HCL 10.7.2
m (→MSI) |
m |
||
Line 139: | Line 139: | ||
* Mac App Store WORKS!!! | * Mac App Store WORKS!!! | ||
* iCloud WORKS!!! | * iCloud WORKS!!! | ||
− | * MUST: Cpu | + | * MUST: Cpu Setting's [http://www.insanelymac.com/forum/index.php?showtopic=266525] |
− | * 570GTX http://www.insanelymac.com/forum/index.php?showtopic=260074&pid=1701923&mode=threaded&start= | + | * 570GTX [http://www.insanelymac.com/forum/index.php?showtopic=260074&pid=1701923&mode=threaded&start=] |
All working!!! | All working!!! | ||
Line 224: | Line 224: | ||
* Mac App Store WORKS!!! | * Mac App Store WORKS!!! | ||
* iCloud WORKS!!! | * iCloud WORKS!!! | ||
− | * MUST: Cpu | + | * MUST: Cpu Setting's [http://www.insanelymac.com/forum/index.php?showtopic=266525] |
− | * 570GTX http://www.insanelymac.com/forum/index.php?showtopic=260074&pid=1701923&mode=threaded&start= | + | * 570GTX [http://www.insanelymac.com/forum/index.php?showtopic=260074&pid=1701923&mode=threaded&start=] |
− | All working | + | All working |
Updated to 10.7.2: all working | Updated to 10.7.2: all working | ||
Line 492: | Line 492: | ||
2. BaseSystem with Packages on a external Driver or Pendrive | 2. BaseSystem with Packages on a external Driver or Pendrive | ||
− | 3. Install kexts on http://www.appunix.com.br/howto/mac-os/p5kpl-am-se-hackintosh-mac-os-x-snow-leopard-lion-kexts-necessarias/ (Portuguese) | + | 3. Install kexts on [http://www.appunix.com.br/howto/mac-os/p5kpl-am-se-hackintosh-mac-os-x-snow-leopard-lion-kexts-necessarias/] (Portuguese) |
4. Very very very Easy | 4. Very very very Easy | ||
Line 522: | Line 522: | ||
*BIOS: Store Configuration ATA/IDE Enhanced;Enhanced Mode Support:S-ATA; IDE Detect Time: 35 | *BIOS: Store Configuration ATA/IDE Enhanced;Enhanced Mode Support:S-ATA; IDE Detect Time: 35 | ||
− | *Audio - works with VoodooHDA_261_HP_HDX18 (Output and Inputs) edit Info.plist, replace the key IOPCIClassMatch by IOPCIPrimaryMatch and put the PCI ID of your audio card in string. View: http://www.insanelymac.com/forum/index.php?showtopic=267905 | + | *Audio - works with VoodooHDA_261_HP_HDX18 (Output and Inputs) edit Info.plist, replace the key IOPCIClassMatch by IOPCIPrimaryMatch and put the PCI ID of your audio card in string. View: [http://www.insanelymac.com/forum/index.php?showtopic=267905] |
*Ethernet - Works from pack Atheros AR8121 AR8113AR 8114 | *Ethernet - Works from pack Atheros AR8121 AR8113AR 8114 | ||
*USB - All Work | *USB - All Work | ||
Line 709: | Line 709: | ||
* PSW : 450 W | * PSW : 450 W | ||
'''Notes''' | '''Notes''' | ||
− | * Update BIOS with this: http://www.mediafire.com/download.php?mydxmc3gw4rurgj | + | * Update BIOS with this: [http://www.mediafire.com/download.php?mydxmc3gw4rurgj] |
− | * BIOS thread: http://www.bios-mods.com/forum/Thread-p5kc-bios-need-ahci | + | * BIOS thread: [http://www.bios-mods.com/forum/Thread-p5kc-bios-need-ahci] |
* Chimera bootloader | * Chimera bootloader | ||
|'''Kexts''' | |'''Kexts''' | ||
Line 774: | Line 774: | ||
* Bios revision 0901 you can save your bios setting under tools in your bios :) 32 bit Q6600 CPU @ 2.4 Ghz overclocked in bios to q6800 6gb ram 2 1gig 2 2gig all by ocz | * Bios revision 0901 you can save your bios setting under tools in your bios :) 32 bit Q6600 CPU @ 2.4 Ghz overclocked in bios to q6800 6gb ram 2 1gig 2 2gig all by ocz | ||
*After installing IPC 10.5.6 or Hazard 10.6.6i follow youtube video [http://www.youtube.com/watch?v=MdaUU0pNLBQ&feature=related] after snow leopard 10432 which is 10.6.0 is installed use the combo update by apple 10.6.8v1.1 Do not use software update causes issues | *After installing IPC 10.5.6 or Hazard 10.6.6i follow youtube video [http://www.youtube.com/watch?v=MdaUU0pNLBQ&feature=related] after snow leopard 10432 which is 10.6.0 is installed use the combo update by apple 10.6.8v1.1 Do not use software update causes issues | ||
− | * Sound=Voodoohda.kext works no digital audio yet..airfoil is what I used to get audio to stream to airport express for the time being. Also if using vlc delay audio to -2050. Want to turn your hack into a airplay speaker? http://asktherelic.com/2011/04/11/air-speakers-for-everyone/ autostart? https://github.com/albertz/shairport/blob/master/INSTALL.md edit org.mafipulation.shairport.plist to change the airplay name before you load into launchctl | + | * Sound=Voodoohda.kext works no digital audio yet..airfoil is what I used to get audio to stream to airport express for the time being. Also if using vlc delay audio to -2050. Want to turn your hack into a airplay speaker? [http://asktherelic.com/2011/04/11/air-speakers-for-everyone/] autostart? [https://github.com/albertz/shairport/blob/master/INSTALL.md] edit org.mafipulation.shairport.plist to change the airplay name before you load into launchctl |
* Video=Nvidia Gtx280 works hdmi full 1080p no audio via hdmi yet | * Video=Nvidia Gtx280 works hdmi full 1080p no audio via hdmi yet | ||
* Ethernet=Both On board nic's work. Used Netkas support files installed ionetworkingfamily.kext in S/L/E then showed the packages contents and deleted nvenet.kext in plugins then put NforceLan.0.64.5.kext (This improved the stability of the machine immensely and torrent downloads now seem stable!) | * Ethernet=Both On board nic's work. Used Netkas support files installed ionetworkingfamily.kext in S/L/E then showed the packages contents and deleted nvenet.kext in plugins then put NforceLan.0.64.5.kext (This improved the stability of the machine immensely and torrent downloads now seem stable!) | ||
Line 780: | Line 780: | ||
* Sata works | * Sata works | ||
* Usb works | * Usb works | ||
− | * Esata rocketraid 2302 port1 running a Raid10 enclosure w (4) 1TB 7200 rpm drives, port 2 using a Single HD dock with (1) 500GB 7200rpm both drives work simultaneously Enable plug and play OS in bios use maxmem=3072 as a boot flag if using 4gb of ram or more still useable if you want e-sata support. AppleNforceATA.slash.kext needs to be updated for raid support see this link http://code.google.com/p/darwin-ata/issues/detail?id=2 | + | * Esata rocketraid 2302 port1 running a Raid10 enclosure w (4) 1TB 7200 rpm drives, port 2 using a Single HD dock with (1) 500GB 7200rpm both drives work simultaneously Enable plug and play OS in bios use maxmem=3072 as a boot flag if using 4gb of ram or more still useable if you want e-sata support. AppleNforceATA.slash.kext needs to be updated for raid support see this link [http://code.google.com/p/darwin-ata/issues/detail?id=2] |
|NO | |NO | ||
Line 803: | Line 803: | ||
Install Method: | Install Method: | ||
− | * iAtkos L2 DVD Downloaded from here: http://www.kat.ph/iatkos-l2-mac-os-x-lion-10-7-2-t5989819.html | + | * iAtkos L2 DVD Downloaded from here: [http://www.kat.ph/iatkos-l2-mac-os-x-lion-10-7-2-t5989819.html] |
* Install on Guid Partition Table, MBR Not Working!!! | * Install on Guid Partition Table, MBR Not Working!!! | ||
* Customize Part: Chameleon 2.1,Graphic Enabler,Non AHCI SATA,JMicron JMB36X IDE,Voodoo HDA 2.2 | * Customize Part: Chameleon 2.1,Graphic Enabler,Non AHCI SATA,JMicron JMB36X IDE,Voodoo HDA 2.2 | ||
Line 1,058: | Line 1,058: | ||
*Hitachi 250Gb Drive | *Hitachi 250Gb Drive | ||
'''Notes:''' | '''Notes:''' | ||
− | *Works with (Lion retail USB) USE HACKBOOT LION CD http://www.insanelymac.com/forum/index.php?showtopic=256729 | + | *Works with (Lion retail USB) USE HACKBOOT LION CD [http://www.insanelymac.com/forum/index.php?showtopic=256729] |
|'''Kexts''' | |'''Kexts''' | ||
− | *FAKE SMC 3.1.0 in S/L/E http://www.mediafire.com/?d1ebuuaqcacuamw | + | *FAKE SMC 3.1.0 in S/L/E [http://www.mediafire.com/?d1ebuuaqcacuamw] |
*NullCPUPowerManagement.kext in S/L/E | *NullCPUPowerManagement.kext in S/L/E | ||
* NvEnabler 64.kext for VGA GT 210 PixelView 1GB DDR2 | * NvEnabler 64.kext for VGA GT 210 PixelView 1GB DDR2 | ||
− | *Audio uses alc 888 kexts http://www.osx86.net/view/2003-alc888.html, work with custom DSDT https://rapidshare.com/#!download|65tl4|2884325252|P31-DS3L.zip|4|R~0|0|0 | + | *Audio uses alc 888 kexts [http://www.osx86.net/view/2003-alc888.html], work with custom DSDT [https://rapidshare.com/#!download|65tl4|2884325252|P31-DS3L.zip|4|R~0|0|0] |
|{{Y}} | |{{Y}} | ||
|{{Y}} | |{{Y}} | ||
Line 1,277: | Line 1,277: | ||
*Updated to 10.7.2 via online Software Update | *Updated to 10.7.2 via online Software Update | ||
| | | | ||
− | * used tutorial | + | * used tutorial [http://osx86.transformnews.com/?p=253] |
|? | |? | ||
|{{Y}} | |{{Y}} | ||
Line 1,289: | Line 1,289: | ||
*CPU: I7 2600 | *CPU: I7 2600 | ||
*Graphics: Onboard HD 3000 Fully recognized with QE/CI working | *Graphics: Onboard HD 3000 Fully recognized with QE/CI working | ||
− | *Sound works with hdmi audio applehda.kext http://www.tonymacx86.com/viewtopic.php?t=33592&p=215126 | + | *Sound works with hdmi audio applehda.kext [http://www.tonymacx86.com/viewtopic.php?t=33592&p=215126] |
*Sleep Mode doesn't work yet haven't tried to fix it | *Sleep Mode doesn't work yet haven't tried to fix it | ||
*sata works | *sata works | ||
* RocketRaid 2302 Raid 10 port multiplier works (4) 1 tb 3.0 gb's 7200 rpm drives | * RocketRaid 2302 Raid 10 port multiplier works (4) 1 tb 3.0 gb's 7200 rpm drives | ||
| | | | ||
− | * http://www.tonymacx86.com/viewtopic.php?f=168&t=32306&hilit=ud3h+1.3 | + | * [http://www.tonymacx86.com/viewtopic.php?f=168&t=32306&hilit=ud3h+1.3] |
− | * http://www.tonymacx86.com/viewtopic.php?f=168&t=32306&hilit=ud3h+1.3 | + | * [http://www.tonymacx86.com/viewtopic.php?f=168&t=32306&hilit=ud3h+1.3] |
* The key to dsdt on this board is to use smbios for a mac mini | * The key to dsdt on this board is to use smbios for a mac mini | ||
|{{Y}} | |{{Y}} | ||
Line 1,505: | Line 1,505: | ||
|RADEON HD6850 1024MB DDR5 | |RADEON HD6850 1024MB DDR5 | ||
|Sapphire | |Sapphire | ||
− | |OOB (to enable hdmi audio http://www.tonymacx86.com/viewtopic.php?f=162&t=32037 | + | |OOB (to enable hdmi audio [http://www.tonymacx86.com/viewtopic.php?f=162&t=32037], GraphicsEnabler=No (recognized as ATI Radeon HD6xxx) |
|{{Y}} | |{{Y}} | ||
|DVI/HDMI & DVI/DVI | |DVI/HDMI & DVI/DVI |
Revision as of 18:53, 8 December 2011
|
This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
- ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
- Please add hardware into tables.
- This is for 10.7.2 builds only.
For how to edit the Wiki, please see this thread. Thank you!
You're looking for an Installation guide? see here
Contents |
Motherboards
Abit
Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
---|---|---|---|---|---|
Yes | Yes |
Asrock
Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
---|---|---|---|---|---|
G31M-S R2.0 | G31 | Sleep does not work. Everything else works fine.
System Configuration:
onboard video card do not work!!!!! |
MultiBeast settings: EasyBeast, System Utilities, VoodooHDA 0.2.1, Chimera 1.5; Tutorial here | ![]() |
![]() |
H61M-VS | Intel H61 | Sleep, Onboard Audio and Integrated Graphics not tested. Everything else works fine.
System Configuration:
|
MyHack 2.0 RC4.1, AtherosL1cEthernet.kext, AppleACPIPS2Nub.kext, ApplePS2Controller.kext | ![]() |
![]() |
asrock-wolfdale 1333-d667 R2.0[1] | ICH7 | System Configuration:
|
Patches
|
![]() |
![]() |
P67 Pro3 SE | Intel P67 | Everything works fine.
System Configuration:
|
![]() |
![]() | |
P55 Pro/USB3 | Intel P55 | Slepp is not working, everything other works fine.
System Configuration:
|
|
![]() |
![]() |
Asus
Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches
| ||
---|---|---|---|---|---|---|
Asus Maximus IV Gene-z | Intel Z68 | System configuration:
|
Installation method:
- iAtkos L2 selecting:
All working!!! Updated to 10.7.2: all working |
![]() |
![]() | |
Asus P5QL Pro | Intel P43 | System configuration:
|
Installation method:
- Retail (Used UniBeast to make bootable installer from 10.7.0 DMG)
|
![]() |
![]() | |
Asus P8P67 | Intel P67 | System configuration:
|
Installation method:
- Any iso from internet, mac lion + MultiBeast:
USB3 and build GPU not work for me. Updated to 10.7.2: all working |
![]() |
![]() | |
Asus Maximus IV Gene-z | Intel Z68 | System configuration:
|
Installation method:
- iAtkos L2 selecting:
All working Updated to 10.7.2: all working |
![]() |
![]() | |
P5N-E SLI | Nvidia Nforce 650i SLI | System configuration:
|
Installation method:
- iAtkos L1 selecting:
add manually kexts for Nvidia ATA & Nvidia LAN (see verdant post on insanelymac.com) into folder system of installation flash after installation add above kexts into system\library\extention and repair permission after load system by kext utility. All working!!! Updated to 10.7.2: all working |
![]() |
![]() | |
P5K-E/WiFi AP Solo | Intel P35/ICH9R | System configuration:
|
Installation method:
- iAtkos L1 selecting:
All working!!! Updated to 10.7.2: all working |
![]() |
![]() | |
P5QL-E | P43 | Configuration
|
Patches
|
![]() |
![]() | |
P5QL-EM | P43 | Configuration
|
Patches
Install Method: Unibeast Based |
![]() |
![]() | |
P5W DH Deluxe WIFI | Intel 975X Intel ICH7R | System Configuration:
Components Status:
|
Patches
THINK DIFFERENT HACKINTOSH |
![]() |
![]() | |
P5E3 Premium/Wifi-AP | Intel X48 - ICH9R SATA | Intel Q9550 CPU 2.82 GHz @ 3.4 GHz
Installation method: xMove + MultiBeast
Needed:
After Install:
|
Patches'
|
![]() |
![]() | |
P6X58D-E | X58 | Bootloader is slow but works tested with 10.7.0 /1 /2 | LAN Kext (Adapter 88E8056 AppleYukon2.kext) and audio Kext ALC8XX + applehda rollback using multibeast. | ![]() |
![]() | |
P8P67 LE | P67 | 100% Working | Just bootloader (Chimera) and audio/LAN kexts. | ![]() |
![]() | |
P5K Premium/WiFi-AP | P35/ICH9R | System Configuration:
Components Status:
|
Patches
Useful Tools |
![]() |
![]() | |
P5KPL-AM/PS | Intel (R) G31 | Hardware:
Notes
|
Kexts
|
![]() |
![]() | |
P5KPL-AM/SE | Intel (R) G31 | Hardware:
Install Method: 1. Bootcd HMBT LION DP4 with nvenabler or without nvenabler (http://www.hmbt.org/forum) 2. BaseSystem with Packages on a external Driver or Pendrive 3. Install kexts on [9] (Portuguese) 4. Very very very Easy 5. Install Chameleon 2 RC5 r1020 HMBT LION and SNOW 6. Thanks for HMBT (Hackintosh Brasilian Team, the bests) 7. 9800T Graphics Enabler (Full, Dual Display, Full Acelaration) |
Kexts
|
![]() |
![]() | |
P5KPL-AM EPU | P35 + ICH9, BIOS 501 | Hardware:
Notes
Install Method:
|
Patches
'
Useful Tools
|
![]() |
![]() | |
Maximus IV Extreme B3 | Intel (R) P67 | System Configuration:
Component Status:
Install Method: 1. Used VMWare with a preinstalled image. Mounted my hard drive into VMWare and installed to physical drive. |
Kexts
|
![]() |
![]() | |
P8Z68 Deluxe | Intel (R) z68 | System Configuration:
Component Status:
Install Method: 1. Clean GM Install, then update. Dual booting with windows 7 UEFI installation without issue! Bootloader latest Chameleon with GraphicsEnabler=Yes and npci=0x2000. (on external thumb drive couse of the efi boot) Sorry for my BAD english |
Kexts
|
![]() |
![]() | |
P7H55D - M EVO | INTEL H55 | System Configuration:
Component Status:
After using Mac App Store 10.7.1 I was able to use the 10.7.2 ComboUpdate. I've had no issues and I did not need to reapply any patches. |
Patches
VoodooHDA from Multibeast. Edit .plist for Voodoo to reduce gain at boot. This patch was done at initial 10.7.1 install. |
![]() |
![]() | |
Maximus IV Extreme B3 | Intel (R) P67 | System Configuration:
Component Status:
Install Method: 1. Used Lion 10.7 GM USB Hack (google it) 2. Copied DMG to Snow Leopard mounted restored to flash drive 3. booted off flash drive and installed 4. boot into snow leopard ran extra lion to install on drive that had lion 5. downloaded Fake SMC put on lion drive 6. used multi beast for lion and installed cpu powermanagment to lion drive 7. boot into lion run multi beast for audio and network reboot 8. ran updates from software update |
Pathces
|
![]() |
![]() | |
P5KС | Intel (R) P35 | Hardware:
Notes |
Kexts
|
![]() |
![]() | |
Sabertooth P67 | INTEL P67 | Hardware:
Notes
|
Kexts | |||
Striker II NSE | Nforce790i SLI | Kexts used in S/L/E all in verdants v2.3 support files Install them there or you will have issues
Files in Extra
Files in E/E
My org.chamelon.Boot.plist
|
|
NO | ![]() |
![]() |
Asus P5K-VM | Nvidia GeForce 8600 GT 256 MB | System Configuration:
Install Method:
|
![]() |
![]() | ||
P5L-MX | Nvidia GeForce 9600 GT | System configuration:
(2M Cache, 2.40 GHz, 800 MHz FSB)
|
Installation method:
|
![]() |
![]() | |
P5Q Deluxe | Intel P45 | System configuration:
|
Installation method:
All working!!! |
Not tested yet | ![]() |
ECS
EVGA
Foxconn
Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
---|---|---|---|---|---|
P35A | Intel P35/ICH9 |
System Configuration:
Notes:
Components Status:
|
Personal note:
Patches:
|
![]() |
![]() |
G41M-S | Intel G41/ICH7 |
Install Method:
Notes:
|
|
![]() |
![]() |
Gigabyte
Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
---|---|---|---|---|---|
GA-P31-DS3L | Intel P31 ICH7 | Hardware:
Notes:
|
Kexts | ![]() |
![]() |
GA-P31-DS3L | Intel P31 ICH7 |
|
|
![]() |
![]() |
X58A-UD7 | Intel X58A ICH10 | Hardware:
Notes:
|
Kexts
|
![]() |
![]() |
X58A-UD3R Ver 2.0 bios FF | Intel X58A ICH10 | Hardware:
Notes:
|
Kexts
|
![]() |
![]() |
GA-EP35-DS3P | Intel P35 ICH-9R |
|
![]() |
![]() | |
GA-EP45-UD3R rev 1.1 | Intel G31/ICH7 | System Configuration:
|
|
![]() |
![]() |
GA-G31M-ES2L rev 2.4 | Intel G31/ICH7 | System Configuration:
|
|
![]() |
![]() |
GA-EP45-DS4 rev 1.0 | Intel P45/ICH10R | System Configuration:
Note:
|
Selections:
|
![]() |
![]() |
GA-Z68X-UD3-B3 | Intel Z68/ICH10 | Hardware:
Notes:
|
Kexts:
|
![]() |
![]() |
GA-Z68X-UD4-B3 | Intel Z68/ICH10 | Hardware:
Notes:
|
Kexts:
|
![]() |
![]()
|
GA-EP43-UD3L | Intel P43+ICH10 |
|
|
![]() |
![]() |
GA-EP41-UD3L |
Intel G41 / ICH7 Chipset |
|
|
? | ![]() |
Z68X-UD3H-B3 |
Perfect chipset |
|
![]() |
![]() |
Intel
Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
---|---|---|---|---|---|
DH67BL | H67 | Intel® Core i7 2600
|
UserDSDT Install
|
![]() |
![]() |
DP67DE B3 | P67 | Intel core i3 2100 ok
|
UserDSDT Install
|
![]() | |
DX58SO | X58 | Intel core i7 920
|
UserDSDT Install
|
![]() |
![]() |
D945GCNL | Intel D945 ICH7 | Intel E6600 Core2 Duo - 2GB + 2GB DDR2 - GMA950 - AHCI Mode SATA
|
Extra
S/L/E
|
![]() |
![]() |
MSI
Hardware Name | Chipset | Notes | Patches Used | 32/64bit working with patches | |
---|---|---|---|---|---|
H55M-E33 | Intel H55 | System Configuration:
Installation: I tried to upgrade my Snow Leopard Installation with tonymac86's guide but i failed. The Installer-partition was not fully bootable until I copied my SL-/Extra onto it. Afterwards Installation was possible and i did a fresh install. |
Patches via Multibeast 4.0.3:
Sleep:
|
Yes | Yes |
Graphics Cards
Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.
PCI-E
AMD/ATI
Model | Board-Manufacturer | Notes | QE | Output | Dual Display | 32/64bit | |
---|---|---|---|---|---|---|---|
X1800XT | MSI | Native Support by PIEROF81… | ![]() |
2x DVI | ![]() |
![]() |
![]() |
Radeon HD 4350 512MB DDR2 | HIS | Follow this tutorial | ![]() |
DVI | ![]() |
![]() |
![]() |
Radeon HD 4850 512MB | Sapphire | Needed "Legacy4800Controller.kext" in the E/E. Occasional glitches (static on screen for a few seconds) when returning from sleep.GraphicsEnabler=Yes | ![]() |
DVI | ![]() |
![]() |
![]() |
HD5870 1024MB Vapor-X | Sapphire | OOB | ![]() |
DVI | Not Tested | ![]() |
![]() |
RADEON HD6850 1024MB DDR5 | Sapphire | OOB (to enable hdmi audio [33], GraphicsEnabler=No (recognized as ATI Radeon HD6xxx) | ![]() |
DVI/HDMI & DVI/DVI | ![]() |
![]() |
![]() |
HD 6870 | Sapphire | Sapphire 11179-09-20G HD 6870 1GB GDDR5 Native Support | ![]() |
VGA/DVI/HDMI | ![]() |
![]() |
![]() |
HD 6670 | Sapphire | Sapphire HD 6670 512MB GDDR5 Native Support | ![]() |
VGA/DVI/HDMI | ![]() |
![]() |
![]() |
HD 6870 | XFX | Native Support | ![]() |
VGA/DVI/HDMI | ![]() |
![]() |
![]() |
HD 5770 1GB GDDR5 | XFX | Native Support | ![]() |
VGA/DVI/HDMI | ![]() |
![]() |
![]() |
HD6950 2048MB/1024MB | XFX/Asus | Works with Netkas 6970 fix and flashed to 6970 BIOS. UVD does not currently work (iTunes cover flow) | ![]() |
DVI/VGA/HDMI | ![]() |
![]() |
![]() |
HD5670 1024MB | powercolor | OOD,you need to have graphice enabler =Y,and the aticonfig=Vervet [Vervet is case senstive] | ![]() |
HDMI working in full 1080p didn't test other ports | ![]() |
![]() |
![]() |
Radeon HD 4870 | XFX | Native Support | ![]() |
DVI | ![]() |
![]() |
![]() |
NVIDIA
Model | Board-Manufacturer | Notes | QE | Output | Dual display | 32/64bit | |
---|---|---|---|---|---|---|---|
8400 GS 512MB DDR3 | Zotac | Works OOB with GraphicsEnabler=Yes , see [34] | ![]() |
2xDVI/HDMI | ![]() |
![]() |
![]() |
8400 GS 256 or 512MB | PNY | Works with GraphicsEnabler=y | ![]() |
2xDVI/mHDMI | ![]() |
![]() |
![]() |
ASUS EN8800GTS 512 G92 | ASUS | works full qe/ci with these [35]. Install the kexts with the program provided.If doesn't work try changing the device id in the info.plist of the kext with your own(you can find it in system profiler) | ![]() |
2xDVI | ![]() |
![]() |
![]() |
9500GT | XFX | 1 GB model with NVEnabler 64.kext And with GraphicsEnabler=Yes in com.apple.Boot.plist Inside Extra Folder, DVI works Great (but VGA also Works. Defect is that When You Try To Change Resolution Monitor Goes OFF must Restart For Changing Resolution) | ![]() |
VGA/DVI/HDMI | ? | ![]() |
![]() |
9500GT | inno3d | 1 GB model with NVEnabler 64.kext | ![]() |
VGA/DVI/HDMI | ![]() |
![]() |
![]() |
9600M GS 512MB | Works with GraphicsEnabler=yes npci=0x2000 | ![]() |
HDMI | ![]() |
![]() |
![]() | |
9600GT 512MB | Works with GraphicsEnabler=yes npci=0x2000 | ![]() |
HDMI | ![]() |
![]() |
![]() | |
9600GT 512MB | MSI | GraphicsEnabler=Yes | ![]() |
DVI/DVI | ![]() |
![]() |
![]() |
9800GT 1GB | ??? | G92 Enabler from iAtkos L1 | ![]() |
VGA/DVI/HDMI | ![]() |
![]() |
![]() |
210 512mb GDDR3 | ASUS | GraphicsEnabler=Yes npci=0x2000 | ![]() |
VGA/DVI/HDMI | ![]() |
![]() |
![]() |
210 1024MB GDDR2 | Galaxy | GraphicsEnabler=No, Use OSX86Tools to create a custom EFI String. See [36] for directions. Worked instantly on reboot without causing other issues. | ![]() |
VGA/DVI/HDMI | ![]() |
![]() |
![]() |
EN210 SILENT/DI/512MD2(LP) | ASUS | GraphicsEnabler=Yes npci=0x2000 | ![]() |
VGA/DVI/HDMI | ![]() |
![]() |
![]() |
GTX275 896MB DDR3 | Leadtek | All methods working: DSDT patch, EFI string or NVenabler64.kext; | ![]() |
DVI/DVI/ | ![]() |
![]() |
![]() |
GT 430 1 GB | Pixelview | Followed 3rr0rists guide | ![]() |
VGA/DVI/DVI/HDMI | ![]() |
![]() |
![]() |
GTX 460 1GB | Gainward | GraphicsEnabler=Yes npci=0x2000 | ![]() |
DVI | Not Tested | ![]() |
![]() |
GTX 460 GLH 1024MB | Gainward | Works with GraphicsEnabler=Yes and PCI Configuration Fix (npci=0x2000) | ![]() |
VGA/2xDVI/HDMI | ![]() |
![]() |
![]() |
GTX 460 SC 1GB | EVGA | GraphicsEnabler=Yes npci=0x2000 | ![]() |
DVI/DVI/mHDMI | ![]() |
![]() |
![]() |
GTX 465 1GB | Zotac | Installed GF100 10.7.2 Driver from Multibeast, GraphicsEnabler=Yes npci=0x2000 | ![]() |
2xDVI/mHDMI | ? | ![]() |
![]() |
GTX 480 | MSI+ZOTAC | Works OOB with iAtkos Lion GraphicsEnabler=Yes npci=0x2000 | ![]() |
2xDVI/mHDMI | ![]() |
![]() |
![]() |
GTX560 1GB | Zogis | added device id to NVDAGF100hal. GraphicsEnabler=Yes, npci=0x2000, PCIRootUID=1 in boot.plist, Use GTX5XX Enabler from Kexts.com,
Thats it |
![]() |
2xDVI/mHDMI(no audio) | ![]() |
![]() |
![]() |
GTX 560 ti 1GB | MSI | added device id to NVDAGF100hal.kext, installed ATY_init.kext, GraphicsEnabler=Yes, npci=0x2000, followed this guide,
installer here |
![]() |
2xDVI/mHDMI | ![]() |
![]() |
![]() |
GTS 250 512Mb | Asus | Using MultiBeast, in "Customization"/"Boot Options", check "32-bit Apple Boot Screen" and "PCI Root ID Fix", reboot. If you still have only one resolution, edit "com.apple.boot.plist" file (use Finder to locate it) and add/replace the following lines:
|
![]() |
DVI | ? | ? | ![]() |
Network Cards
Wireless
Interface | Standard | Device | Manufacturer | Chipset | Notes | 32/64bit working with patch | |
---|---|---|---|---|---|---|---|
PCI | 802.11n 300Mbps | DWA-547 | D-Link | Atheros | Works as native Airport Extreme card. Only need to edit IO80211Family.kext in S/L/E/IO80211Family.kext/Contents/PlugIns/AirPortAtheros21.kext/Contents/Info.plist/ add: <string>pci168c,29</string> | ![]() |
![]() |
PCI-e | Wireless-N 300MBps | DWA-556 | D-Link | Broadcom | Works OOB | ![]() |
![]() |
USB | b/g/n | TEW-649UB | TRENDnet | Download 10.6 Installer from [37] | ![]() |
![]() | |
USB | b/g/n | TEW-648UBM | TRENDnet | Download 10.6 Installer from [38] | ![]() |
![]() | |
PCI | 802.11G(108G) | DWL-G520 | D-Link | Atheros | patched IO80211Family.kext | ![]() |
![]() |
PCI | Wireless-N 300MBps | TL-WN851N | TP-Link | Broadcom | 32-bit PCI Omni Directional, 2 Detachable Antennas; Works OOB as native Airport Extreme card in all versions of OS X since 10.5. | ![]() |
![]() |
PCI | 802.11n | TL-WN951N | TP-Link | Broadcom | Works OOB | ![]() |
![]() |
USB | 802.11b/g 54Mbps | DWL-G122 | D-Link | Ralink | Download and Install in S/L/E RT73USBWirelessDriver.kext + install RalinkAirport.app + install RalinkWirelessUtility.prefPane (google) | ![]() |
![]() |
USB | 802.11b/g/n | DWA-140 | D-Link | Ralink | Works with Ralink's installer (RT2870) Download here. | ![]() |
![]() |
PCIE | 802.11n 150Mbps | TL-WN781ND | TP-Link | Atheros 9285 | Works as WI-FI. Only need to edit IO80211Family.kext in S/L/E/IO80211Family.kext/Contents/PlugIns/AirPortAtheros21.kext/Contents/Info.plist/ add: <string>pci168c,002b</string>, <string>pci168c,30a1</string> or rename Apple80211Monitor.bundle + inject in DSDT method Thread | ![]() |
![]() |
PCIE | 802.11n 150Mbps | TL-WN781N (Lite) | TP-Link | Atheros 9285 | TESTED on i5, working in Mac OS X Lion 10.7.2 (11C74), appears as "AirPort Extreme (0x168C, 0x30A1)". Needed kexts: AtherosFix.kext and IO80211Family.kext. Then edit IO80211Family.kext in S/L/E/IO80211Family.kext/Contents/PlugIns/AirPortAtheros21.kext/Contents/Info.plist/ add: <string>pci168c,002b</string>, <string>pci168c,30a1</string>. Also edited same for AirPortAtheros40.kext, as well as added to plist for AtherosFix.kext. Kext wizard to install. | ![]() |
![]() |
Wired (Ethernet)
Bluetooth Adapters
Sound Cards
Interface | Hardware Name | Manufacturer | Notes | 32/64bit working with patch | |
---|---|---|---|---|---|
USB | Sound Blaster X-Fi Go PRO USB Sound Card | Creative Labs | Plug'n'Play | ![]() |
![]() |
PCI | Sound Blaster Audigy 2 Sound Card | Creative Labs | Install kXAudioDriver-1.11b0 drivers | Not Tested Yet | ![]() |
USB | Sound Blaster X-Fi HD | Creative Labs | Works OOB | Not Tested Yet | ![]() |