HCL 10.7.2

System Configuration:

• Intel Core 2 Quad Q8400
• Gainward GTX 460 OC 1024MB

onboard video card do not work!!!!!

System Configuration:

• Intel Core i5-2500k
• XFX Ati 4850 1GB
• Wireless 802.11N Rt2860
• Stock audio
• Mouse scroll is backwards, don't know how to fix

• Multibeast 4.1.0, VoodooHDA, Ralink Kext must use arch=1386, chimera 1.6.0, EVOREBOOT for reboot and shutdown Video
• Must boot iatkos l2 using -v, might sit on saying could not find bootcache. Let it sit for about 5-10 mins, it will come up with the installer.

System Configuration:

• Pentium G620
• Nvidia 8800GT 512MB
• E-MU 0202 USB Audio Interface

• Intel Core2Duo @ 1.86 GHz
• Install Method: iATKOS L1 10.7.1 after update whit combo update lion 10.7.2
• Audio - VIA VT1708S Works!
• Ethernet - RTL8111DL Works!
• Intel® Grafics Media Accelerator 950 whit graphic enabler
• USB - All Work
• SATA - All Work use IOATAFamilyfix!
• IDE - Work
• E-SATA - Untested
• Shutdown/Reboot work 100% of the time.

• iATKOS L1 10.7.1 distro with special options VoodooHDA 2.0.1 and RTL81XX
• DVD-ROM & HDD connected to SATA6G_M9128 PCI-Express SATA addon controller and installed flawlesly.
• After installation download Multibeast and add the internet drivers for Official Realtek 2.0.6 driver for 81xx Ethernet controllers.
• also if you have a ps/2 board use a numkey for laptop and you resolve the problem at the start that says before begin please connect a mouse that resolve that problem to resolve the problem whit icloud and app store just download the last version of chimera.

System Configuration:

• Intel Core i5 2500K
• Asus HD 6950 DirectCu 2 1024MB[5]

• MultiBeast settings: EasyBeast, System Utilities, ALC 8xx, Apple HDA Rollback, HDA Enabler
• Atheros AR8151[6]
• Latest Chameleon bootloader[7]

System Configuration:

• Intel Core i5 655K
• Sapphire AMD HD6670 512MB - works out of the box
• Audio works Realtek ALC892
• Ethernet works - RTL8111E
• Install method - iAtkos L1, after upgrade to 10.7.2

• MultiBeast settings: Lnx2Mac, alc8xxhda, non dst -> alc892, voodoohda 0.22

System Configuration:

• Intel Core 2 Duo E7500 2.93GHz
• 4 Gb RAM (2x2Gb DDR3)
• PCIe Nvidia 9500GT 1Gb - onboard graphics ?
• 500Gb SATA HDD + 120Gb SATA HDD
• Audio: VIA VT1705 works with VoodooHDA
• LAN: Atheros AR8132L works with AtherosL1cEthernet.kext
• USB: all working
• SATA: working - IDE ?
• USB keyboard and USB mouse needed for install, Apple wireless keyboard and trackpad work fine with USB bluetooth adapter
• TP-Link WirelessN TL-WN851N (with AtherosFix.kext and VendorID added to IO80211Family.kext)
• OOB Bios Settings work well (Legacy USB can be left ENABLED)

MultiBeast settings:

• EasyBeast
• System Utilities
• VoodooHDA
• MacPro 3,1 System definitions

Use Atheros L1C for Snow Leopard[8] to enable ethernet. Appstore, Facetime and iCloud works fine.

• Intel i7-2600K CPU
• Keyboard: Logitech G15
• Mouse: Logitech G5
• GPU: Nvidia GTX 580
• BIOS Version: 0902

Component Status:

• Network: Works with Intel KEXT
• USB: 2.0 - OOB. 3.0 Doesn't work.

USB 3.0 devices in USB 2 ports (and visa versa) work fine, USB 3.0 devices in USB 3.0 ports fail.

• SATA: Works
• Audio: Works with ALC8xx KEXT
• Restart/Shutdown: Works
• Sleep: Doesn't recover from sleep.

Install Method:

- iAtkos L2 DVD:

• Chimera
• Intel E1000 NIC KEXT
• ALC8xxHDA.kext
• ALC889 Enabler

• GTX 5XX Enabler(with cuda) for GPU [9] (ignored PCIRootUID=1 npci=0x2000 requirements)

• Intel Core 2 Quad 9550K
• Chipset Intel X48
• ATI Sapphire 4870 Dual-DVI
• Dual Display
• Audio (SupremeFX II) works with drivers of iATKOS L2 (Only 2.0; Mic ?)
• Audio (Logitech H360 Headset) works by default
• LAN (Marvell88E8056) works with drivers of iATKOS L2
• Wireless Adapter ASUS WL-138g V2 works by default

- iATKOS L2 selecting:

• Marvell Yukon 88E8056 kext
• Voodoo HD Audio 2.2 kext
• ATY_Init and ATI 48xx (Only to make work the dual monitor, dont have sure if that make the diference)

Working:

• Shutdown/Reboot
• Mac App Store
• iCloud
• Logitech H360 Headset
• Dual Monitor

NOT Working:

• Sleep mode

• Intel Core I7 2600K
• Chipset Intel Z68
• Palit 570GTX 1280MB
• Dual Display
• Audio Works OB
• Network Works OB

- iAtkos L2 selecting:

• Crimera 1.6.1
• VoodooHDA 2.6.3
• Shutdown/Reboot work
• Mac App Store WORKS!!!
• iCloud WORKS!!!
• MUST: Cpu Setting's [10]
• 570GTX [11]

Updated to 10.7.2 works

• Intel Core I5-2500 (not K)
• Chipset Intel Z68
• EVGA GTS 450 1 GB
• Samsung 830 SSD 128 GB

- iAtkos L2 selecting:

• Chameleon
• AHCI SATA and Trim
• VoodooHDA 2.7.2
• Hardware Sensors (CPU, MB, NVIDIA)
• GF100 (open GL patch)
• Intel Network Driver

Boots like magic! Sleep appears to work!!! You need to set your sound output in pref before speakers work.

• Intel Core I5 2500K
• Chipset Intel Z68
• Asus 6870 DC 1GB
• Single Display
• Audio Works with kext
• Network Works with kext

- iAtkos L2 with MyHack chameleon boot only Selected ( + Extra won't work ) leave all at defaults

• < WORKED BUT WITH FLAWS> Download latest VoodooHDA 2.7.2 and work
• < UPDATED : WORKING SOUND WITH MIC & SPEAKERS - NO RANDOM KP >
• Using MultiBeast 4.2.1 for LiON install EasyBeast and ALC8xxxHDA, AppleHDA Rolled Back, ALC889 Enabler ( must be 889, other won't work )
• After installed it, USB will NOT WORK, must extract IOUSB file from Lion installer package and cp - r IOUSB*.* /Volumes/Your OSX Disk/System/Library/Extensions, after copy to it, since I booting by iATKOS DVD itself, no command required and it just worked ! Audio work like a charm now, both Micro and Output works, no kernel panic so far ( if installed only rolled back HDA, ALC, will get insta restart, EASY BEAST is a must for me ).
• Shutdown/Reboot work
• Network Card working from Stuffs of this good man : Network [12], or Intel Gigabit network card come along inside MultiBeast package
• Note : I 'm not using his hacked BIOS and still install well with MyHack Chameleon (boot only) + iATKOS L2.
• Make PLL Voltages disabled in MainBoard and things should be fine ( got kernel panic if PLL Voltage on sometime )
• My CPU is i5 2500k and I just leave it X.M.P Mode in AI Tweaker, CPU Auto ( not restrict ratio needed ilke i7 2600K - still working ).
• 6870 works OOB with full Resolution 1920x1080, QE/CI ( chess played well )
• Monitor : Asus VS238H monitor

Conclusion : All working after installation with iATKOS L2 + myHack Chameleon, just Audio (Voodoo HDA 2.7.2) and Network (AppleIntelE1000.kext), Mic won't work with current setup, looking around of r fixes ( Fixes found using EasyBeast + ALC889 + HDA rollBack + ALC8xxxHDA ).

• CPU: Q8300 2.5GHz Intel Core 2 Quad
• Chipset: Intel P43 ICH10
• BIOS: v1004
• Sata works no kext needed, turn on AHCI in BIOS
• Graphics: Zotac GTX 465 1GB GDDR5 (installed drivers from Multibeast,Graphics Enabler=Yes npci=0x2000)
• Audio: Realtek ALC1200, Used ALC1200_1063 AppleHDA.kext (from tonymacx86)
• LAN: Atheros 1LE, Used AttansicL1eEthernet.kext (from tonymacx86)
• Shutdown and reboot work perfectly

- Retail (Used UniBeast to make bootable installer from 10.7.0 DMG)

• Installed 10.7.0
• Installed 10.7.2 Combo update from USB stick
• Installed MultiBeast for Lion before rebooting
• Selected 10.7.2 GF100 Driver for Graphics card from MultiBeast before reboot
• Installed AttansicL1eEthernet.kext and AppleHDA.kext for ALC1200 using Kextbeast before reboot
• After reboot, went to audio settings to select Line Out
• Everything works perfectly if you use AppleHDA.kext for the ALC1200, if you try VoodooHDA, it will kernel panic on boot.

• CPU: Intel Core2duo E4500 (2m Cache, 2.20 Ghz) OC @2.7Ghz
• Ram: 2 x 1Gb. Supertalent ddr2
• Chipset: Intel 945GC / Intel ICH7
• Sata : Works
• Graphics: XFX Geforce 9500GT 1Gb ddr2 hdmi-dvi-vga : Full works
• Audio: full work
• LAN: work
• Shutdown and reboot work perfectly

• iAtkos L2 DVD
• Selected VoodooHDA (last version) for audio
• Selected NVEnabler for Graphics card
• Installed AttansicL1eEthernet.kext using Kextbeast before reboot

• Intel Core I5
• Chipset Intel P67
• Asus Radeon 5770 1024MB
• Audio No Works
• Network Works with offical driver from realtek.com or MultiBeast

- Any iso from internet, mac lion + MultiBeast:

• ALC8xxHDA
• AppleHDA Rollback
• Non-DSDT HDAEnabler/ ALC892
• Lnx2Mac's RealtekRTL81xx Ethernet
• FakeSMC
• Motherboard Plugins
• Nvidia Plugin
• NullCPUPowerManagement

USB3 and build GPU not work for me.

Updated to 10.7.2: all working

Updated Asmedia USB 3.0 for Rev3.1 Download and install USB 3.0 Boost Full Package Version V1.00.05

• Intel Core I3 2100
• Chipset Intel H61
• ASUS EN210 (GeForce 210) 1GB
• Monitor: Samsung SyncMaster 1360x768
• Audio Works
• Network Works

- iAtkos L2 selecting:

• Crimera 1.7
• VoodooHDA
• Ev0reboot
• Mac App Store, iCloud, Facetime WORK with EthernetBuiltin in smbios ( I used MacPro3,1)
• Graphic Enabler
• Lnx2Mac's RealtekRTL81xx Ethernet
• Select AHCI and set in Bios AHCI Mode
• FakeSMC

All working!! Only Sleep seems not work.

• Intel Core i7 2600k OC to 4.4 Ghz
• Chipset Intel P67
• Kingston genesis hyperX 1600 Mhz DDR3
• Motherboard integrated audio works with realtek drivers from multibeast or iAtkos customize
• Network Works with multibeast realtek driver
• MSI N550 GTX Ti OC edition

- I used iAtkos L2 DVD

• ALC8xxHDA
• AppleHDA Rollback
• Non-DSDT HDAEnabler/ ALC892
• Lnx2Mac's RealtekRTL81xx Ethernet
• FakeSMC
• Motherboard Plugins
• Graphics enabler
• NullCPUPowerManagement
• Bootloader Chameleon
• system definition either imac or mac pro

USB3 does not work. do not install USB3 driver from either customize setup or from multibeast. will cause force restart problem screen

Updated to 10.7.2: all working

• Intel Core I7 2600K
• Chipset Intel Z68
• Palit 570GTX 1280MB
• Dual Display
• Audio Works OB
• Network Works OB

- iAtkos L2 selecting:

• Crimera 1.6.1
• VoodooHDA 2.6.3
• Shutdown/Reboot work
• Mac App Store WORKS!!!
• iCloud WORKS!!!
• MUST: Cpu Setting's [13]
• 570GTX pid=1701923 mode=threaded start=

All working

Updated to 10.7.2: all working

• Intel Core 2 Duo E4400
• Chipset Nvidia Nforce 650i SLI
• JMicron® JMB363 PATA and SATA controller
• LAN Nvidia Lan
• Audio Realtek ALC883
• HIS AMD HD6670

- iAtkos L1 selecting:

• Chameleon 2.0
• VoodooHDA 2.6

add manually kexts for Nvidia ATA amp;amp;amp;amp; Nvidia LAN (see verdant post on insanelymac.com) into folder system of installation flash after installation add above kexts into system\library\extention and repair permission after load system by kext utility. All working!!! Updated to 10.7.2: all working

• Intel Core 2 Duo E8400
• Chipset Intel P35/ICH9R
• JMicron® JMB363 PATA and SATA controller
• LAN Marvell88E8056
• ASUS WiFi-AP Solo 54 Mbps IEEE 802.11g
• Audio ADI® AD1988B
• Point Of Wiew nVidia GeForce 8600GT 1024MB
• 1xInternal card reader and additional Usb ports

- iAtkos L1 selecting:

• Chameleon 2.0
• AHCI Intel
• Jmicron
• nVenabler
• VoodooHDA 2.7.2
• LAN Marvell
• WiFi RTL81xx

All working!!!

Updated to 10.7.2: all working

• Q6600
• ASUS 4670
• Audio ALC1200 works (use VoodooHDA_0.2.56.pkg.zip)
• Atheros AR8121/... works
• USB 2.0 Works OOB

• Easybeast (but don't use audio drivers, install separately)
• Chimera )

• Q6600
• ATI Radeon HD 4870
• USB 2.0 Works OOB

• Easybeast
• Chimera (PCIRootUID=0 -x on boot initially)
• ATI 48xx
• Ethernet

Install Method: Unibeast Based

• Intel E6400 CPU 2,13 GHz @ Overclocking 2,67 GHz
• ATI Radeon X1800XT (256MB DDR3 256Bit) works, high performance...
• Install Method: RETAIL Disk Image...

Components Status:

• Audio ALC882M Stereo L+R - Line-Out x3 24bit, Line-In x1 20bit, Integrated microphone x1 20bit, Headphones Integrated x1 24bit, S/PDIF out x1 32bit (+ Info System Profiler)
• Ethernet - Native Works (Marvell Yukon Gigabit)
• Wireless RTL8187 b/g - Works
• USB 2.0 - Native all Work
• USB 3.0 PCIe - Work SUPER SPEED
• IDE - Natine all Work
• E-SATA 3GB - Natine all Work
• Shutdown/Reboot/Stop - Work...
• 100% COMPATIBLE

• Kext mod. PIEROF81
• Audio Kext: [14]

• ATI HD4870 TOXIC (512MB) works with InJector+Patch
• Audio - works (bad)
• Ethernet - Works
• WiFi - Works likely AirportExtreme
• USB - All Works
• Shutdown/Reboot works

Installation method: xMove + MultiBeast

• Client update 10.7.2

Needed:

• OSX SnowLeopard installed yet
• Original Lion 10.7.0
• Client Update 10.7..2

After Install:

• Install Update * (DON'T RESTART!)
• In MultiBeast check EasyBeast - VoodooHDA 2.7.3 - Realtek Gigabit
• Restart

Patches'

• Kext and DSDT updated
• Repository code DSDT

• Intel Q9400 CPU 2.66 GHz @ 3.66 GHz
• 8400GS (256MB) works fully with GraphicsEnabler=y
• Install Method: Retail Disk Image boot with myHack, then Apple Software Update to 10.7.2

Components Status:

• Audio Out - ALC888; 3.5mm Headphones works, S-PDIF works, 5.1 surround 3.5mm outputs don't work (sub, r-left etc...).
• Audio In - ALC888; Line-in works, to use a unpowered mic you need a amp or sound card, this card works.
• Ethernet - Realtek, RTL8110SC; untested. Marvell, Yukon 88E8056; works, tested @ 100 Mbit/s.
• Wireless b/g - Works, but shows up as 'Ethernet' not 'AirPort'. (See patch column)
• USB - All Work
• SATA - All Work
• IDE - Untested
• E-SATA - Untested
• Shutdown/Reboot work 99% of the time.

• myHack (chameleon + other stuff)
• Built-in Realtek Wireless (RTL8187B)
• Add the italics text below to your boot.plist to stop an App Store verification error.

<key>EthernetBuiltIn</key>

<string>Yes</string>

Useful Tools

• OSX86Tools
• Kext Helper B7
• Guide

• Intel Pentium Dual-Core E5400 2.70 GHz
• WD Cavier Blue 500 GB SATA II Cache 16 MB (No AHCI)
• Keyboard: MDtech USB Keyboard
• GPU: inno3d GeForce 9500 GT 1 GB DDR2 (Used HDMI & DVI)
• BIOS : AMI 0502
• Monitors : Acer S202HL 1600x900 + PHILIPS 150E 1024x768
• PSW 500 W
• Ram Kingston DDR2 800 MHz 2x2 =4 GB

Notes

• Start with iATKOS L1
• No DSDT
• Delete unnecessary,unwant,panic kexts
• Delete unused LaunchDaemons and LaunchAgents
• Tweak all things that you can think of
• Tweak using MacPilot ,TinkerTool
• Update to Chameleon 2.1svn r1752 from Champlist
• org.chameleon.Boot.plist = UseKernelCache=Yes ,arch=x86_64 ,EthernelBuiltin=Yes ,USB Bus Fix ,VBIOS=Yes
• Mac OS X Lion 10.7.2 64 bit
• smbios.plist -- iMac 11,1 (found the best for pentium dual-core ;) )
• Boot time : Greatest : 19 seconds
• GeekBench max scores (64-bit) : 4154 ( NO Overclocking )

• VoodooHDA.kext (Latest) (Fix noise with Vectorize=Yes (Others boolean like this are Enabled) in info.plist in this kext)
• Fakesmc.kext
• NullCpuPowerManagement.kext
• Lnx2mac RTL81xx kext
• NvEnabler 64.kext with added graphics card id into info.plist

• Intel Q6600
• Chipset Intel G31
• Asus ENGT440
• Audio Works OB
• Realtek RTL8102EL (Driver from realtek.com.tw)

- iAtkos L2 selecting:

• Chameleon
• VoodooHDA 2.6.3
• Shutdown/Reboot work
• Graphics Enabler
• Netkas GF100 for Graphics

• Intel Core I5-2500 (not K)
• Chipset Intel Z68
• EVGA GTS 450 1 GB
• Samsung 830 SSD 128 GB

- iAtkos L2 selecting:

• Chameleon
• AHCI SATA and Trim
• VoodooHDA 2.7.2
• Hardware Sensors (CPU, MB, NVIDIA)
• GF100 (open GL patch)
• Intel Network Driver

Boots like magic! Sleep appears to work!!! You need to set your sound output in pref before speakers work.

• Intel Core 2 Quad Q8400 2.67 GHz @3.40
• Seagate Barracuda 500 GB SATA II Cache 32 MB (No AHCI)
• Keyboard: Apple USB Keyboard (Old G3)
• GPU: NVidia GeForce 9800 GT 1 GB GDDR3 256bits
• Dual Display

Install Method:

1. Bootcd HMBT LION DP4 with nvenabler or without nvenabler ([15])

2. BaseSystem with Packages on a external Driver or Pendrive

3. Install kexts on [16] (Portuguese)

4. Very very very Easy

5. Install Chameleon 2 RC5 r1020 HMBT LION and SNOW

6. Thanks for HMBT (Hackintosh Brasilian Team, the bests)

7. 9800T Graphics Enabler (Full, Dual Display, Full Acelaration)

• VoodooHDA.kext (0.5.6.2)
• Fakesmc.kext
• RTGMac_v2.0.6
• NvEnabler 64.kext
• If you need you can use the package developed by me for layout ABNT2 Layout ABNT2

• Intel Core2Duo E6420 CPU 2.13 GHz
• XFX GT240 512 mb DDR3 works fully

Notes

• BIOS: Store Configuration ATA/IDE Enhanced;Enhanced Mode Support:S-ATA; IDE Detect Time: 35
• Audio - works with VoodooHDA_261_HP_HDX18 (Output and Inputs) edit Info.plist, replace the key IOPCIClassMatch by IOPCIPrimaryMatch and put the PCI ID of your audio card in string. View: [17]
• Ethernet - Works from pack Atheros AR8121 AR8113AR 8114
• USB - All Work
• IDE - Work
• ICH9R - Works

Install Method:

• 1.BootCD: BOOTCD.ISO
• 2.iAtkos L1 from USB
• 3. Boot with the comand: npci=0x2000

• Bootloader: CHIMERA v.1.5.4
• MacOsxUpp Combo 10.7.2
• Shutdown/Reboot work 99.9% of the time.
• Mac App Store WORKS!!!
• iCloud WORKS!!!

Patches

• Bootloader: Chimera v.1.5.4
• Graphics Enabler
• Built-in Ethernet
• Extra/Extensions
• FakesMc
• Disabler
• EVO Reboot

'

• Sound+Ethernet: from download files

Useful Tools

• Ethernet voodoo kext kext utility multibest 403

• Intel i7-2600K CPU
• Keyboard: Logitech K800 WirelessUSB (Not fully supported)
• Mouse: Logitech MX Performance (Full supported with Logitech drivers)
• GPU: ATI HD6950 x2 (Crossfire does not work, obviously)
• BIOS Version: 1902

Component Status:

• Network: Works with Intel KEXT
• USB: OOB
• SATA: works
• Audio: Works using Mutibeast and DSDT.aml
• Restart/Shutdow: Works without issue

Install Method:

1. Used VMWare with a preinstalled image. Mounted my hard drive into VMWare and installed to physical drive.

• ALC8xxHDA.kext
• ApplHDA.kext rollback
• Fakesmc.kext
• AppleIntelCPUPowerManagement.kext (Patched with SpeedStepper)
• Intel E1000 NIC KEXT

• Intel i7-2600K CPU
• Keyboard: chicony ps2 and Delux USB (both fully supported)
• Mouse: Logitech MX 1000 (Full supported with Logitech drivers)
• GPU: nVidia GTX 460 (ASUS) 1gb
• BIOS Version: 0705

Component Status:

• Network: Works with Intel KEXT
• Realtek does not work
• USB: OOB
• SATA: works eSATA works
• Audio: works with Multibeast : ALC8xxHDA , AppleHDA Rollback and Non-DSDT HDAEnabler ALC889 ^_^
• Restart/Shutdow: Works without issue
• Sleep: Works

Install Method:

1. Clean GM Install, then update. Dual booting with windows 7 UEFI installation without issue! Bootloader latest Chameleon with GraphicsEnabler=Yes and npci=0x2000. (on external thumb drive couse of the efi boot) Sorry for my BAD english

• Fakesmc.kext
• AppleIntelCPUPowerManagement.kext (Patched with SpeedStepper)
• AppleIntelE1000e.kext
• VoodooPS2Controller.kext (for ps2)
• JMicron36xeSATA.kext (eSATA)
• Smbios: iMac12.2 (for speedstep to work)
• Speedstep WORKS

• CPU: Intel Core i3
• GPU: Nvidia 9500GT 1GB(Out of Box)
• Dual Monitors using VGA and DVI from Single Video Card

Component Status:

• All works

After using Mac App Store 10.7.1 I was able to use the 10.7.2 ComboUpdate. I've had no issues and I did not need to reapply any patches.

• Chimera (from MultiBeast) + arch=x86_64

VoodooHDA from Multibeast. Edit .plist for Voodoo to reduce gain at boot. This patch was done at initial 10.7.1 install.

• Intel i7-2600K CPU
• Keyboard: Razer Anasi (not fully working)
• Mouse: Razer Naga (full support with drivers)
• GPU: ATI HD6950
• BIOS Version: 1902

Component Status:

• Network: Works with multibeast
• USB: OOB
• SATA: works
• Audio: Works using Mutibeast
• Restart/Shutdow: Works without issue

Install Method: 1. Used Lion 10.7 GM USB Hack (google it) 2. Copied DMG to Snow Leopard mounted restored to flash drive 3. booted off flash drive and installed 4. boot into snow leopard ran extra lion to install on drive that had lion 5. downloaded Fake SMC put on lion drive 6. used multi beast for lion and installed cpu powermanagment to lion drive 7. boot into lion run multi beast for audio and network reboot 8. ran updates from software update

• Fakesmc.kext (from web)
• Multibeast for AppleIntelCPUPowerManagement.kext, Audio Voodoo 2.7.3, network
• Extra lion

• Intel Core 2Duo E8200 2.66 GHz
• GPU: ZOTAC 320 mb 8800GTS
• BIOS : Modified 1203 BIOS with AHCI support

Notes

• Update BIOS with this: [18]
• BIOS thread: [19]
• Chimera bootloader

• AttansicL1.kext
• Other kexts from iAtkos L1

• Intel I7 2600k
• GPU: Nvidia GTX 570
• Monitors : BenQ
• BIOS : 2001

Notes For more kexts I found some when unpacked the P8P67 Pro Install Package (the motherboards are basically the same, google the file name). Be careful installing this over iAtkos though, a boot loader failure may happen. Like I said, instead just unpack the installer and install the kexts needed (some for ATI-graphics for example).

Files needed found here

Installed with iAtkos L2

Options in installer: - Just the basics - USB 2.0/3.0 - Graphics enabler - Wifi if you got it etc

Additional kexts after install (Installed using Kext Wizard) - Sound: AppleHDA and ALC892HDA51B

- Graphics: Nvdia GTX 570 Installed ATY_Init first with Kext Wizard, then ran GTX Enabler from netkas. Only choose option 1 (I have heard that it is better to install ATY_Init seperately) Also installed the Cuda driver after that.

You may have to repair permissions and rebuild cache if your system fails to boot up again after this. Do this with Kext Wizard.

• Ionetworkingfamily.kext modified by me :)
• AppleNforceAta.slash.kext since I have over 3gb of ram
• JmicronATA.kext (When I replaced this existing kext it helped my raid become more stable)

Files in Extra

• Com.apple.boot.plist
• DSDT.aml upper case for chameleon to read it needs to be modified so you do not lose your bios settings. [20] I used dsdtse to extract, DO NOT USE THE INSTALL DSDT OPTION YOU WILL WRECK YOUR OS!
• smbios.plist

Files in E/E

• Openhaltrestart.kext
• Disabler.kext
• Fakesmc.kext
• Platformuuid.kext

My org.chamelon.Boot.plist

• <key>EthernetBuiltIn</key>
• <string>Yes</string>
• <key>GraphicsEnabler</key>
• <string>Yes</string>
• <key>Kernel</key>
• <string>mach_kernel</string>
• <key>Kernel Flags</key>
• <string>arch=i386 maxmem=3456 npci=0x2000 darkwake=0</string>
• <key>Legacy Logo</key>
• <string>Yes</string>
• <key>Timeout</key>
• <string>2</string>

• Bios revision 0901 you can save your bios setting under tools in your bios :) 32 bit Q6600 CPU @ 2.4 Ghz overclocked in bios to q6800 6gb ram 2 1gig 2 2gig all by ocz
• Video after snow leopard 10432 which is 10.6.0 is installed use the combo update by apple 10.6.8v1.1 Do not use software update causes issues
• Sound=Voodoohda.kext works no digital audio yet..airfoil is what I used to get audio to stream to airport express for the time being. Also if using vlc delay audio to -2050. Want to turn your hack into a airplay speaker? [21] autostart? [22] edit org.mafipulation.shairport.plist to change the airplay name before you load into launchctl
• Video=Nvidia Gtx280 works hdmi full 1080p no audio via hdmi yet
• Ethernet=Both On board nic's work. Used Netkas support files installed ionetworkingfamily.kext in S/L/E then showed the packages contents and deleted nvenet.kext in plugins then put NforceLan.0.64.5.kext (This improved the stability of the machine immensely and torrent downloads now seem stable!)
• Ide works OOB
• Sata works
• Usb works
• Esata rocketraid 2302 port1 running a Raid10 enclosure w (4) 1TB 7200 rpm drives, port 2 using a Single HD dock with (1) 500GB 7200rpm both drives work simultaneously Enable plug and play OS in bios use maxmem=3072 as a boot flag if using 4gb of ram or more still useable if you want e-sata support. AppleNforceATA.slash.kext needs to be updated for raid support see this link [23]

• Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz
• Chipset Intel G31/G33/G35
• Lan Marvell Youkon 88E8056 PCI-E Gigabit Ethernet Controller
• Audio ALC 883

Install Method:

• iAtkos L2 DVD Downloaded from here: [24]
• Install on Guid Partition Table, MBR Not Worked.
• Customize Part: Chameleon 2.1,Graphic Enabler,Non AHCI SATA,JMicron JMB36X IDE,Voodoo HDA 2.2
• Network: Marvell Youkon 88E8056 kext.

• Intel® Core™2 Duo Processor E4600

(2M Cache, 2.40 GHz, 800 MHz FSB)

• Chipset Intel® 945G + ICH7
• LAN Attansic L1
• Audio Realtek ALC883

• Update from a fubar Snow Leopard 10.6.8
• unplugged all unnecessary hardware
• Retail Install Lion App
• Mod to install on MBR
• Instructions to prepare the installation image and additional kexts here used a SATA drive instead of a USB pen drive.
• Boot with rBoot from tonymacx86
• Installation (went smoothly)
• Reboot with rBoot
• Downloaded 10.7.2 and updated no snags
• MultiBeast 4.1.0: Lion Edition before reboot.
• AttansicL1Ethernet.kext
• Audio kind of working with VoodooHDA.kext (only speakers)
• Sleep not working.

• Intel Core 2 Duo 3Ghz
• 2 x 2GB Kingston 800Hz DDR2 RAM
• Asus Nvidia GTS 250 512Mb
• SoundBlaster Audigy 2

• Note: I Used MultiBeast 4.1.0 for the following operations.
• Fix Ps2 Keyboard Issue:

- From MultiBeast: in Drivers.../Kexts.../Miscellanous, check PS/2 Keyboard/Mouse...

- Open Terminal from install drive (or flash drive install disk)

- Enter: vi Volumes/OSX/System/Library/CoreServices/Setup\ Assistant.app/Contents/Info.plist

- Delete these lines:

<string>DeviceSection</string>

<string>KeyboardTypeSection</string>

• Sound Blaster Audigy 2

- Install kXAudioDriver-1.11b0 drivers

• OnBoard audio

- Install VoodooHDA 2.6.3

• Ethernet (Marvell Yukon 88E8056 PCI-E Gibgabit Ethernet)

- Install IONetworkingFamily.kext (Drag &amp; Drop over kext utility)

- Go in System Preferences/Network; then click ok on warning; then click Apply

• VideoCard:

- Open MultiBeast in Customization/Boot Options, check: 32-bit Apple Boot Screen and PCI Root ID Fix

- Find and open com.apple.boot.plist, then add/replace the following lines:

<key>Graphics Mode</key>

<string>1920x1200x32</string>

<key>GraphicsEnabler</key>

<string>Yes</string>

<key>Kernel</key>

<string>mach_kernel</string>

<key>Kernel Flags</key>

<string>-v</string>

• Bootloader

- Install Chimera 1.6.0 (not the one from MultiBeast)

• Intel i7-2600K CPU
• Keyboard: Lenovo Thinkpad USB travel keyboard with trackpad and mouse stick & Apple wireless Bluetooth keyboard
• Mouse: Logitech G9 game mouse
• GPU: ATI HD6870
• BIOS Version: 2105

Component Status:

• Network: works without issue with Unibeast, but check hnak's AppleIntelE1000e Ethernet driver in Multibeast, else it will be de-installed
• USB2: works without issue
• USB3: works without issue with Multibeast (step 5)
• Bluetooth: works without issue
• SATA 3GB & 6GB (Intel-ports): works without issue
• Audio: works without issue with Multibeast (step 5)
• Restart/Shutdow: Works without any issue

Install Method: Video

1. Format USB key (min. 8GB) with disk utility (use the option Master Boot Record)

2. Put you OSX Lion image in your OSX app folder

3. Run Unibeast (download from [25]) and install it on the USB key

4. Boot from USB and choose install OSX on your disk (format with disk utility the boot disk as Mac OSX extended journaled with option GUID partition table)

5. Run Multibeast (download from [26]) with the following items checked:

- easybeast install

- system utilities => repair permissions

- audio: - Realtek ACL8xxHDA - AppleHDA Rollback - Non-DSDT HDAEnabler - ALC889

- disk: - 3rdParty SATA - 3rdParty eSATA - Trim Enabler

- Miscellaneous: - FakeSMC - FakeSMC Plugins - Mohterboard plugins - AMD Radeon Plugin - USB 3.0 - NEC/Renesas and Etron

- Network: - hnak's AppleIntelE1000E Ethernet

- Bootloaders: - Chimera v1.7.0 r1394

- iMac 12,2

- OSx86 Software: - Kext Utility - ShowAllfiles

System Configuration:

• Intel i5 2400 Sandy Bridge
• XFX Radeon HD 6850

• BIOS version: rev 1
• Intel Core 2 Duo E4500 2.2GHz
• NVIDIA 6600 256MB DDR2
• Audio - Works
• Video - Works
• Ethernet - no test ( yukon marvell )built in
• Ethernet - test( realtek 81039c ) pci card
• Sleep/Wakeup - Works
• Shutdown/restart - Works
• Mac App Store - Works
• iCloud - no test

• Audio - select all voodoHDA
• ethernet - install realtek pkg for chipset 8139c

• Intel Pentium E5200 2.5GHZ OC 3.1GHZ
• ATI Shappire Radeon HD 5570 1GB DDR3
• Use SATA DVD-RW - IDE DVD-RW won't work (you will get "still waiting for root device" while booting the installer)

Components Status:

• Mouse - Only works USB Mouse - PS/2 doesn't work (by the moment)
• Keyboard - Works USB and PS/2
• Audio - Works VoodooHDA.kext (ver. 0.2.7.3)
• Video - Works (disabled graphics enabler - selected Atixxx_init)
• Ethernet - seems to work ( Realtek RTL8201CL ) built in
• Wireless - Works (D-Link DWA-110 - RT73 chip) - (RT73 Kext + Ralink Wireless Utility: [27])
• Sleep/Wakeup - ?
• Shutdown/restart - Works
• Mac App Store - Works
• iCloud - no test

System Configuration:

• BIOS version: rev 83
• Intel Xeon 5620 2.4GHz
• NVIDIA GTX560 1024MB DDR5 Zogis
• 12GB RAM DDR3 1333Mhz (show as 1066)

Notes:

• Install method - Lion.dmg iAtkos L2 10.7.2
• everything as default just select *IOPCIFamily, AHCI SATA Intel, Jmicron IDE, ALC8xx, ALC892, USB 3.0, Realtek RTL8111/8168
• Video with 5XXX package from kexts.com follow the instructions editing plist and thats all.

Components Status:

• Audio - Works
• Video - Works HDMI Works no audio from hdmi
• Ethernet - Works
• Sleep/Wakeup - does not work and altered bios (does not work in windows 7 either)
• Shutdown/restart - Works
• Mac App Store - Works
• iCloud - no test

System Configuration:

• Intel Core i7 920 D0 @ 4.0GHz
• PNY XLR8 GTX560 Ti OC 1024MB DDR3
• 6GB RAM DDR3 1600Mhz

Install notes:

• Install method - iAtkos L2 10.7.2

Keep defaults for everything plus:

• Bootloader options: PCI Root-1
• Patches: IOPCIFamily
• Drivers: AHCI SATA Intel, Jmicron IDE, Realtek RTL8111/8168, NVIDIA GF100
• Additional bootflags: -cpus=1 -npci=0x2000

Post-install:

• Drivers: Video with GTX 5xx driver from kexts.com, Audio with Multibeast 4.2.1 (ALC8xx Enabler, AppleHDA Rollback, ALC889), USB WiFi with Realtek 8188SU driver from their website.

Components Status:

• Audio - Works
• Video - Works HDMI Works no audio from hdmi
• Ethernet - Works
• USB Wifi -- Works using Realtek's 8188SU OS X 10.7.x driver
• Sleep/Wakeup - Works
• Shutdown/restart - Works
• Mac App Store - Works
• iCloud - no test

System Configuration:

• BIOS version: 6B3F1P43
• Intel Core 2 Duo E4500 2.2GHz
• NVIDIA GTX275 896MB DDR3
• 4GB RAM DDR2 1066Mhz

Notes:

• Install method - Lion.dmg restored and installed from 8GB thumb drive
• Bootloader: Chameleon 2.1 r1666
• Update to 10.7.2 by using Software Update

Components Status:

• Audio - Works
• Video - Works
• Ethernet - Works OoB
• Sleep/Wakeup - Works
• Shutdown/restart - Works
• Mac App Store - Works
• iCloud - Works

• CMOS reset patch
• Audio - patched AppleHDA
• Video - using DSDT patch
• [28] Foxconn P35A tools pack - all-in-one post-installation tool pack designed specifically for this motherboard

Install Method:

• xMove + Multi-Beast

Notes:

• Bootloader: Chimera 1.6
• Update: 10.7.2 Combo Update
• Video: Intel GMA 4500, no QE/CI only native

• Multi Beast:

• Easybeast
• System Utilities
• Lnx2Mac
• Kextbeast

• Audio: Realtek ALC888

• 10.7.2 Combo Update
• CPU: Intel Core 2 Quad Q6600 @ 2.4GHz
• Graphics: Palit GeForce 8600GT 1GB
• RAM: 4GB DDR2 @ 800MHz
• Audio: Realtek ALC888
• LAN: Realtek RTL8111B

• Shutdown/Restart: DSDT
• Graphics: GraphicsEnabler=Yes
• Audio: AppleHDA.kext (Rollback 10.6.2), ALC8xxHDA.kext, DSDT (HDEF)
• LAN: Realtek RTL81xx.kext
• Mac App Store: EthernetBuiltIn=Yes

• iAtkos L2
• CPU: Intel Duel Core E2200 @ 2.2GHz(Ditected as Core 2 Duo)
• Inbuilt (Ditected as 64MB)
• RAM: 2GB DDR2 @ 667MHz
• Audio: Not Working(didn't try)
• LAN: Not working(didn't try)
• HUAWEI E153 Modem working

• Shutdown/Restart/sleep/wake:working natively
• Graphics: GraphicsEnabler=No
• ps2 driver,usb driver,Disk drivers:yes
• Cpu Maxval Disabled
• Floppy disabled
• IDE 40GB HDD
• boot with dvd, when unplug the ps2 mouse installer not loaded (first plug ps2 mouse and KB and boot with -v after 15min installer loaded then plug the usb mouse and install 15min install time and everything worked without any trouble).

• Intel Core i5 750 CPUs
• nVidia GTX 260

Notes:

• Install Method: Install App from AppStore and [29]
• 10.7.2 installed after first boot
• MultiBeast installed after combo update

MultiBeast 4.1.0

• EasyBeast install
• Drivers & Bootloaders
  • Kext & Enablers
    • Disk
      • IOAHCIBlockStorageInjector
      • JMicron 36x ATA
    • Graphics
      • NVIDIA GF100 Fermi Patches
        • OpenCL Enabler 10.7.2
    • Miscellaneous
      • Nearly everything except USB3 and PS/2. Select PS/2 if needed.
    • Network
      • Lnx2Mac's RealtekRTL81xx..
  • Bootloaders
    • Chimera...
• Customization
  • Boot Options
    • 64-bit Apple Boot Screen
    • PCI Root ID Fix
    • Use KernelCache

Note: Needed to add ncpi=0x2000 to Kernel Flags (/Extra/org.chameleon.Boot.plist) after installing the ComboUpdate. Don't know if it is also used on 10.7.0 and was set by the UniBeast bootloader by default. The install worked without adding any kernel flag. Audio does not work out of the box and not with Drivers & Bootloaders/Kext & Enablers/Audio/Realtek ALC8xx/Non-DSDT HDAEnabler/ALC887-888b. Since I'm using an usb interface, I did ? the others. Someone might add an info to this entry.

• BIOS: F15
• CPU: Intel Core i5 760
• GPU: Gigabyte GeForce GTX 460 1Go
• RAM: 2GB x 4 DDR3 G-Skill (F3-12800CL9D-4GBNQ)
• HDD: 128GB SSD Kingston Hyper-X
• Bluetooth: Belkin Bluetooth USB Adapter 100 meter range
• Keyboard: Apple Wireless Keyboard MC184F
• Mouse: Apple Magic Mouse

Notes:

• Install only with 2GB x 2 RAM and USB mouse
• Works with this guide : UniBeast: Install Mac OS X Lion Using an All-In-One Bootable USB Drive
• Combo update 10.7.2 installed after first boot
• MultiBeast installed after combo update

MultiBeast 4.2.1

• User DSDT install Tonymacx86 DSDT Database
• Drivers & Bootloaders
  • Kext & Enablers
    • Miscellaneous
      • USB3.0 - NEC/Renesas and Etron
    • Network
      • Lnx2Mac's RealtekRTL81xx Ethernet v0.0.90

After install edit org.chameleon.Boot.plist in Extra folder and delete:

• GraphicsEnabler=Yes

Replace:

• npci=0x2000 and darkwake=0 by PCIRootUID=0

• Intel Core i5 2500k
• nVidia GeForce 210 (Works OOB)
• 4GB DDR3 RAM
• 1TB WD HDD SATA II

Notes:

• Installed Lion 10.7.2 (App Store + USB Method) with Tonymac's guide Unibeast: Tonymacx86Multibeast
• Sleep doesn't work. It sleeps but does not wakes up.
• Some problem with firewire while wake up from sleep mode.

• All drivers from Multibeast
• DSDT from the Tonymacx86 DSDT Database

• Intel Core i7 2600k
• nVidia GeForce 8500GS with dual display. Dual Display is working.
• 4GB DDR3 RAM
• 1.5 TB SEAGATE HDD SATA II two partion HSF+ and exfat. Boot partition is Mac Journaled and Guid partition

Notes:

• Installed Lion 10.7.2 via Kakewalk Method. Ethernet driver is added Tonymac's Multibeast. Sounds is working. I use coaxıal digital output.
• Sleep doesn't work. It sleeps but does not wakes up.

• All drivers from Kakewalk and Multibeast. (ethernet driver only)

• Intel Core2Duo

Notes:

• Chameleon RC5 Trunk 1730
• Retail install from 10.7.2 USB install. Everything works perfectly: Speedstep, Ethernet, Sleep, Audio, Graphics

• FakeSMC (IntelCPUMonitor, IntelThermal, SuperIOFamily)
• AppleHDA [30]
• ElliottForceLegacyRTC

THE DSDT, org.cham.boot, smbios [31]

• Intel Core I7 1336
• ATI Sapphire 5770

Notes:

• Works with this guide : Install Lion retail on your PC
• Legally installing of Lion 10.7.2
• One of the best supported motherboards

• Binpatched ALC889 AppleHDA
• Graphics work out of the box
• Chameleon r1600
• Patched NEC driver for USB 3 support (PXHCD.kext)
• Download of Content:Hackintosh.nl X5A-UD7 support download

• Intel Core I7 1336
• ATI Radeon HD 5770 XFX

Notes:

• Works with this guide : Install Guide OSx86 Hackintosh Lion 10.7 Gigabyte X58A-UD3R
• Legally installing of Lion 10.7.2
• One of the best supported motherboards

• Binpatched ALC889 AppleHDA

• Kernel: vanilla
• Sound: Realtek ALC889A
• Ethernet: RTL8111B
• USB, Firewire - works OOB
• Shutdown/Reboot - works OOB
• Sleep: works with SleepEnabler kext

• Sound: VoodooHDA [32]
• Ethernet: Lnx2Mac's RTL81xx Driver [33]
• DSDT patching (minor)

• Intel Core 2 Quad Q9550 @ 2.83 GHz
• EVGA GTX 460 1 GB SC GDDR5 1 GB PCI-e Graphics Card
• On-Board Gigabit Ethernet
• DWA-556 Xtreme N Wireless PCI-e Card
• IOGear USB 2.0 Bluetooth 2.1 Adapter
• HP Webcam 3100

• Install Guide Here : Install Guide
• For all working specs, please visit My Blog

• Intel Core 2 Quad Q9550 @ 2.83 GHz
• EVGA GTX 460 1 GB SC GDDR5 1 GB PCI-e Graphics Card
• On-Board Gigabit Ethernet
• DWA-556 Xtreme N Wireless PCI-e Card
• IOGear USB 2.0 Bluetooth 2.1 Adapter
• HP Webcam 3100

• OS X 10.7 Lion GM (MaLd0n's USB Install Guide) + Upgrade to 10.7.1 +10.7.2
• DSDT Auto-Patcher, Multibeast (UserDSDT), Lnx2Mac RTL Kext, Gigabyte ALC8xx, Reinstall AppleHDA10.6.2.pkg, GraphicsEnabler=Yes, npci=0x2000
• For all working specs, please visit My Blog

• Intel Core 2 Duo E7500 @ 2.93 GHz
• NVIDIA 7300GT 512 GB DDR2 PCI-e Graphics Card
• 1xCorsair 2 GB DDR2 800 MHz
• On-Board Gigabit Ethernet
• On-Board Realtek Audio (ALC8xx)

• OS X 10.7.2 Lion iAtkos L2 (UPHUCK Install Guide)
• Lnx2Mac RTL Kext, Gigabyte ALC8xx, GraphicsEnabler=Yes, For 7300GT install drivers from Multibeast 4.2.1 for lion(EasyBeast metod)
• For easy install, no need set drivers

• on-board mod bios F10b based
• Intel Core 2 Quad Q9550 @ 2.83 GHz
• PNY-Nvidia Quadro FX 4600 768mb
• on-board ALC889a
• 2X Ethernet Realtek 8111C (only 1 works)
• on-board 2x Firewire ports (OOTB)
• USB (OOTB)
• Audio card : MOTU 828 MK3 Firewire (drivers Motu)

Note:

• Install method: IatkosL1 + soft.updt
• using unmod bios you must use a proper dsdt, sleep, reboot, c-state patches
• Quadro : OOTB with graphics enabler, you can use also last quadro + cuda drivers

• Chimera
• Graphics Enabler
• Fakesmc + plugins
• intel mainboards sensors
• Smbios MP3,1
• Intel sata kext
• Jmicron SATA/IDE (?)
• Lan Realtek 81xxx
• Audio ALC885_889a (replace in S/L/E after each updt)

• Intel Core i7 2600k
• MSI GTX 560 TI Twin Frozr ll

Notes:

• Installed with Tonymac's guide: Tonymacx86

• All drivers from Multibeast
• For full QE/CI: added dev id to NVDAGF100HAL.kext, installed ATY_init.kext, set GraphicsEnabler to yes, npci=0x2000, followed this guide
• DSDT from the Tonymacx86 DSDT Database

• Intel Core i7 2600k
• Gigabyte GTX 560
• Bluray Burner Lg HL-DT-ST BD-RE BH08LS20

Notes:

• Installed with Tonymac's guide Unibeast: Tonymacx86Multibeast
• Sleeping doesn't work well.
• Some problem with firewire while wake up from sleep mode.

• All drivers from Multibeast
• For full QE/CI: added dev id to NVDAGF100HAL.kext, installed ATY_init.kext, followed this guide
• DSDT from the Tonymacx86 DSDT Database
• Info set up Boot Raid0 on Lion: it was a bit tricky but I mix-match this two guide Raid 0 Guide (but I didn't downloaded it's files, just used bootloder in Tonymac's multibeast installarer; it's perfectly ok. Then I followed this guide Raid 0 Guide 2 (just followed the command parts no efi reset)

• CPU Intel 2.8 GHz Intel Core 2 Duo
• NVidia GeForce GTS 450 1024 MB
• Install Method: Kakewalk (with fresh installation):
• Installed with laikexpert Guide:[34]
• Installed with laikexpert Guide:[35]
• Updated with 10.7.2 Combo Update

• All works except Sleep Mode

• Install method IAtkos L1 DVD
• CPU: quad core q9550
• Graphics: NVIDIA 8400gs 256MB Fully recognized with QE/CI working
• Sound works with alc8xx.kext and hdae888.kext
• Sleep Mode not working
• Updated to 10.7.2 via online Software Update

• used tutorial [36]

• CPU: Intel i7-2600k @ 3.4 GHz
• Chipset: Intel Z68
• BIOS: F10
• Graphics: Zotac GTX 465 1GB GDDR5 (patches from Multibeast,Graphics Enabler=Yes npci=0x2000)
• Audio: Realtek ALC889, Used ALC8xx Enabler and AppleHDA.kext rollback from 10.6.2
• LAN: Realtek RTL8111E, Used RTL8111E/RTL8168 from MultiBeast.
• Shutdown and reboot work perfectly
• Used custom DSDT from tonymacx86

- Retail (Used UniBeast to make bootable installer from 10.7.0 DMG)

• Installed 10.7.0 then used Combo update to 10.7.2
• Installed MultiBeast for Lion with custom DSDT from tonymacx86
• Selected 10.7.2 GF100 CL Driver for Graphics from MultiBeast
• Installed ALC8xx Enabler and AppleHDA.kext from 10.6.2 using MultiBeast
• After reboot, went to audio settings to select Line Out
• Everything works perfectly, Note: if you try VoodooHDA, it will kernel panic on boot
• Notes: Make sure to enable HEPT 64 bit and AHCI in BIOS

• Install method IAtkos L2 DVD or Retail Dvd
• CPU: I7 2600
• Graphics: Onboard HD 3000 Fully recognized with QE/CI working
• Sound works with hdmi audio applehda.kext [37]
• Sleep Mode doesn't work yet haven't tried to fix it
• sata works
• RocketRaid 2302 Raid 10 port multiplier works (4) 1 tb 3.0 gb's 7200 rpm drives

• While running iatkos L2 or Snow leopard
• How to create a Lion recovery installer partition at least with my setup this assumes you have snow leopard or lion already installed if not talk to google this will probably work on other boards or USB sticks as well:

• 1. Format a partition to 6gb or more mac os extended (journaled)
• 2. Erase that partition if there is any old data it will not work
• 3. Use xmove to install your 10.7.0 lion app to your partition if it fails mount installESD.dmg and yes it may say a ridiculous time (30min or more) just be patient it will install eventually the timer lies
• 4. While using lion or snow leopard use multi beast lion edition to install mac pro 3,1 smbios and user dsdt with your DSDT.aml on your desktop I also installed some other options in multi beast such as what gordo74 said on page 1 but not smbios 5,1 it will not work.
• 5. If you need MBR which I did since I multi boot patch your installer partition with nawcom's mbr patch
• 6. Reboot and I used these boot flags to get into the installer since I have a quad core cpus=1 -x you can add these to your org.chameleon.boot.plist kernel flags also to make it more seamless

• Install Lion on you mbr partition
• Once lion is installed and before you reboot install combo update 10.7.2 after that follow gordo74's guide to install multi beast lion edition now use smbios 5,1 mac mini as it states in gordo74's guide. IF YOU DONT FOLLOW THIS LAST STEP TO A T YOU WILL HAVE MAJOR ISSUES WITH YOUR INSTALL!
• [38]
• [39]
• The key to dsdt on this board is to use smbios for a mac mini

• nVidia® GTX460 - Dual Ready - Full Support
• (ZOTAC® GTX460 - 768MB)
• Intel® 82579V Gigabit Ethernet Controller
• Intel® High Definition Audio - Realtek ALC892
• USB 3.0 Renasas
• iBoot + Multibeast 4.1.0 (without DSDT.aml) if problems, use DSDT fixer

• ALC 8xx , ALC Rollback, ALC892 Enabler
• Fake SMC
• NullCPUPowerManagement
• hank's AppleIntelE1000e Ethernet
• USB 3.0 Renesas Patch
• For nVidia - edited AppleGraphicsPowerManagment.kext, edited NVDAGF100Hal.kext (added device id 0e22), Open Cl patched GeforceGl.bundle. to download all the kest and bundle, [40]
• use GraphicsEnabler=Yes for nVidia
• Some HDD move than &amp;amp;amp;amp;amp;gt;1TB isnt boot of 4kSector Problems, if it is, install Chameleon in EFI before reboot
• for kext request - iamdines at gmail . com

• MSI nVidia® 9600GT - Dual Ready - Full Support
• Realtech 81xx controller
• Intel® High Definition Audio - User Voodoo 2.6.1
• USB 2.0
• Used Iatkos L2 if problems, use DSDT fixer

Note: Sleep Not working, Icloud and Apple store issues present

• Realtech 81xx - for network
• Voodoo 2.6.1 for audio
• Fake SMC
• NullCPUPowerManagement
• User NV enabler - Yes
• use GraphicsEnabler=Yes for nVidia

• radeon hd4850 sapphire 512mb - ok dual display
• network intel 82579v
• realtek alc892
• usb 3.0 nec/renesas
• fw400 - native
• iBoot 3.1.1 with PCIRootUID=1 -x thanks to user raketa [41]
• installed with Multibeast 3.8.0 UserDSDT and Dsdt.aml from DSDT fixer

• DSDT.aml
• alc8xxhda, alchdaRoolBack and alc892 enabler non-dsdt
• ati hd48xx injector, ati hd48xx patch 10.6.8
• usb 3.0 nec/renesas patch
• hnak´s AppleIntele1000 Ethernet
• NullCPUPowerManagement.kext

• BIOS 5591
• XFX AMD HD6870 Black Edition 1024mb 4x Displays
• Onboard Intel Gigabit
• Creative X-Fi Fatal1ty PCI-e (Voodoo Audio 2.7.3)
• iATKOS 10.7.1 L1 + Software Update to 10.7.2
• installed with Multibeast 3.8.0 UserDSDT and Dsdt.aml from DSDT fixer

• DSDT.aml
• USB Fix
• Voodoo Audio 2.7.3
• hnak´s AppleIntele1000 Ethernet
• EvOReboot
• Intel SATA AHCI
• Chimera Bootloader
• System IDs as Late 2008 Mac Pro, Vanilla 64bit install, updates through Software update no issues. 1 Caveat to video, if using HD6870 w/ Active MiniDP to DVI adapters, at login you must unplug and replug them or screen is distorted. Then you log out and in again for wallpaper to display properly on all 4 monitors. After this everything is perfect. Researching solution.
• Cannot get Audio Input to work on Creative Fatal1ty X-Fi. Using cheap (&amp;amp;amp;amp;amp;lt;) USB sound card for microphone support. My onboard audio is dead, though it is supposedly compatible.

• Install Method: Retail Disk Image install on Hackintosh or Mac - Mac OS X 10.7 (11A511) - Chameleon 2.0 RC5 r1171
• GMA950 - Works Dual Display 1920*1200
• Ethernet - works
• 10.4 - 10.7 compatible based on development-platform motherboard
• Software update works from 10.7.0 - 10.7.1 - 10.7.2

Extra

• DSDT.aml
• org.chameleon.Boot.plist

S/L/E

• fakesmc.kext
• RealtekRTL81xx.kext
• IONetworkingFamily.kext

• BIOS: Latest from Intel
• EVGA GTS 450 FPB OOB (no audio over HDMI)
• Onboard Ethernet working OOB
• Sleep working OOB
• Retail 10.7.0, upgraded to 10.7.2 flawlessly
• Installed with Multibeast via Tonymacx86

• FULL GUIDE HERE: [42]
• User DSDT (found at link above)
• Chimera Bootloader
• System Definition: Mac Pro 3,1
• On-board Audio not supported, USB audio card purchased

• BIOS: Latest from Intel
• XFX Geforce GT 520 OOB
• RAM DDR2 800Mhz 4GB (PC2-6400)
• Onboard Ethernet working with Mutibeast 4.2.1
• Sleep ?
• Retail 10.7.0, upgraded to 10.7.2 using combo !!NOT FORM SOFTWARE UPDATE!!
• Installed with Multibeast 4.2.1 via Tonymacx86

• Chimera Bootloader
• On-board Audio works with VoodooHDA
• Select Intel82566MM.kext in MutiBeast for Ethernet

• Intel Core i5-750
• ASUS GeForce EN210 Silent 512MB
• Broadcom USB Bluetooth Adapter (0x016a, 0x050d) to connect my Magic Trackpad

Installation: I tried to upgrade my Snow Leopard Installation with tonymac86's guide but i failed.

The Installer-partition was not fully bootable until I copied my SL-/Extra onto it.

Afterwards Installation was possible and i did a fresh install.

• ALC8xxHDA + ALC889 HDAEnabler
• 3rdParty SATA + eSATA + JMicron36x (not sure if needed)
• ElliotForceLegacyRTC
• FakeSMC
• Lnx2Mac's RealtekRTL81xx
• Chimera v1.5.4 r1394
• Kernelflags: npci=0x2000 GraphicsEnabler=yes (for full QE/CI with Asus GeForce EN210 Silent)

Sleep:

• To fix the CMOS reset after sleep look here
• To fix reboot after wake make sure you tick the two boxes in energy preferences: automatic restart on power failure and automatic restart on freeze(!)
• BIOS: Suspend mode S3
• Also had to disable wake by USB, otherwise Magic Trackpad (or the bluetooth adapter) wakes the system after going to sleep (is there a fix?)

• Intel Core 2 Duo
• Gigabyte Radeon 5770HD 1024mb

Installation:

• Download drivers and DSTD from here: [43]
• Retail (Used UniBeast to make bootable installer from 10.7.0 DMG)
• Use my DSTD.aml, FakeSMC.kext, NullCPUPowerManagement.kext and whole boot folder to boot system.

• ALC Work & Headphones & Digital out
• 3rdParty SATA + IDE Via Controller works
• Full temps and cools monitor (CPUS, Pipes, Volts)
• FakeSMC
• Sleep (if sleep works on your windows (S3))
• App store
• iCloud

Sleep:

• To fix the CMOS reset after sleep look here

• Intel Dual Core G620 2.6 GHz, 3MB Cache (Sandy Bridge)
• ASUS GeForce GS8400 Silent 512MB

Installation: iATKOS L2

• AppleHDA
• Lnx2Mac's RealtekRTL81xx
• Chimera v1.5.4 r1394

Sleep: Everything works out of BOX

GraphicsEnabler=Yes

GraphicsEnabler=Yes Dual Monitor = Works, but I need to change my default monitor to the port DVI 2 and my VGA to DVI monitor to the port DVI 1. I install the drivers ATY_Init and ATI 48xx of the iATKOS L2 but dont have sure if that make the diference.

PCIRootUID=0

Thats it

installer here

Fixed resolution issues and enabled the potential of the card.

• <key>GraphicsEnabler</key>
• <string>Yes</string>