modifications to the install disk, but everything for the most part is pure Lion and Vanilla, there are no kexts or anything included with the install) to a restore partition I created, and used the tools that came with it all to make it bootable. TIP: The boot loader theme it comes with is really nice, but Niresh added a picture of himself to selection screen, so after you make the drive bootable you'll want to go into the /Extra/Themes folder of the Restore drive you just created and change the "background.png" with something you like. I personally got an un-modified version of the one that Niresh put his picture on.

Continuing on, my GPU (An HIS Radeon 4670) which is another really-uncompatible piece (Just my luck) works perfectly with Snow Leopard after updating to 10.6.8, but in Lion it requires a DVI to VGA plugged into the DVI slot and then just Plug your Monitor's VGA into the VGA slot on your card (not the DVI to VGA). At least it gets Full QE/CI!

Ethernet, unlike snow leopard, does NOT work out of the box and neither does sound. But Luckily, Realtek has released kexts for mac. You'll want the OS X drivers for
RTL8102E(L)/RTL8101E/RTL8103T
RTL8401/RTL8401P/RTL8105E
RTL8402 Realtek 8101E just scroll all the way down until you see their OS X download Links. For sound you need ALC662 which can be Downloaded here, they're for GA-945GCM-S2L (It will still work for our ECS G31T-M) Double-Click and Install "Azalia 12.0.5" Only.

After Installing the Ethernet drivers, AppStore still won't work, It returns an error that computer or device is not "valid". To fix this I followed someones pretty quick, simple guid. Here's the post.

Lastly but definitely not least, It updates through software update with NO problem like a real mac!! Just a note from previous experiences, If you ever do update and can't get back in (no screen, or garbled) then try getting in with safe mode (-x at boot) as something may have gone wrong with your GPU kexts from the update. Hope this works for you! Good Luck!

• Intel Core i3 550 @ 3.20 GHz
• Nvidia 9800gt ECS edition works fully with NvEnabler
• 3x4GB=12Gb 1333 MHz Ram
• Install Method: Retail USB Disk Image Lion 10.7 + update 10.7.1
• Audio - ACL662 Works!
• Ethernet - intel82578 Gigabit LAN Controller Works!
• USB - All Work
• SATA - All Work
• IDE - No Support
• E-SATA - Untested
• Shutdown/Reboot work 100% of the time.
• Non used DSDT.

• Audio(voodooHDA),LAN & Graphics (NvEnabler)[8]
• Chameleon VS [vs.html ]

• BIOS updated : 6B3F1P43
• Intel Core 2 Duo E4500 2.2GHz
• NVIDIA GTX275 896MB DDR3
• 4GB RAM DDR2 1066Mhz
• Install method - Installed from 8GB thumb drive
• Update to 10.7.1 by using Software Update
• Audio - Works
• Video - Works
• Ethernet - Works OoB
• Sleep/Wakeup - Works
• Shutdown/restart - Works

• CMOS reset patch
• Audio - patched AppleHDA
• Video - using DSDT patch, but also all other methods are working
• Foxconn P35A tools pack - all-in-one post-installation tool pack designed specifically for this motherboard

• BIOS updated : A48F1016
• Intel Core i7 2600K 3.4GHz
• Intel 510 Series SSDSC2MH250A2K5
• ASUS EN210 SILENT/DI/512MD3(LP) (GeForce GT210 512MB)
• Kingston KVR1333D3N9/4G (DDR3 PC3-10600 4GB) x 4
• Bootloader: Chameleon-2.1svn-r1518 with GraphicsEnabler=Yes, GenerateCstates=Yes, GeneratePstates=Yes, No Kernel Flags
• Update to 10.7.1 by using Software Update
• Audio - Not Working
• Video - Works (VGA / DVI / HDMI)
• Ethernet - Works with official driver version 2.0.6 from Realtek
• Sleep/Wakeup - Not Working
• Shutdown/restart - Works
• eSATA - Not Working
• USB3.0 - Not Working

• Extra Lion DP4.pkg

• Foxconn G41MXE-V LGA 775 Intel G41 Micro ATX Intel Motherboard
• Intel Celeron E3400 Wolfdale 2.6GHz 1MB L2 Cache
• 4GB ram
• EVGA GeForce 8600 GTS 512MB
• All defaults in configuration except I selected realtek ethernet drivers, nvenabler
• Sleep not working OOB, it seems. Don't care to try to fix it
• Shutdown/restart working
• Audio working
• Good picture over DVI on my 1080p monitor + second monitor
• Running synergy client so I can use my keyboard/mouse from my main windows box. Highly recommended - just move mouse across to mac screen. Double click broken in beta client on lion; use stable.

• BIOS FC
• Intel Core i3-540
• Memory: 12 GB (2x2GB and 2x4GB) Kingston DDR3 RAM
• VGA: Apple OEM nVidia 7300 GT Pulled from Mac Pro
• Audio : Full working with applehdaudio rollback
• Network Full working
• Graphic Full working
• USB3 working with MultiBeast installed drivers
• Gigabyte SATA3 working fine

• BIOS FC
• Intel Core i7920 (D0) @ 3.50 GHz
• Memory: 6 GB (3x2GB) Corsair XMSII DDR3 RAM
• VGA: Sapphire Radeon HD4870 512 Mb DDR5 PCI-E working out of box
• Audio : Full working with applehdaudio rollback
• Network Full working
• Graphic Full working with QE/CI
• USB3 working with lacie USB3 drivers
• Gigabyte SATA3 working fine

• BIOS updated : September, 06 2010
• Intel Core 2 Duo 2.7 Ghz
• Memory : 2GB of Ram - 1333 Mhz (DDR3)
• VGA : nVidia Geforce 8400 GS 512 MB

• Monitor : Hp w1707 with connect by DVI Cable
• Hard Disk : Seagate 1TB

• Installed 10.7 Final on Mac App Store by Hackboot v6.2 CD
• Use hackboot v6.2 to boot EFI first and then install by tut split my HD with new partition (10GB) to restore install InstallESD.dmg on that disk to install.
• Bootloader - Chameleon 2.0 RC5 r1191 [VS] (Tested on July 20, 2011)
• DSDT created by DSDT autopacher and it's so amazing :)
• Audio - Voodoo HDA 0.2.62 (x86_64) driver Modded to link from Speaker to PCM with Volume Control worked perfectly.
• Video - nVidia Geforce 8400 GS 512 MB (works with nVEnabler64.kext)
• SATA - AHCI in BIOS (Set up default on BIOS)
• Ethernet - AtherosL1Cthernet.kext (the below link it's lastest version to fix any random kernel Panic).
• Sleep & Wakeup : Works perfectly, no need to install SleepEnable.kext !
• Here all my file with GA-G41M-Combo for Lion: [9] (Found on a haft of day to take full files)
• Default Lion will be using 64 bit kernel

• CPU: Intel Core2 Quad Q8300 @2.50 GHz "OK"
• GPU: XfX Nvidia GTS250 512MB "OK"
• iGPU: GMA 3100 "Not working"
• RAM: 2x2GB Kingston DDR2 800MHz "Ok"
• NETWORK: Atheros L1 Lan, Working with AtherosL1Ethernet.Kext
• AUDIO: Working with DSDT patch and Legacy HDA

Sleep Works ! Booting with Chameleon 2.0 RC5 775r

• CPU: Intel Core2 Conroe 2.66GHz "OK"
• GPU: XfX Nvidia 8800GTX 768MB "OK"
• RAM: 2x4GB G.Skill DDR2 800MHz "Ok"
• AUDIO: Fully working
• Graphics QE/CI working
• Sleep Works

• Install using xBoot method; note com.apple.Boot.plist must be set to values that the Lion installer recognizes, else it won't install. Also note that DSDT must be correct, else the installer will KP
• Bootloader is Chimera/Chameleon 2RC5
• DSDT built using Auto Patcher 0.6
• Network requires AppleRT8169Ethernet.kext
• AUDIO: Voodoo HDA, fully working

• BIOS: F11
• CPU: Intel Core i7-860 @ 2.80 GHz
• GPU: Zotac NVIDIA GTX 470 AMP! 1280 MB
• RAM: Kingston HyperX 8 GB (4x2GB) DDR3 1333 MHz
• OOD: Samsung SH-D163B DVD-ROM, SATA (AHCI mode)
• Keyboard: Apple Keyboard, USB
• Mouse: Apple Magic Mouse, USB-Bluetooth Dongle (DIGITUS DN-30200)

Component Status:

• All works

• Install Method: from Partition (MaLd0n's USB Install Guide)
• Bootloader: Chameleon 2.0 RC5 r1238
• Kext (all used Kexts from MultiBeast 3.8.0):
• NullCPUPowerManagement
• FakeSMC
• EvOreboot (Shutdown/Restart)
• USB: IOUSBFamily Rollback
• Disk: IOAHCIBlockStorageInjector
• Audio (Realtek ALC888B): ALC8xxHDA, AppleHDA Rollback, ALC887/888b Enabler
• Ethernet (Realtek RTL8111D): Lnx2Mac's RealtekRTL81xx Ethernet (edit in /Extra/org.chameleon.Boot.plist: EthernetBuiltIn=Yes (for App Store verify))
• Graphics: edit in /Extra/org.chameleon.Boot.plist: Kernel Flags: npci=0x2000 PCIRootUID=1; GraphicsEnabler=Yes; OpenCL Patch by netkas (using HexEdit)
• All works great, except sleep

• BIOS: F14
• CPU: Intel Core i5-760 @ 3.80 GHz OC Lynnfield
• GPU: ASUS nVidia GTX 550 Ti! 1536 MB
• RAM: GSkill Ripjaws X Series 8 GB (2x4GB) DDR3 1866 MHz
• OOD: Samsung SH-D163B DVD-ROM, SATA (AHCI mode)
• Keyboard: Logitech S520, USB
• Mouse: Cyborg RAT3, USB

Component Status:

• All works

• Install Method: from Partition ([10])
• Bootloader: Chameleon 2.0 RC5 r1238
• Kext (all used Kexts from MultiBeast 3.8.0):
• NullCPUPowerManagement
• FakeSMC
• USB: IOUSBFamily Rollback
• Disk: IOAHCIBlockStorageInjector
• Audio (Realtek ALC889): Modded AppleHDA for ALC889 Lion from kexts.com
• Ethernet : Lnx2Mac's RealtekRTL81xx Ethernet (edit in /Extra/org.chameleon.Boot.plist: EthernetBuiltIn: Yes (for App Store verify))
• Graphics: edit in /S/L/E NVDAGF100Hal.kext add dev id 0x124410de&0xffc0ffff and ATY_init in S/L/E
• All works

• BIOS: F6
• CPU: Intel Core i5-2500K @ 3.29 GHz
• GPU: MSI nVidia GTX 460 768 MB
• RAM: Kingston (KVR1333D3N9 / 4G) 8 GB (2x4GB) DDR3 1333 MHz
• OOD: PIONEER BD-RW BDR-206, SATA (AHCI mode)
• Keyboard: USB
• Mouse: USB

Component Status:

• All works

• Install Method: Iatkos L1
• Bootloader: Chameleon 2.0 RC5 r1238
• DSDT GA-Z68XP-UD3-F6
• Audio (Realtek ALC889): Modded AppleHDA for ALC889 Lion from kexts.com
• Ethernet : RTGNICv2.0.6.mpkg
• Graphics: NVDAGF100Hal.kext, GeForceGLDriver.bundle, AppleGraphicsPowerManagement.kext
• All works

• Install Method;[11]

Components:

• Intel Core Duo E6500 2.93Ghz
• Sata HDD's x 4 x 2TB
• IDE 750GB HDD x 2
• 8GB (2x4GB) 1066 MHz DD3
• Nvidia GT430 1GB
• Asus DVD-RW
• Logitech Webcam C905
• Generic Chinese Bluetooth usb dongle
• TP-Link WN551G PCI WIFI CARD
• Apple USB Keyboard
• Magic Trackpad and Mouse

Some Minor Issues I had to correct;

• Could not log into Mac App Store fixed by adding ethernet string for the MB's onboard Ethernet to com.apple.boot.plist in Extra folder

I still need a solution for;

• Airdrop does not work with the pci wifi card but otherwise no problems

full guide for this board working 100% is available at Click here for Guide

• Install Method;(Download Package & Manual)

Components:

• Intel Core2Quad Q8300
• Corsair 60GB SSD
• Corsair DDR2 800MHz
• ATI HD4670 GPU
• Pioneer DVD-RW
• 2xVIA VT6306/L Firewire Card (Two slot working)

• DSDT
• fakesmc.kext
• JMicronATA.kext
• alc888b.kext

• Install Method;(Download Package & Manual)

Components:

• Intel Core2Quad Q8400
• OCZ Vertex2 60GB SSD
• Corsair DDR2 800MHz
• Nvidia 9500GT GPU
• Pioneer DVD-RW
• 2xVIA VT6306/L Firewire Card (Two slot working)

• DSDT
• fakesmc.kext
• JMicronATA.kext
• alc888b.kext

• Used Hackboot-v6.2 to boot at first, after initial install reboot with Hackboot do usual formalities once in Lion environment, used DSDT Auto-Patcher to create a dsdt.aml * used Multibeast 3.7.3, did install with dsdt support (nothing else checked)
• this worked for HDD boot and my Video card NVidia GS-8400 (0x06e4-0x10de) full QE-CI 1080P all resolutions unlocked via DVI-HDMI
• Audio installed with AzaliaAudio.pkg
• Network installed with Kext Wizard (used AtherosL1cEthernet.kext)
• Asus Bluetooth USB-BT21 Dongle working OOB
• wireless card Asus WL-138g V2 PCI fully functional OOB

• Install Method:[12]
  

I used the Mac Pro 4,1 extra zip under the post install section, others may work too.
Component Status:

• Sound not working (yet)
• Ethernet working (used RealtekRTL81xx then showed up for me as Bluetooth PAN)
• USB3/Gsata not tested.

• FakeSMC.kext
• AHCIPortInjector.kext
• IOACHIBlockStorageInjector.kext

Not Include and needed:

• DSDT Auto-Patcher
• Chameleon Bootloader

• Install Method: Kakewalk 4.0 for Gigabyte Motherboards with GA-X58A-UD3R rev 1.0 drivers option [13]
  

Component Status:

• BIOS Ver. F3
• Sound working
• Ethernet working
• USB3/Gsata not tested.
• GeForce GT 240 512 MB working
• 8GB RAM (4x2GB) Kingston 9905403-011.A03LF
• SONY BDRW BWU-300S working
• 1 TB WDC WD10EARS-00Y5B1 Hard Disk

• Audio kext [14]

• Intel Pentium Dual Core E5800 @ 3.20 GHz
• 8 GB (2x4GB) G.Skill DDR2 PC6400 RAM
• 64 GB Kingston SSDNow V100 SSD
• EVGA GTX 460 1 GB SC GDDR5 1 GB PCI-e Graphics Card
• TP-Link TP-3269 Gigabit Ethernet
• DWA-556 Xtreme N Wireless PCI-e Card
• AZiO USB 2.0 Bluetooth 2.1 Adapter

• OS X 10.7 Lion GM (MaLd0n's USB Install Guide)
• For all working specs, please visit My Blog
• For my build site, please visit Custom Computers Blog

• Core2Duo Processor
• Build 11A511
• Working fine with Chameleon RC5 (rAndy)
• 8169 Eth. works, with 8169 kext from Snow Leo
• ALC888 works fully, with an old AppleHDA.kext (Snow Leo)

• Core2Duo E8400 Processor
• NVidia Palit 9400GT 512MB
• 4GB RAM DDR2
• Build 11A511
• Works perfect with this GA-P35-DS4-specific guide
• GraphicsEnabler=Y, no injectors

• Core2Quad Q8400 Processor
• ATI Asus HD5670 1024MB
• 2GB RAM DDR2
• Build 11A511
• Works perfect with the GA-P35-DS4-specific guide
• GraphicsEnabler=N, no injectors

• Core2Quad Q9400 Processor
• NVidia Gigabyte 9800GT 1024MB
• 8GB RAM DDR2
• Build 11A511
• Install Method: tonymacx86 xMove + MultiBeast upgrade from 10.6.8
• All works except sleep
• GraphicsEnabler=Y, no injectors

• MultiBeast with Custom DSDT
• Audio enabled using ALC8xxHDA and AppleHDA Rollback
• Ethernet enabled using official Realtek 2.0.6 drivers

• Core2Quad Q6600 Processor
• NVidia Leadtek 8800GTS 512MB
• 4GB RAM DDR2
• Build 11A511
• Works perfect with this GA-P35-DS4-specific guide
• GraphicsEnabler=Y, no injectors

• FakeSMC, DSDT gets created during install
• ApplePS2Controller.kext and AppleACPIPS2Nub.kext to make PS/2 keyboard working

• Core i5 2500k Processor
• Nvidia Geforce 460 GTX 1Gb (OC)
• 2x4GB RAM DDR3 1333Mhz
• Build 11A511
• Install Method: MaLd0n's USB stick method with Chameleon RC5 (smbios = Mac3,1), remove IOFirewireFamily otherwise KP in booting.
• All works (USB 3.0 not tested), cinebench OpenGL = 39.5fps
• GraphicsEnabler=Yes, EthernetBuiltin=Yes (otherwise App Store won't work), Kernel flag: add npci=0x2000, no injectors

• DSDT generated by MaLd0n's DSDT Auto-Patcher (for Z68 version)
• Audio enabled using ALC8xxHDA + AppleHDA Rollback + ALC889 in MultiBeast
• Ethernet enabled using official Realtek 2.0.6 drivers

• Core i7 2600k Processor @ 4.0 GHz
• 4x4GB Corsair RAM DDR3 1333Mhz
• Default Bios setting, HPET changed to 64 bits, all Sata controllers changed to AHCI, CPU multiplier changed to 40, no changing in voltages
• PowerColor ATI Radeon HD 4850 1G DDR3: ATI 48xx Patch for 10.7.1 from Multibeast 4.0.2
• On-board Giga Ethernet: Lnx2Mac's RealtekRTL81xx 0.90 install package downloaded from developer's website
• On-board sound: ALC8xxHDA.kext and AppleHDA.kext rollback
• On-board Firewire; OOB
• On-board ICH10 Sata: all working OOB (5 HDs)
• On-Board Marvell Sata controller: working without JMicron kext, but the drives connected to this controller are old and both are being recognized as IDE by the Bios, so not fully tested
• On-board eSata; not tested
• On-board USB 2: OOB
• On-board USB 3: not tested
• TP-Link TG-3269 (RTL8169SC chipset) PCI Giga Ethernet card: vanilla AppleRTL8169Ethernet.kext copied from a 10.6.8 IONetworkingFamily.kext/Contents/Plugins to the same place in original 10.7.1 kext
• TP-Link WN851N (AR5416 chipset) PCI a/b/g/n Wireless card not working: 10.7.1 moded IO80211Family.kext; interface shows fine, AirDrop shows in Finder, but connection attempts cause infant freeze (not panic, as reported by others)

• Install Method: Kakewalk 4.1.0 choosing GA-Z68X-U3H-B3 mobo and replacing DSDT file in the USB stick Extra folder with one downloaded from tonymacx86's DSDT Database
• GraphicsEnabler=No, even to install: this particular mobo+ATI card combination were hanging during boot.
• EthernetBuiltin=No (App Store not tested), Kernel flag npci=0x2000 (automatically added by Kakewalk)
• E/E/FakeSMC, E/E/ElliottForceLegacyRTC (to prevent CMOS reset), ALC8xxHDA.kext and S/L/E/AppleHDA.kext rollback, all installed by Kakewalk along with NullCPUPowerManagement and JMicron kexts. Last both deleted after install.
• Audio was enabled after install, but 10.7.1 update disabled it. Both, reinstalling Kakewalk or copying S/L/E/AppleHDA.kext (rolled back version) from backup, restored sound
• /Library/Preferences/

SystemPreferences/NetworkInterfaces.plist edited to change BSD interface names order (en0, en1, en2)

• Core2Quad Q6600 Processor
• nVidia Geforce GTX260 896 MB
• 8GB RAM DDR2 (1066 MHZ)
• Build 11A511
• Install Method: MaLd0n's USB stick method with Chameleon RC5 guide
• GraphicsEnabler=N, DSDT Edited

• DSDT generated by MaLd0n's DSDT Auto-Patcher
• Audio enabled using ALC899a.kext + Patched AppleHDA.kext audio
• Ethernet enabled using Lnx2Mac's Realtek RTL81xx Driver ethernet

• Core i5 2500 Processor
• nVidia Geforce 9400GT 1 GB
• 2 X 2GB RAM DDR3 (1333 MHZ)
• Build 11A511
• Install Method: Tonymac's XMove + Multibeast [15]
• Graphics Enabler=Yes, No DSDT

• Audio enabled by checking Apple8XXHDA, AppleHDA rollback and ALC889 in Multibeast
• Ethernet enabled by checking Realtek Gigabit Ethernet in Multibeast
• Graphics by NVEnabler.kext
• USB3.0 working
• Voodoo ps/2 Controller kext not working

• Install Snow Leopard using iBoot + MultiBeast
• Update to 10.6.8 using Sandy Bridge guide (update causes KP without UpdateHelper. Run MultiBeast for DSDT ONLY, run UpdateHelper, reboot, run 10.6.8 Combo Updater, run MultiBeast again (DSDT ONLY), reboot, install LAN and audio kexts with MultiBeast)
• If using Intel HD 2000 video (integrated into CPU), screen is black after 10.6.8 update reboot. Shutdown system after update, install 3rd party video card, turn system back on. HD 2000 is incompatible with SL. According to this thread it works on Lion (after removing a kext).
• Install Lion using xMove + MultiBeast

• Pentium E5200 Processor (OOB) by my SSDT or with "GeneratePStates=Yes" and "GenerateCstates=Yes" at org.Chameleon.Boot.plist in Extra
• nVidia MSI Geforce 240GT 1 GB DDR3 (OOB) enabled by "GraphicEnabler=Yes" at org.Chameleon.Boot.plist in Extra
• 2 X 2GB RAM DDR2 (800 MHZ)
• Mouse and Keyboard is USB
• Build 11A511
• Install Method: Install from USB FlashDrive (which restored from InstallESD.dmg) with after installed Cameleon RC5 and fakeSMC+DSDT+Smbios in Extra. After OS install, loading from FlashDrive, installing Chameleon on system disk, DSDT and Smbios at Extra and fakeSMC at S/L/E
• Use Kernel Flag "npci=0x2000" to avoid frizz on "PCI configuration beginning" and "UseKernelCache=Yes" at org.Chameleon.Boot.plist in Extra for faster loading.
• DSDT (ALC883+ all issues fixes) DSDT+AppleHDA+Fakesmc

• Chameleon2 RC5 build 1203
• DSDT without Processor and Video sections
• FakeSMC.kext with temp sensors controllers
• Audio (ALC883) enabled by DSDT and patched AppleHDA
• Ethernet (Realtek8111) enabled by EthernetBuildIn=Yes at org.chameleon.Boot.plist in Extra
• Sleep, Restart, SpeedStep all works

• Core2Duo E6300 Processor
• NVidia Gigabyte 8400GS 512MB
• 4GB Kingstom RAM [email protected]
• Dell USB Keyboard + Apple Magic Trackpad
• Install Method: tonymacx86 xMove + MultiBeast with fresh installation
• All works except HDMI audio

• MultiBeast with Custom DSDT
• Using GraphicsEnabler=Yes
• Audio enabled using ALC8xxHDA and AppleHDA Rollback

GA-P67A-UD4-B3

Intel P67

• CPU: Intel 2600k
• Graphics: Sapphire Radeon HD 6870 Fully recognized with QE/CI working
• Sound working
• Sleep Mode working
• USB 3 working in full speed
• Installed by 10.6.0 Retail DVD
• Installed Update Helper
• Updated with 10.6.8 Combo Update
• Installation & hardware recognition by iBoot + Multibeast 3.8.0
• Downloaded GA-P67-UD4-b3 DSDT from tonymac
• Upgraded Lion with xMove method

• Sound: AppleHDA Rollback, ALC8xxHDA
• Ethernet: Realtek Gigabit Ethernet 2.0.6
• FakeSMC Plugins
• USB 3.0 - NEC/Renesas

Included in MultiBeast.

Guarantee one of most recommended parts for hackintosh build in 2011. Everything just works effortlessly from installation, 64bit, audio, ethernet, graphics with QE/CI & multiple display (OOB), sleep mode just works from the moment after running MultiBeast. You can see 'Full Tutorial of Making a Hackintosh' for more information.

• Core I7 930
• EVGA NVIDIA GEFORCE GTX 275 896 MB RAM
• 12 GB RAM
• INSTALLED WITH KAKEWALK FOR LION AND THEN Updated with 10.7.1 Combo Update
• gaphics worked out of the box full resolution and everything else.
• ethernet worked with: Lnx2Mac's realtek81x driver in multibeast 3.8.0
• Sound working
• Ethernet: Ran multibeast to install Realtek gigabit network kext
• Sound: VoodooHDA, ALC8xxHDA - think some of the jack colours are mixed up, but they work

• BIOS: 5561
• CPU: Intel Core i7 3.4GHz
• GPU: ATI Radeon 5770 1024MB, XFX (miniDP not tested yet).
• RAM: 3 x 2GB Kingston DDR3 1333MHz
• OOD: Kingston 128GB SATA2 SSD
• Keyboard: Apple Aluminium Keyboard
• Mouse: Apple Magic Mouse, noname BT dongle

Component Status:

• Everything works including SSD Trim; video OOB, sleep without any sleepenabler.
• Install Method: Multibeast 3.8
• Update with 10.7.1 Combo Update
• Bootloader: Chameleon 2.0 RC5 with graphicsenabler=yes
• MultiBeast 3.8.0, including:
  • DSDT Auto Patcher
  • voodohda 0.2.1
  • hnak's AppleIntelE1000e Ethernet
• Voodohda not working after wake-up, torn sound. Will try kext upgrade.

• DSDT Auto Patcher
• SSD Trim enabler for OsX

• BIOS: 0118
• CPU: Intel Core2 Quad Q6660
• GPU: Onboard GMA3500 won't work - nVidia XFX GTS250 1GB
• RAM: 2 x 2GB OCZ Reaper HPC DDRII 800MHz
• OOD: 2x 500GB Hitachi SATAII
• Keyboard: Apple Aluminium Keyboard
• Mouse: Apple Magic Mouse,

Component Status:

• Everything works
• Install Method: DVD Install Lion
• Update with 10.7.1 Combo Update
• Bootloader: Chameleon 2.1 RC5 rev1554
  • DSDT Auto Patcher
  • voodohda 2.7.3
  • Intel5266mm Ethernet
  • Firewire OOB
  • USB OOB

• BIOS: Downgraded November 06,2009
• CPU: Intel E7500 core 2 Duo 2.93GHz
• MotherBoard: Intel DG41RQ
• GPU: ASUS GeForce 210 1GB DDR3 - works OOB (QE/CI)
• RAM: DDR2 800Mhz 2GBx2
• DVD: LG DVD-RW SATA
• HDD: WD 500GBx2 SATA
• Monitor 19" LCD: VGA
• Keyboard:PS/2
• Mouse:PS/2
• onboard Ethernet - works
• onboard Audio - works

Component Status:

• Install Method: clean install onto a NEW Partition, xMove+Multibeast [16]
• Update with 10.7.1 Combo Update [17]
• MultiBeast with Custom DSDT
• DSDT generated by MaLd0n's DSDT Auto-Patcher
• Without DSDT - Just check
  • System Utilities
  • FakeSMC
  • ElliottForceLegacyRTC
  • EvOreboot
  • NullCPUPowerManagement
  • Chimera v1.5.4 r1394
  • 32-bit Apple Boot Screen
  • MacPro3,1 smbios.plist
  • tonymacx86 Remixed theme
  • OSx86 Software.
  • VoodooHDA 0.2.6.1 (32 bit only)
  • Lnx2Mac's Realtek RTL81xx Driver
  • Voodoops2controller (32 bit only)
• Sleep & Wakeup - Works perfectly, no need to install SleepEnable.kext
• BIOS SETUP - 1. Load default on BIOS, 2.Setup drive mode Legacy and SATA only, 3.Boot->UEFI->Enable
• I have dual boot windows and LION on GPT, windows7 was already installed
• Sound, LAN, Graphics Perfectly working Just multibeast it.

• PCI Configuration begin - 10.6.7 AppleACPIPlatform IOPCIFamily kexts in S/L/E
• Monitor 19": VGA Fixed to [email protected] Using ConfigX

• 8gb ddr3 1333 - to install use 4gb ram
• radeon hd4850 sapphire 512mb - ok dual display
• network intel 82579v
• realtek alc892
• usb 3.0 nec/renesas
• fw400 - native
• iBoot 3.1.1 with PCIRootUID=1 -x thanks to user raketa [18]
• installed with Multibeast 3.8.0 UserDSDT and Dsdt.aml from DSDT fixer

• DSDT.aml
• alc8xxhda, alchdaRoolBack and alc892 enabler non-dsdt
• ati hd48xx injector, ati hd48xx patch 10.6.8
• usb 3.0 nec/renesas patch
• hnak´s AppleIntele1000 Ethernet
• NullCPUPowerManagement.kext

• Motherboard Setting: Drives Controller set to: AHCI, Virtu set to disable (d-Mode will not boot osx eventhough lion already installed, haven't tried i-Mode)
• Kext Used: FakeSMC , LegacyRTC, NullCPUpowerManagement, Audiokexts from Multibeast (ALCxxx + HDA rollback + 892 Enabler) + System Definition of MacPro 5,1
• Core i5 2500K @4GHz (still detected @3.3GHz)
• Sparkle GTX460 1GB (Havent tested sound over HDMI)
• Seagate 500GB sata3 + other disks
• Samsung DVD-RW
• Onboard Lan with official Realtek driver, network > advance > hardware > configure manually> MTU > 8982 (no problem so far except its as if both LAN was used)
• Sound using ALCxxx + HDA rollback + 892 Enabler

Updated n Running Lion 10.7.1 (might need to reinstall kexts)

Intel ICH10 Chipset

• 4GB DDR2 1066 - [ P I ] F2-8800CL5D-4GBPI
• Radeon hd5570 1gb - H557F1G
• Network Realtek 8111C.
• Realtek ALC888 (2.0 Ok) (5.1 NG)
• Bios settings:
  • RAID Mode (AHCI)
  • ACPI Standby State (S3)
• Method: Install with iATKOS_L1
• Options:
• BootLoader Options
  • Graphics Enabler (NO)
  • Built-in Ethernet

• Patches
  • Extra/Extension
  • Fake MSC
  • Disabler
• RTC
  • RTC
• EvoReboot
• Drivers
  • Main Hardware
    • Sata
      • AHCI Sata Intel
      • JMicron IDE (Works Fine)
• Sound
  • Voodoo 2.2 (AppleHDA ALC8xxx & ALC888 don't work)
• USB
  • USB
• Motherboard Sensors
• VGA
  • Ati Inie
• NetWork
  • Wired
    • Realtek RTL81XX

• Private Native kext edited by PIEROF81 and ID 0x71001002 in ATIRadeonX1000.kext