HCL 10.7.2

From OSx86
Revision as of 18:46, 8 December 2011 by Tom (Talk | contribs)

Jump to: navigation, search
macOS 10.7.2
Hardware Compatibility

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

  • ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
  • Please add hardware into tables.
  • This is for 10.7.2 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Contents

Motherboards

Abit

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
Yes Yes

Asrock

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
G31M-S R2.0 G31 Sleep does not work. Everything else works fine.

System Configuration:

  • Intel Core 2 Quad Q8400
  • 2 x 2GB 800MHz DDR2 RAM
  • Gainward GTX 460 OC 1024MB
  • 2x Western Digital 1TB HDD 7200rpm

onboard video card do not work!!!!!

MultiBeast settings: EasyBeast, System Utilities, VoodooHDA 0.2.1, Chimera 1.5; Tutorial here Tick.png Tick.png
H61M-VS Intel H61 Sleep, Onboard Audio and Integrated Graphics not tested. Everything else works fine.

System Configuration:

  • Pentium G620
  • 2 x 4GB 1333MHz DDR3 (Apacer 78.B1GDE.9LZ0C)
  • Nvidia 8800GT 512MB
  • Intel 320 40GB SSD
  • WD15EARS HDD
  • E-MU 0202 USB Audio Interface
MyHack 2.0 RC4.1, AtherosL1cEthernet.kext, AppleACPIPS2Nub.kext, ApplePS2Controller.kext Tick.png Tick.png
asrock-wolfdale 1333-d667 R2.0[1] ICH7 System Configuration:
  • Intel Core2Duo @ 1.86 GHz
  • 2x1GB 688MHz Ram
  • Install Method: iATKOS L1 10.7.1 after update whit combo update lion 10.7.2
  • Audio - VIA VT1708S Works!
  • Ethernet - RTL8111DL Works!
  • Intel® Grafics Media Accelerator 950 whit graphic enabler
  • USB - All Work
  • SATA - All Work use IOATAFamilyfix!
  • IDE - Work
  • E-SATA - Untested
  • Shutdown/Reboot work 100% of the time.
Patches
  • iATKOS L1 10.7.1 distro with special options VoodooHDA 2.0.1 and RTL81XX
  • DVD-ROM & HDD connected to SATA6G_M9128 PCI-Express SATA addon controller and installed flawlesly.
  • After installation download Multibeast and add the internet drivers for Official Realtek 2.0.6 driver for 81xx Ethernet controllers.
  • also if you have a ps/2 board use a numkey for laptop and you resolve the problem at the start that says before begin please connect a mouse that resolve that problem to resolve the problem whit icloud and app store just download the last version of chimera.
Tick.png Tick.png
P67 Pro3 SE Intel P67 Everything works fine.

System Configuration:

  • Intel Core i5 2500K
  • 1 x 4GB 1333MHz DDR3 RAM
  • Asus HD 6950 DirectCu 2 1024MB[2]
  • 1x Western Digital 500 GB HDD
  • MultiBeast settings: EasyBeast, System Utilities, ALC 8xx, Apple HDA Rollback, HDA Enabler
  • Atheros AR8151[3]
  • Latest Chameleon bootloader[4]
Tick.png Tick.png
P55 Pro/USB3 Intel P55 Slepp is not working, everything other works fine.

System Configuration:

  • Intel Core i5 655K
  • 2 x 2GB Corsair 1333MHz DDR3 RAM
  • Sapphire AMD HD6670 512MB - works out of the box
  • 2x Samsung 500GB SATA2
  • Audio works Realtek ALC892
  • Ethernet works - RTL8111E
  • Install method - iAtkos L1, after upgrade to 10.7.2
  • MultiBeast settings: Lnx2Mac, alc8xxhda, non dst -> alc892, voodoohda 0.22
Tick.png Tick.png

Asus

Hardware Name Chipset Notes Patches Used 32/64bit working with patches


Asus Maximus IV Gene-z Intel Z68 System configuration:
  • Intel Core I7 2600K
  • Chipset Intel Z68
  • 4 x 4GB Kingston 1333Hz DDR3 RAM
  • Palit 570GTX 1280MB
  • 27inch Dual Display
  • Raid0 2X 120GT OCZ SOLID3 Sata 6GT WORKS OB
  • Audio Works OB
  • Network Works OB
Installation method:

- iAtkos L2 selecting:

All working!!!

Updated to 10.7.2: all working

Tick.png Tick.png
Asus P5QL Pro Intel P43 System configuration:
  • CPU: Q8300 2.5GHz Intel Core 2 Quad
  • Chipset: Intel P43 & ICH10
  • BIOS: v1004
  • RAM: 8GB (4x2GB Kingston DDR3-1333)
  • Storage: 1TB Seagate 7200 RPM Sata 2 (Sata works no kext needed, turn on AHCI in BIOS)
  • Optical: Pioneer DVD-RW DL 22x Sata 2
  • Graphics: Zotac GTX 465 1GB GDDR5 (installed drivers from Multibeast,Graphics Enabler=Yes npci=0x2000)
  • Audio: Realtek ALC1200, Used ALC1200_1063 AppleHDA.kext (from tonymacx86)
  • LAN: Atheros 1LE, Used AttansicL1eEthernet.kext (from tonymacx86)
  • Shutdown and reboot work perfectly
Installation method:

- Retail (Used UniBeast to make bootable installer from 10.7.0 DMG)

  • Installed 10.7.0
  • Installed 10.7.2 Combo update from USB stick
  • Installed MultiBeast for Lion before rebooting
  • Selected 10.7.2 GF100 Driver for Graphics card from MultiBeast before reboot
  • Installed AttansicL1eEthernet.kext and AppleHDA.kext for ALC1200 using Kextbeast before reboot
  • After reboot, went to audio settings to select Line Out
  • Everything works perfectly if you use AppleHDA.kext for the ALC1200, if you try VoodooHDA, it will kernel panic on boot.
Tick.png Tick.png
Asus P8P67 Intel P67 System configuration:
  • Intel Core I5
  • Chipset Intel P67
  • 4 x 4GB Kingston 1333Hz DDR3 RAM
  • Asus Radeon 5770 1024MB
  • Audio No Works
  • Network Works with offical driver from realtek.com or MultiBeast
Installation method:

- Any iso from internet, mac lion + MultiBeast:

  • Driver & Bootloaders => Kexts & Enablers => Realtek ALC8xx => ALC8xxHDA
  • Driver & Bootloaders => Kexts & Enablers => Realtek ALC8xx => AppleHDA Rollback
  • Driver & Bootloaders => Kexts & Enablers => Realtek ALC8xx => Non-DSDT HDAEnabler => ALC892
  • Driver & Bootloaders => Kexts & Enablers => Network => Lnx2Mac's RealtekRTL81xx Ethernet
  • Driver & Bootloaders => Kexts & Enablers => Miscelleneous => FakeSMC
  • Driver & Bootloaders => Kexts & Enablers => Miscelleneous => FakeSMC Plugins => Motherboard Plugins
  • Driver & Bootloaders => Kexts & Enablers => Miscelleneous => FakeSMC Plugins => Nvidia Plugin
  • Driver & Bootloaders => Kexts & Enablers => Miscelleneous => NullCPUPowerManagement

USB3 and build GPU not work for me.

Updated to 10.7.2: all working

Tick.png Tick.png
Asus Maximus IV Gene-z Intel Z68 System configuration:
  • Intel Core I7 2600K
  • Chipset Intel Z68
  • 4 x 4GB Kingston 1333Hz DDR3 RAM
  • Palit 570GTX 1280MB
  • 27inch Dual Display
  • Raid0 2X 120GT OCZ SOLID3 Sata 6GT WORKS OB
  • Audio Works OB
  • Network Works OB
Installation method:

- iAtkos L2 selecting:

All working!!!

Updated to 10.7.2: all working

Tick.png Tick.png
P5N-E SLI Nvidia Nforce 650i SLI System configuration:
  • Intel Core 2 Duo E4400
  • Chipset Nvidia Nforce 650i SLI
  • JMicron® JMB363 PATA and SATA controller
  • LAN Nvidia Lan
  • Audio Realtek ALC883
  • 2 x 2GB Kingston 800MHz DDR2 RAM
  • HIS AMD HD6670
  • 2xHD ide (Snow iAtkos 10.6.6, iAtkos L1 updated 10.7.2)
  • 1xHD sata (Windows 7)
  • 1xDVD RW ide
Installation method:

- iAtkos L1 selecting:

  • Chameleon 2.0
  • VoodooHDA 2.6

add manually kexts for Nvidia ATA & Nvidia LAN (see verdant post on insanelymac.com) into folder system of installation flash after installation add above kexts into system\library\extention and repair permission after load system by kext utility. All working!!! Updated to 10.7.2: all working

Tick.png Tick.png
P5K-E/WiFi AP Solo Intel P35/ICH9R System configuration:
  • Intel Core 2 Duo E8400
  • Chipset Intel P35/ICH9R
  • JMicron® JMB363 PATA and SATA controller
  • LAN Marvell88E8056
  • ASUS WiFi-AP Solo 54 Mbps IEEE 802.11g
  • Audio ADI® AD1988B
  • 2 x 2GB Kingston 800MHz DDR2 RAM
  • Point Of Wiew nVidia GeForce 8600GT 1024MB
  • 5xHD Sata (Xp, 7, iDeneb 10.5.6, Snow Hazard 10.6.2, iAtkos L1 updated 10.7.2)
  • 1xHD Ide (Ubuntu 11.04)
  • 1xDVD RW DL Lightscribe
  • 1xInternal card reader and additional Usb ports
Installation method:

- iAtkos L1 selecting:

  • Chameleon 2.0
  • AHCI Intel
  • Jmicron
  • nVenabler
  • VoodooHDA 2.7.2
  • LAN Marvell
  • WiFi RTL81xx

All working!!!

Updated to 10.7.2: all working

Tick.png Tick.png
P5QL-E P43 Configuration
  • Q6600
  • ASUS 4670
  • 4GB (4x1) 800 Mhz Kingston
  • Audio ALC1200 works (use VoodooHDA_0.2.56.pkg.zip)
  • Atheros AR8121/... works
  • USB 2.0 Works OOB
  • 60GB OCZ SSD
  • 1TB Samsung HDD
Patches
  • Easybeast (but don't use audio drivers, install separately)
  • Chimera )
Tick.png Tick.png
P5QL-EM P43 Configuration
  • Q6600
  • ATI Radeon HD 4870
  • 4GB (2x2) 800 Mhz Corsair
  • USB 2.0 Works OOB
  • 1TB WD HDD
Patches
  • Easybeast
  • Chimera (PCIRootUID=0 -x on boot initially)
  • ATI 48xx
  • Ethernet

Install Method: Unibeast Based

Tick.png Tick.png
P5W DH Deluxe WIFI Intel 975X Intel ICH7R System Configuration:
  • Intel E6400 CPU 2,13 GHz @ Overclocking 2,67 GHz
  • ATI Radeon X1800XT (256MB DDR3 256Bit) works, high performance...
  • DDR2 4GB (4x1) 834 MHz (OCZ Platinum Rev.2)
  • Install Method: RETAIL Disk Image...

Components Status:

  • Audio ALC882M Stereo L+R - Line-Out x3 24bit, Line-In x1 20bit, Integrated microphone x1 20bit, Headphones Integrated x1 24bit, S/PDIF out x1 32bit (+ Info System Profiler)
  • Ethernet - Native Works (Marvell Yukon Gigabit)
  • Wireless RTL8187 b/g - Works
  • USB 2.0 - Native all Work
  • USB 3.0 PCIe - Work SUPER SPEED
  • IDE - Natine all Work
  • E-SATA 3GB - Natine all Work
  • Shutdown/Reboot/Stop - Work...
  • 100% COMPATIBLE
Patches
  • Kext mod. PIEROF81 
THINK DIFFERENT HACKINTOSH
Tick.png Tick.png
P5E3 Premium/Wifi-AP Intel X48 - ICH9R SATA Intel Q9550 CPU 2.82 GHz @ 3.4 GHz
  • ATI HD4870 TOXIC (512MB) works with InJector+Patch
  • 4x2GB 1600 MHz Ram
  • Audio - works (bad)
  • Ethernet - Works
  • WiFi - Works likely AirportExtreme
  • USB - All Works
  • Shutdown/Reboot works

Installation method: xMove + MultiBeast

  • Client update 10.7.2

Needed:

After Install:

  • Install Update * (DON'T RESTART!)
  • In MultiBeast check EasyBeast - VoodooHDA 2.7.3 - Realtek Gigabit
  • Restart

Patches'

Tick.png Tick.png
P6X58D-E X58 Bootloader is slow but works tested with 10.7.0 /1 /2 LAN Kext (Adapter 88E8056 AppleYukon2.kext) and audio Kext ALC8XX + applehda rollback using multibeast. Tick.png Tick.png
P8P67 LE P67 100% Working Just bootloader (Chimera) and audio/LAN kexts. Tick.png Tick.png
P5K Premium/WiFi-AP P35/ICH9R System Configuration:
  • Intel Q9400 CPU 2.66 GHz @ 3.66 GHz
  • 8400GS (256MB) works fully with GraphicsEnabler=y
  • 2x2GB 800 MHz Ram
  • Install Method: Retail Disk Image boot with myHack, then Apple Software Update to 10.7.2

Components Status:

  • Audio Out - ALC888; 3.5mm Headphones works, S-PDIF works, 5.1 surround 3.5mm outputs don't work (sub, r-left etc...).
  • Audio In - ALC888; Line-in works, to use a unpowered mic you need a amp or sound card, this card works.
  • Ethernet - Realtek, RTL8110SC; untested. Marvell, Yukon 88E8056; works, tested @ 100 Mbit/s.
  • Wireless b/g - Works, but shows up as 'Ethernet' not 'AirPort'. (See patch column)
  • USB - All Work
  • SATA - All Work
  • IDE - Untested
  • E-SATA - Untested
  • Shutdown/Reboot work 99% of the time.
Patches
<key>EthernetBuiltIn</key>
<string>Yes</string>

Useful Tools

Tick.png Tick.png
P5KPL-AM/PS Intel (R) G31 Hardware:
  • Intel Pentium Dual-Core E5400 2.70 GHz @3.24 GHz
  • 2x2GB DDR2 RAM Kingston 800 Mhz (Dual-Channel Interleaved mode)
  • WD Cavier Blue 500 GB SATA II Cache 16 MB (No AHCI)
  • Keyboard: MDtech USB Keyboard (Fully Support)
  • Mouse: hardware house USB
  • GPU: inno3d GeForce 9500 GT 1 GB DDR2
  • Monitors : Acer S202HL 1600x900 LED (Main) + PHILIPS 150E 1024x768 LCD
  • BIOS : AMI 0502
  • PSW : 500 W

Notes

  • DSDT from DSDTSE + modify to remove all warning (not important)
  • Delete unnecessary,unwant,panic kexts (about 40 kexts)
  • Chameleon 2.1svn r1573 from Chameleon Wizard
  • org.chameleon.Boot.plist (com.apple.Boot.plist) = UseKernelCache=Yes ,arch=x86_64 ,EthernelBuiltin=Yes ,Generate P&amp;amp;amp;amp;C States ,USB Bus Fix ,VBIOS (I think this stop KERNEL PANIC)
  • Dual-Boot Windows 7 Ultimate 64 bit + Mac OSX Lion 10.7.2 GM **(Install Chimera 1.5.4 FIRST and then install chameleon 2.1svn)**
  • smbios.plist --&amp;amp;amp;gt; iMac 11,1 (found the best for pentium dual-core ;) )
Kexts
  • VoodooHDA.kext (Latest) (Fix noise with Vectorize=Yes (Others boolean like this are Enabled) in info.plist in this kext)
  • Fakesmc.kext from Multibeast 4.0.2
  • NullCpuPowerManagement.kext
  • Lnx2mac RTL81xx kext
  • NvEnabler 64.kext
  • IOPCIFamily.kext 2.6 from 10.6.7 for recognize 4 GB ram
Tick.png Tick.png
P5KPL-AM/SE Intel (R) G31 Hardware:
  • Intel Core 2 Quad Q8400 2.67 GHz @3.40
  • 2x2GB DDR2 RAM Kingston 800 Mhz (Dual-Channel Interleaved mode)
  • Seagate Barracuda 500 GB SATA II Cache 32 MB (No AHCI)
  • Keyboard: Apple USB Keyboard (Old G3)
  • Mouse: Generic USB
  • GPU: NVidia GeForce 9800 GT 1 GB GDDR3 256bits
  • Monitors : Samsung P2470 1920x1080 LCD + Samsung P2470 1920x1080 LCD (very nice)
  • PSW : 500 W DUEX (Generic)

Install Method:

1. Bootcd HMBT LION DP4 with nvenabler or without nvenabler (http://www.hmbt.org/forum)

2. BaseSystem with Packages on a external Driver or Pendrive

3. Install kexts on http://www.appunix.com.br/howto/mac-os/p5kpl-am-se-hackintosh-mac-os-x-snow-leopard-lion-kexts-necessarias/ (Portuguese)

4. Very very very Easy

5. Install Chameleon 2 RC5 r1020 HMBT LION and SNOW

6. Thanks for HMBT (Hackintosh Brasilian Team, the bests)

7. 9800T Graphics Enabler (Full, Dual Display, Full Acelaration)

Kexts
  • VoodooHDA.kext (0.5.6.2)
  • Fakesmc.kext
  • RTGMac_v2.0.6
  • NvEnabler 64.kext
  • If you need you can use the package developed by me for layout ABNT2 Layout ABNT2
Tick.png Tick.png
P5KPL-AM EPU P35 + ICH9, BIOS 501 Hardware:
  • Intel Core2Duo E6420 CPU 2.13 GHz
  • XFX GT240 512 mb DDR3 works fully
  • 2x2GB 667 MHz Ram

Notes

  • BIOS: Store Configuration ATA/IDE Enhanced;Enhanced Mode Support:S-ATA; IDE Detect Time: 35
  • Audio - works with VoodooHDA_261_HP_HDX18 (Output and Inputs) edit Info.plist, replace the key IOPCIClassMatch by IOPCIPrimaryMatch and put the PCI ID of your audio card in string. View: http://www.insanelymac.com/forum/index.php?showtopic=267905
  • Ethernet - Works from pack Atheros AR8121 AR8113AR 8114
  • USB - All Work
  • IDE - Work
  • ICH9R - Works

Install Method:

  • 1.BootCD: Burn ISO in Cd
  • 2.iAtkos L1 from USB
  • 3. Boot with the comand: npci=0x2000
  • Bootloader: CHIMERA v.1.5.4
  • MacOsxUpp Combo 10.7.2
  • Shutdown/Reboot work 99.9% of the time.
  • Mac App Store WORKS!!!
  • iCloud WORKS!!!

Patches

  • Bootloader: Chimera v.1.5.4
  • Graphics Enabler
  • Built-in Ethernet
  • Extra/Extensions
  • FakesMc
  • Disabler
  • EVO Reboot

'

  • Sound+Ethernet: from download files

Useful Tools


Tick.png Tick.png
Maximus IV Extreme B3 Intel (R) P67 System Configuration:
  • Intel i7-2600K CPU
  • 8GB DDR3 RAM 1333Mhz G.Skill Ripjaws X
  • 1 SDD Crucial SATA III
  • 2 HDD Western Digital Black (AHCI)
  • Optical drive: 1 SATA DVD-RW
  • Keyboard: Logitech K800 WirelessUSB (Not fully supported)
  • Mouse: Logitech MX Performance (Full supported with Logitech drivers)
  • GPU: ATI HD6950 x2 (Crossfire does not work, obviously)
  • BIOS Version: 1902

Component Status:

  • Network: Works with Intel KEXT
  • USB: OOB
  • SATA: works
  • Audio: Works using Mutibeast and DSDT.aml
  • Restart/Shutdow: Works without issue

Install Method:

1. Used VMWare with a preinstalled image. Mounted my hard drive into VMWare and installed to physical drive.

Kexts
  • ALC8xxHDA.kext
  • ApplHDA.kext rollback
  • Fakesmc.kext
  • AppleIntelCPUPowerManagement.kext (Patched with SpeedStepper)
  • Intel E1000 NIC KEXT
Tick.png Tick.png
P8Z68 Deluxe Intel (R) z68 System Configuration:
  • Intel i7-2600K CPU
  • 8GB DDR3 RAM 1800Mhz
  • 1 HDD Hitachi 1.5TB SATA(VI)
  • Keyboard: chicony ps2 and Delux USB (both fully supported)
  • Mouse: Logitech MX 1000 (Full supported with Logitech drivers)
  • GPU: nVidia GTX 460 (ASUS) 1gb
  • BIOS Version: 0705

Component Status:

  • Network: Works with Intel KEXT
  • Realtek does not work
  • USB: OOB
  • SATA: works eSATA works
  • Audio: works with Multibeast : ALC8xxHDA , AppleHDA Rollback and Non-DSDT HDAEnabler ALC889 ^_^
  • Restart/Shutdow: Works without issue
  • Sleep: Works

Install Method:

1. Clean GM Install, then update. Dual booting with windows 7 UEFI installation without issue! Bootloader latest Chameleon with GraphicsEnabler=Yes and npci=0x2000. (on external thumb drive couse of the efi boot) Sorry for my BAD english

Kexts
  • Fakesmc.kext
  • AppleIntelCPUPowerManagement.kext (Patched with SpeedStepper)
  • AppleIntelE1000e.kext
  • VoodooPS2Controller.kext (for ps2)
  • JMicron36xeSATA.kext (eSATA)
  • Smbios: iMac12.2 (for speedstep to work)
  • Speedstep WORKS
Tick.png Tick.png
P7H55D - M EVO INTEL H55 System Configuration:
  • CPU: Intel Core i3
  • GPU: Nvidia 9500GT 1GB(Out of Box)
  • RAM: 2x2GB DDR3 Corsair 1600Mhz
  • HDD: Seagate SATA (AHCI mode)
  • Keyboard: USB
  • Mouse: Magic Mouse
  • Dual Monitors using VGA and DVI from Single Video Card

Component Status:

  • All works

After using Mac App Store 10.7.1 I was able to use the 10.7.2 ComboUpdate. I've had no issues and I did not need to reapply any patches.

Patches
  • Chimera (from MultiBeast) + arch=x86_64

VoodooHDA from Multibeast. Edit .plist for Voodoo to reduce gain at boot. This patch was done at initial 10.7.1 install.

Tick.png Tick.png
Maximus IV Extreme B3 Intel (R) P67 System Configuration:
  • Intel i7-2600K CPU
  • 16GB DDR3 RAM G.Skill Ripjaws X
  • 2 SDD Onyx SATA III
  • 2 HDD Western Digital Black (AHCI)
  • 1 HDD Western Digital Green (AHCI)
  • Optical drive: 1 SATA Blu-Ray
  • Keyboard: Razer Anasi (not fully working)
  • Mouse: Razer Naga (full support with drivers)
  • GPU: ATI HD6950
  • BIOS Version: 1902

Component Status:

  • Network: Works with multibeast
  • USB: OOB
  • SATA: works
  • Audio: Works using Mutibeast
  • Restart/Shutdow: Works without issue

Install Method: 1. Used Lion 10.7 GM USB Hack (google it) 2. Copied DMG to Snow Leopard mounted restored to flash drive 3. booted off flash drive and installed 4. boot into snow leopard ran extra lion to install on drive that had lion 5. downloaded Fake SMC put on lion drive 6. used multi beast for lion and installed cpu powermanagment to lion drive 7. boot into lion run multi beast for audio and network reboot 8. ran updates from software update

Pathces
  • Fakesmc.kext (from web)
  • Multibeast for AppleIntelCPUPowerManagement.kext, Audio Voodoo 2.7.3, network
  • Extra lion
Tick.png Tick.png
P5KС Intel (R) P35 Hardware:
  • Intel Core 2Duo E8200 2.66 GHz
  • 2x2GB DDR2 RAM Kingston 800 Mhz (Dual-Channel Interleaved mode)
  • WD Cavier Blue 300 GB SATA (AHCI)
  • Keyboard: USB
  • Mouse: USB
  • GPU: ZOTAC 320 mb 8800GTS
  • Monitors : Samsung 275T
  • BIOS : Modified 1203 BIOS with AHCI support
  • PSW : 450 W

Notes

Kexts
  • AttansicL1.kext
  • Other kexts from iAtkos L1
Tick.png Tick.png
Sabertooth P67 INTEL P67 Hardware:
  • Intel I7 2600k
  • 4x2GB DDR3 RAM corsair vengance 1600 Mhz (Dual-Channel Interleaved mode)
  • Maxtor 320gb 7200 rpm
  • Keyboard: USB
  • Mouse: USB
  • GPU: ati radeon sapphire hd 6850 1 gb ddr5
  • Monitors : acer
  • BIOS : 2001
  • PSW : 500 W gorilla

Notes

  • DISABLE cpu id (everything else it can be on)
  • Install lion 10.7.2 with the Xmove and pick up only kexts such as audio lan etc DO not install the loader from chimera otherwise it will boot at 32 bit
  • to boot use the loader that comes with the installation it works good!
Kexts
Striker II NSE Nforce790i SLI Kexts used in S/L/E all in verdants v2.3 support files Install them there or you will have issues
  • Ionetworkingfamily.kext modified by me :)
  • AppleNforceAta.slash.kext since I have over 3gb of ram
  • JmicronATA.kext (When I replaced this existing kext it helped my raid become more stable)

Files in Extra

  • Com.apple.boot.plist
  • DSDT.aml upper case for chameleon to read it needs to be modified so you do not lose your bios settings. (http://netkas.org/?p=114) I used dsdtse to extract, DO NOT USE THE INSTALL DSDT OPTION YOU WILL WRECK YOUR OS!
  • smbios.plist

Files in E/E

  • Openhaltrestart.kext
  • Disabler.kext
  • Fakesmc.kext
  • Platformuuid.kext

My org.chamelon.Boot.plist

  • <key>EthernetBuiltIn</key>
  • <string>Yes</string>
  • <key>GraphicsEnabler</key>
  • <string>Yes</string>
  • <key>Kernel</key>
  • <string>mach_kernel</string>
  • <key>Kernel Flags</key>
  • <string>arch=i386 maxmem=3456 npci=0x2000 darkwake=0</string>
  • <key>Legacy Logo</key>
  • <string>Yes</string>
  • <key>Timeout</key>
  • <string>2</string>
  • Bios revision 0901 you can save your bios setting under tools in your bios :) 32 bit Q6600 CPU @ 2.4 Ghz overclocked in bios to q6800 6gb ram 2 1gig 2 2gig all by ocz
  • After installing IPC 10.5.6 or Hazard 10.6.6i follow youtube video [5] after snow leopard 10432 which is 10.6.0 is installed use the combo update by apple 10.6.8v1.1 Do not use software update causes issues
  • Sound=Voodoohda.kext works no digital audio yet..airfoil is what I used to get audio to stream to airport express for the time being. Also if using vlc delay audio to -2050. Want to turn your hack into a airplay speaker? http://asktherelic.com/2011/04/11/air-speakers-for-everyone/ autostart? https://github.com/albertz/shairport/blob/master/INSTALL.md edit org.mafipulation.shairport.plist to change the airplay name before you load into launchctl
  • Video=Nvidia Gtx280 works hdmi full 1080p no audio via hdmi yet
  • Ethernet=Both On board nic's work. Used Netkas support files installed ionetworkingfamily.kext in S/L/E then showed the packages contents and deleted nvenet.kext in plugins then put NforceLan.0.64.5.kext (This improved the stability of the machine immensely and torrent downloads now seem stable!)
  • Ide works OOB
  • Sata works
  • Usb works
  • Esata rocketraid 2302 port1 running a Raid10 enclosure w (4) 1TB 7200 rpm drives, port 2 using a Single HD dock with (1) 500GB 7200rpm both drives work simultaneously Enable plug and play OS in bios use maxmem=3072 as a boot flag if using 4gb of ram or more still useable if you want e-sata support. AppleNforceATA.slash.kext needs to be updated for raid support see this link http://code.google.com/p/darwin-ata/issues/detail?id=2
NO Tick.png Tick.png
Asus P5K-VM Nvidia GeForce 8600 GT 256 MB System Configuration:
  • Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz
  • Chipset Intel G31/G33/G35
  • Lan Marvell Youkon 88E8056 PCI-E Gigabit Ethernet Controller
  • Audio ALC 883
  • 2048 MB Ram DDR2 Kingston
  • 2 Hard Drives: WD1600AAJS-22WAA0 ATA Device (160GB)
  • Western Digital WD5000AAKS-55V0A0 ATA Device (500GB)
  • DVD-Rom Drive ASUS DRW-2014S1

Install Method:

Tick.png Tick.png
P5L-MX Nvidia GeForce 9600 GT System configuration:
  • Intel® Core™2 Duo Processor E4600

(2M Cache, 2.40 GHz, 800 MHz FSB)

  • Chipset Intel® 945G + ICH7
  • LAN Attansic L1
  • Audio Realtek ALC883
  • 2 x 1GB Corsair 666MHz DDR2 RAM (part # VS1GB667D2)
  • 1xHD sata (MBR, 4 partitions, Triple boot (GRUB) : Debian, OSX, Win XP)
  • 1xDVD RW ide
Installation method:
  • Update from a fubar Snow Leopard 10.6.8
  • unplugged all unnecessary hardware
  • Retail Install Lion App
  • Mod to install on MBR
  • Instructions to prepare the installation image and additional kexts here used a SATA drive instead of a USB pen drive.
  • Boot with rBoot from tonymacx86
  • Installation (went smoothly)
  • Reboot with rBoot
  • Downloaded 10.7.2 and updated no snags
  • MultiBeast 4.1.0: Lion Edition before reboot.
  • AttansicL1Ethernet.kext
  • Audio kind of working with VoodooHDA.kext (only speakers)
  • Sleep not working.
Tick.png Tick.png
P5Q Deluxe Intel P45 System configuration:
  • Intel Core 2 Duo 3Ghz
  • 2 x 2GB Kingston 800Hz DDR2 RAM
  • Asus Nvidia GTS 250 512Mb
  • SoundBlaster Audigy 2
Installation method:
  • Note: I Used MultiBeast 4.1.0 for the following operations.
  • Fix Ps2 Keyboard Issue:
- From MultiBeast: in "Drivers..."/"Kexts..."/"Miscellanous", check "PS/2 Keyboard/Mouse..."
- Open Terminal from install drive (or flash drive install disk)
- Enter: vi Volumes/OSX/System/Library/CoreServices/Setup\ Assistant.app/Contents/Info.plist
- Delete these lines:
<string>DeviceSection</string>
<string>KeyboardTypeSection</string>
  • Sound Blaster Audigy 2
- Install kXAudioDriver-1.11b0 drivers
  • OnBoard audio
- Install VoodooHDA 2.6.3
  • Ethernet (Marvell Yukon 88E8056 PCI-E Gibgabit Ethernet)
- Install IONetworkingFamily.kext (Drag & Drop over kext utility)
- Go in System Preferences/Network; then click ok on warning; then click Apply
  • VideoCard:
- Open "MultiBeast" in "Customization"/"Boot Options", check: "32-bit Apple Boot Screen" and "PCI Root ID Fix"
- Find and open "com.apple.boot.plist", then add/replace the following lines:
<key>Graphics Mode</key>
<string>1920x1200x32</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>-v</string>
  • Bootloader
- Install Chimera 1.6.0 (not the one from MultiBeast)

All working!!!

Not tested yet Tick.png

ECS

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
ECS G31T-M7 Rev 1 Intel G31/ICH7

System Configuration:

  • BIOS version: rev 1
  • Intel Core 2 Duo E4500 2.2GHz
  • NVIDIA 6600 256MB DDR2
  • 3GB RAM DDR2 667Mhz

Notes:

  • Install method - Lion.dmg iAtkos L2 10.7.2
  • Bootloader: Chameleon latest with bootloader option standard logo apple

Components Status:

  • Audio - Works
  • Video - Works
  • Ethernet - no test ( yukon marvell )built in
  • Ethernet - test( realtek 81039c ) pci card
  • Sleep/Wakeup - Works
  • Shutdown/restart - Works
  • Mac App Store - Works
  • iCloud - no test

Personal note:

  • Perfect hackintosh .

Patches:

  • Audio - select all voodoHDA
  • ethernet - install realtek pkg for chipset 8139c
Tick.png Tick.png

EVGA

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
EVGA X58 FTW3 Intel x58/ICH10

System Configuration:

  • BIOS version: rev 83
  • Intel Xeon 5620 2.4GHz
  • NVIDIA GTX560 1024MB DDR5 Zogis
  • 12GB RAM DDR3 1333Mhz (show as 1066)

Notes:

  • Install method - Lion.dmg iAtkos L2 10.7.2
  • everything as default just select *IOPCIFamily, AHCI SATA Intel, Jmicron IDE, ALC8xx, ALC892, USB 3.0, Realtek RTL8111/8168
  • Video with 5XXX package from kexts.com follow the instructions editing plist and thats all.

Components Status:

  • Audio - Works
  • Video - Works HDMI Works "no audio from hdmi"
  • Ethernet - Works
  • Sleep/Wakeup - not tested
  • Shutdown/restart - Works
  • Mac App Store - Works
  • iCloud - no test

Personal note:

  • Good hackintosh .

Patches: Just for Video.

Tick.png Tick.png

Foxconn

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
P35A Intel P35/ICH9

System Configuration:

  • BIOS version: 6B3F1P43
  • Intel Core 2 Duo E4500 2.2GHz
  • NVIDIA GTX275 896MB DDR3
  • 4GB RAM DDR2 1066Mhz

Notes:

  • Install method - Lion.dmg restored and installed from 8GB thumb drive
  • Bootloader: Chameleon 2.1 r1666
  • Update to 10.7.2 by using Software Update

Components Status:

  • Audio - Works
  • Video - Works
  • Ethernet - Works OoB
  • Sleep/Wakeup - Works
  • Shutdown/restart - Works
  • Mac App Store - Works
  • iCloud - Works

Personal note:

  • Perfect hackintosh - I've had no issues and I did not need to reapply any of previously applied patches.

Patches:

Tick.png Tick.png
G41M-S Intel G41/ICH7

Install Method:

  • xMove + Multi-Beast

Notes:

  • Bootloader: Chimera 1.6
  • Update: 10.7.2 Combo Update
  • Video: Intel GMA 4500, no QE/CI only native
  • Multi Beast:
  • Easybeast
  • System Utilities
  • Lnx2Mac
  • Kextbeast
Tick.png Tick.png

Gigabyte

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
GA-P31-DS3L Intel P31 ICH7 Hardware:
  • Intel Dual Core E5500 CPUs
  • nVidia pixelview GT 210 graphic cards
  • 2 GB DDR2 SDRAM
  • Hitachi 250Gb Drive

Notes:

Kexts Tick.png Tick.png
GA-P31-DS3L Intel P31 ICH7
  • CPU Intel 1.6 GHz Dual Core Celeron
  • NVidia GeForce GT 8500 512 MB
  • 2GB Kingston RAM [email protected]
  • Install Method: Kakewalk (with fresh installation):
  • Installed with laikexpert Guide:[6]
  • Installed with laikexpert Guide:[7]
  • Updated with 10.7.2 Combo Update
  • All works except Sleep Mode
Tick.png Tick.png
X58A-UD7 Intel X58A ICH10 Hardware:
  • Intel Core I7 1336
  • ATI Sapphire 5770
  • 10 GB DDR3 SDRAM

Notes:

Kexts Tick.png Tick.png
X58A-UD3R Ver 2.0 bios FF Intel X58A ICH10 Hardware:
  • Intel Core I7 1336
  • ATI Radeon HD 5770 XFX

Notes:

Kexts
  • Binpatched ALC889 AppleHDA
Tick.png Tick.png
GA-EP35-DS3P Intel P35 ICH-9R
  • Kernel: vanilla
  • Sound: Realtek ALC889A
  • Ethernet: RTL8111B
  • USB, Firewire - works OOB
  • Shutdown/Reboot - works OOB
  • Sleep: works with SleepEnabler kext
  • Sound: VoodooHDA [8]
  • Ethernet: Lnx2Mac's RTL81xx Driver [9]
  • DSDT patching (minor)
Tick.png Tick.png
GA-EP45-UD3R rev 1.1 Intel G31/ICH7 System Configuration:
  • Intel Core 2 Quad Q9550 @ 2.83 GHz
  • 12 GB (2x4GB + 2x2GB) DDR2 PC6400 RAM
  • 128 GB Crucial C300 SSD (Boot)
  • 1.5 TB Western Digital Caviar Green 5900 RPM HD (Storage)
  • 500 GB Western Digital Caviar Blue 7200 RPM HD (Backups_
  • EVGA GTX 460 1 GB SC GDDR5 1 GB PCI-e Graphics Card
  • On-Board Gigabit Ethernet
  • DWA-556 Xtreme N Wireless PCI-e Card
  • IOGear USB 2.0 Bluetooth 2.1 Adapter
  • HP Webcam 3100
Tick.png Tick.png
GA-G31M-ES2L rev 2.4 Intel G31/ICH7 System Configuration:
  • Intel Core 2 Quad Q9550 @ 2.83 GHz
  • 8 GB (2x4GB) G.Skill DDR2 PC6400 RAM
  • 128 GB Crucial C300 SSD (Boot)
  • 1.5 TB Western Digital Caviar Green 5900 RPM HD (Storage)
  • EVGA GTX 460 1 GB SC GDDR5 1 GB PCI-e Graphics Card
  • On-Board Gigabit Ethernet
  • DWA-556 Xtreme N Wireless PCI-e Card
  • IOGear USB 2.0 Bluetooth 2.1 Adapter
  • HP Webcam 3100
  • OS X 10.7 Lion GM (MaLd0n's USB Install Guide) + Upgrade to 10.7.1 +10.7.2
  • DSDT Auto-Patcher, Multibeast (UserDSDT), Lnx2Mac RTL Kext, Gigabyte ALC8xx, Reinstall AppleHDA10.6.2.pkg, GraphicsEnabler=Yes, npci=0x2000
  • For all working specs, please visit My Blog
Tick.png Tick.png
GA-EP45-DS4 rev 1.0 Intel P45/ICH10R System Configuration:
  • on-board mod bios F10b based
  • Intel Core 2 Quad Q9550 @ 2.83 GHz
  • 8 GB (4x2GB ) DDR2 800mhz RAM Geil
  • PNY-Nvidia Quadro FX 4600 768mb
  • 4X Sata2 Seagate 500 gb 32mb buffer
  • DVD Pioneer DVR-215D Bulk sata
  • on-board ALC889a
  • 2X Ethernet Realtek 8111C (only 1 works)
  • on-board 2x Firewire ports (OOTB)
  • USB (OOTB)
  • Audio card : MOTU 828 MK3 Firewire (drivers Motu)

Note:

  • Install method: IatkosL1 + soft.updt
  • using unmod bios you must use a proper dsdt, sleep, reboot, c-state patches
  • Quadro : OOTB with graphics enabler, you can use also last quadro + cuda drivers
Selections:
  • Chimera
  • Graphics Enabler
  • Fakesmc + plugins
  • intel mainboards sensors
  • Smbios MP3,1
  • Intel sata kext
  • Jmicron SATA/IDE (not tested)
  • Lan Realtek 81xxx
  • Audio ALC885_889a (replace in S/L/E after each updt)
Tick.png Tick.png
GA-Z68X-UD3-B3 Intel Z68/ICH10 Hardware:
  • Intel Core i7 2600k
  • 4 GB DDR3 Kingston Value RAM
  • 1 TB Samsung Spinpoint 7200RPM
  • MSI GTX 560 TI Twin Frozr ll

Notes:

Kexts:
  • All drivers from Multibeast
  • For full QE/CI: added dev id to NVDAGF100HAL.kext, installed ATY_init.kext, set GraphicsEnabler to yes, npci=0x2000, followed this guide
  • DSDT from the Tonymacx86 DSDT Database
Tick.png Tick.png
GA-Z68X-UD4-B3 Intel Z68/ICH10 Hardware:
  • Intel Core i7 2600k
  • 16 (4x4gb) GB DDR3 1600 Mhz Corsair Vengeange
  • 1 TB WD Caviar Green
  • 2x115gb Corsair SSD in raid 0
  • Gigabyte GTX 560
  • Bluray Burner Lg HL-DT-ST BD-RE BH08LS20

Notes:

  • Installed with Tonymac's guide Unibeast: Tonymacx86Multibeast
  • Sleeping doesn't work well.
  • Some problem with firewire while wake up from sleep mode.
Kexts:
  • All drivers from Multibeast
  • For full QE/CI: added dev id to NVDAGF100HAL.kext, installed ATY_init.kext, followed this guide
  • DSDT from the Tonymacx86 DSDT Database
  • Info set up Boot Raid0 on Lion: it was a bit tricky but I mix-match this two guide Raid 0 Guide (but I didn't downloaded it's files, just used bootloder in Tonymac's multibeast installarer; it's perfectly ok. Then I followed this guide Raid 0 Guide 2 (just followed the command parts no efi reset)
Tick.png Tick.png


GA-EP43-UD3L Intel P43+ICH10
  • CPU Intel 2.8 GHz Intel Core 2 Duo
  • NVidia GeForce GTS 450 1024 MB
  • 4GB Kingston RAM [email protected]
  • Install Method: Kakewalk (with fresh installation):
  • Installed with laikexpert Guide:[10]
  • Installed with laikexpert Guide:[11]
  • Updated with 10.7.2 Combo Update
  • All works except Sleep Mode
Tick.png Tick.png

GA-EP41-UD3L

Intel G41 / ICH7 Chipset

  • Install method IAtkos L1 DVD
  • CPU: quad core q9550
  • Graphics: NVIDIA 8400gs 256MB Fully recognized with QE/CI working
  • Sound works with alc8xx.kext and hdae888.kext
  • Sleep Mode not working
  • Updated to 10.7.2 via online Software Update
? Tick.png

Z68X-UD3H-B3

Perfect chipset

  • Install method IAtkos L2 DVD
  • CPU: I7 2600
  • Graphics: Onboard HD 3000 Fully recognized with QE/CI working
  • Sound works with hdmi audio applehda.kext http://www.tonymacx86.com/viewtopic.php?t=33592&p=215126
  • Sleep Mode doesn't work yet haven't tried to fix it
  • sata works
  • RocketRaid 2302 Raid 10 port multiplier works (4) 1 tb 3.0 gb's 7200 rpm drives
Tick.png Tick.png

Intel

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
DH67BL H67 Intel® Core i7 2600
  • 16GB DDR3 1333Mhz
  • nVidia® GTX460 - Dual Ready - Full Support
  • (ZOTAC® GTX460 - 768MB)
  • Intel® 82579V Gigabit Ethernet Controller
  • Intel® High Definition Audio - Realtek ALC892
  • USB 3.0 Renasas
  • iBoot + Multibeast 4.1.0 (without DSDT.aml) if problems, use DSDT fixer
UserDSDT Install
  • ALC 8xx , ALC Rollback, ALC892 Enabler
  • Fake SMC
  • NullCPUPowerManagement
  • hank's AppleIntelE1000e Ethernet
  • USB 3.0 Renesas Patch
  • For nVidia - edited AppleGraphicsPowerManagment.kext, edited NVDAGF100Hal.kext (added device id 0e22), Open Cl patched GeforceGl.bundle. to download all the kest and bundle, Clickhere
  • use GraphicsEnabler=Yes for nVidia
  • Some HDD move than &amp;amp;amp;gt;1TB isnt boot of 4kSector Problems, if it is, install Chameleon in EFI before reboot
  • for kext request - iamdines at gmail . com
Tick.png Tick.png
DP67DE B3 P67 Intel core i3 2100 ok
  • 8gb ddr3 1333 - to install use 4gb ram
  • radeon hd4850 sapphire 512mb - ok dual display
  • network intel 82579v
  • realtek alc892
  • usb 3.0 nec/renesas
  • fw400 - native
  • iBoot 3.1.1 with PCIRootUID=1 -x thanks to user raketa [12]
  • installed with Multibeast 3.8.0 UserDSDT and Dsdt.aml from DSDT fixer
UserDSDT Install
  • DSDT.aml
  • alc8xxhda, alchdaRoolBack and alc892 enabler non-dsdt
  • ati hd48xx injector, ati hd48xx patch 10.6.8
  • usb 3.0 nec/renesas patch
  • hnak´s AppleIntele1000 Ethernet
  • NullCPUPowerManagement.kext
Tick.png
DX58SO X58 Intel core i7 920
  • BIOS 5591
  • 6gb DD3 1600
  • XFX AMD HD6870 Black Edition 1024mb 4x Displays
  • Onboard Intel Gigabit
  • Creative X-Fi Fatal1ty PCI-e (Voodoo Audio 2.7.3)
  • WD 320GB Blue HDD
  • iATKOS 10.7.1 L1 + Software Update to 10.7.2
  • installed with Multibeast 3.8.0 UserDSDT and Dsdt.aml from DSDT fixer
UserDSDT Install
  • DSDT.aml
  • USB Fix
  • Voodoo Audio 2.7.3
  • hnak´s AppleIntele1000 Ethernet
  • EvOReboot
  • Intel SATA AHCI
  • Chimera Bootloader
  • System IDs as Late 2008 Mac Pro, Vanilla 64bit install, updates through Software update no issues. 1 Caveat to video, if using HD6870 w/ Active MiniDP to DVI adapters, at login you must unplug and replug them or screen is distorted. Then you log out and in again for wallpaper to display properly on all 4 monitors. After this everything is perfect. Researching solution.
  • Cannot get Audio Input to work on Creative Fatal1ty X-Fi. Using cheap (&amp;amp;amp;lt;) USB sound card for microphone support. My onboard audio is dead, though it is supposedly compatible.
Tick.png Tick.png
D945GCNL Intel D945 ICH7 Intel E6600 Core2 Duo - 2GB + 2GB DDR2 - GMA950 - AHCI Mode SATA
  • Install Method: Retail Disk Image install on Hackintosh or Mac - Mac OS X 10.7 (11A511) - Chameleon 2.0 RC5 r1171
  • GMA950 - Works "Dual Display 1920*1200"
  • Ethernet - works
  • 10.4 - 10.7 compatible "based on development-platform motherboard"
  • Software update works from 10.7.0 - 10.7.1 - 10.7.2

Extra

  • DSDT.aml
  • org.chameleon.Boot.plist

S/L/E

  • fakesmc.kext
  • RealtekRTL81xx.kext
  • IONetworkingFamily.kext
Tick.png Cross.png

MSI

Hardware Name Chipset Notes Patches Used 32/64bit working with patches
H55M-E33 Intel H55 System Configuration:
  • Intel Core i5-750
  • 4x2GB DDR3 1330MHz (Kingston)
  • 2x1TB SAMSUNG HD103SJ
  • ASUS GeForce EN210 Silent 512MB
  • Broadcom USB Bluetooth Adapter (0x016a, 0x050d) to connect my Magic Trackpad

Installation: I tried to upgrade my Snow Leopard Installation with tonymac86's guide but i failed.

The Installer-partition was not fully bootable until I copied my SL-/Extra onto it.

Afterwards Installation was possible and i did a fresh install.

Patches via Multibeast 4.0.3:
  • ALC8xxHDA + ALC889 HDAEnabler
  • 3rdParty SATA + eSATA + JMicron36x (not sure if needed)
  • ElliotForceLegacyRTC
  • FakeSMC
  • Lnx2Mac's RealtekRTL81xx
  • Chimera v1.5.4 r1394
  • Kernelflags: npci=0x2000 GraphicsEnabler=yes (for full QE/CI with Asus GeForce EN210 Silent)

Sleep:

  • To fix the CMOS reset after sleep look here
  • To fix reboot after wake make sure you tick the two boxes in energy preferences: automatic restart on power failure and automatic restart on freeze(!)
  • BIOS: Suspend mode S3
  • Also had to disable wake by USB, otherwise Magic Trackpad (or the bluetooth adapter) wakes the system after going to sleep (is there a fix?)
Yes Yes

Graphics Cards

Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.

PCI-E

AMD/ATI

Model Board-Manufacturer Notes QE Output Dual Display 32/64bit
X1800XT MSI Native Support by PIEROF81… Tick.png 2x DVI Tick.png Tick.png Tick.png
Radeon HD 4350 512MB DDR2 HIS Follow this tutorial Tick.png DVI Tick.png Tick.png Tick.png
Radeon HD 4850 512MB Sapphire Needed "Legacy4800Controller.kext" in the E/E. Occasional glitches (static on screen for a few seconds) when returning from sleep.GraphicsEnabler=Yes Tick.png DVI Tick.png Tick.png Tick.png
HD5870 1024MB Vapor-X Sapphire OOB Tick.png DVI Not Tested Tick.png Tick.png
RADEON HD6850 1024MB DDR5 Sapphire OOB (to enable hdmi audio http://www.tonymacx86.com/viewtopic.php?f=162&t=32037), GraphicsEnabler=No (recognized as ATI Radeon HD6xxx) Tick.png DVI/HDMI & DVI/DVI Tick.png Tick.png Tick.png
HD 6870 Sapphire Sapphire 11179-09-20G HD 6870 1GB GDDR5 Native Support Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
HD 6670 Sapphire Sapphire HD 6670 512MB GDDR5 Native Support Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
HD 6870 XFX Native Support Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
HD 5770 1GB GDDR5 XFX Native Support Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
HD6950 2048MB/1024MB XFX/Asus Works with Netkas 6970 fix and flashed to 6970 BIOS. UVD does not currently work (iTunes cover flow) Tick.png DVI/VGA/HDMI Tick.png Tick.png Tick.png
HD5670 1024MB powercolor OOD,you need to have graphice enabler =Y,and the aticonfig=Vervet [Vervet is case senstive] Tick.png HDMI working in full 1080p didn't test other ports Tick.png Tick.png Tick.png
Radeon HD 4870 XFX Native Support Tick.png DVI Tick.png Tick.png Tick.png

NVIDIA

Model Board-Manufacturer Notes QE Output Dual display 32/64bit
8400 GS 512MB DDR3 Zotac Works OOB with GraphicsEnabler=Yes , see [13] Tick.png DVI/DVI/HDMI Tick.pngTested Tick.pngTested Tick.pngTested
8400 GS 256 or 512MB PNY Works with GraphicsEnabler=y Tick.png DVI/DVI/mHDMI Tick.png Tick.png Tick.png
ASUS EN8800GTS 512 G92 ASUS works full qe/ci with these http://www.mediafire.com/?vk6wu84za7aao8l . Install the kexts with the program provided.If doesn't work try changing the device id in the info.plist of the kext with your own(you can find it in system profiler) Tick.png DVI/DVI Tick.png Tick.png Tick.png
GeForce 9500GT XFX 1 GB model with NVEnabler 64.kext And with GraphicsEnabler=Yes in com.apple.Boot.plist Inside Extra Folder, DVI works Great (but VGA also Works. Defect is that When You Try To Change Resolution Monitor Goes OFF must Restart For Changing Resolution) Tick.png VGA/DVI/HDMI Not Tested Tick.png Tick.png
GeForce 9500GT inno3d 1 GB model with NVEnabler 64.kext Tick.png VGA/DVI/HDMI Tick.png Cross.png Tick.png
9600M GS 512MB 9600GT 512MB Works with GraphicsEnabler=yes npci=0x2000 Tick.png HDMI Tick.png Tick.png Tick.png
GeForce 9600GT 512MB MSI GraphicsEnabler=Yes Tick.png DVI/DVI Tick.png Tick.png Tick.png
GeForce 9800GT 1GB ??? G92 Enabler from iAtkos L1 Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
GeForce 210 512mb GDDR3 ASUS GraphicsEnabler=Yes npci=0x2000 Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
GeForce 210 1024MB GDDR2 Galaxy GraphicsEnabler=No, Use OSX86Tools to create a custom EFI String. See [14] for directions. Worked instantly on reboot without causing other issues. Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
GeForce EN210 SILENT/DI/512MD2(LP) ASUS GraphicsEnabler=Yes npci=0x2000 Tick.png VGA/DVI/HDMI Tick.png Tick.png Tick.png
GeForce GTX275 896MB DDR3 Leadtek All methods working: DSDT patch, EFI string or NVenabler64.kext; Tick.png DVI/DVI/ Tick.png Tick.png Tick.png
GeForce GT 430 1 GB Pixelview Followed 3rr0rists guide Tick.png VGA/DVI/DVI/HDMI Tick.png Tick.png Tick.png
GeForce GTX 460 1GB Gainward GraphicsEnabler=Yes npci=0x2000 Tick.png DVI Not Tested Tick.png Tick.png
GeForce GTX 460 GLH 1024MB Gainward Works with GraphicsEnabler=Yes and PCI Configuration Fix (npci=0x2000) Full QE/CI Support! Tick.png VGA/DVI/DVI/HDMI Tick.png Tick.png Tick.png
GeForce GTX 460 SC 1GB EVGA GraphicsEnabler=Yes npci=0x2000 Tick.png DVI/DVI/mHDMI Tick.png Tick.png Tick.png
GeForce GTX 465 1GB Zotac Installed GF100 10.7.2 Driver from Multibeast, GraphicsEnabler=Yes npci=0x2000 Tick.png DVI/DVI/mHDMI Not Tested Yet Tick.png Tick.png
GeForce GTX 480 MSI+ZOTAC Works OOB with iAtkos Lion GraphicsEnabler=Yes npci=0x2000 Tick.png DVI/DVI/mHDMI Tick.png Tick.png Tick.png
GTX560 1GB Zogis added device id to NVDAGF100hal. GraphicsEnabler=Yes, npci=0x2000, PCIRootUID=1 in boot.plist, Use GTX5XX Enabler from Kexts.com,

Thats it

Tick.png DVI/DVI/mHDMI(no audio) Tick.png Tick.png Tick.png
GTX 560 ti 1GB MSI added device id to NVDAGF100hal.kext, installed ATY_init.kext, GraphicsEnabler=Yes, npci=0x2000, followed this guide,

installer here

Tick.png DVI/DVI/mHDMI Tick.png Tick.png Tick.png
GTS 250 512Mb Asus Using MultiBeast, in "Customization"/"Boot Options", check "32-bit Apple Boot Screen" and "PCI Root ID Fix", reboot. If you still have only one resolution, edit "com.apple.boot.plist" file (use Finder to locate it) and add/replace the following lines:
  • <key>Graphics Mode</key>
  • <string>1920x1200x32</string>
  • <key>GraphicsEnabler</key>
  • <string>Yes</string>
  • <key>Kernel</key>
  • <string>mach_kernel</string>
  • <key>Kernel Flags</key>
  • <string>-v</string>
Tick.png DVI Not Tested Yet Not Tested Yet Tick.png

Network Cards

Wireless

Interface Standard Device Manufacturer Chipset Notes 32/64bit working with patch
PCI 802.11n 300Mbps DWA-547 D-Link Atheros Works as native Airport Extreme card. Only need to edit IO80211Family.kext in S/L/E/IO80211Family.kext/Contents/PlugIns/AirPortAtheros21.kext/Contents/Info.plist/ add: <string>pci168c,29</string> Cross.png Cross.png
PCI-e Wireless-N 300MBps DWA-556 D-Link Broadcom Works OOB Tick.png Tick.png
USB b/g/n TEW-649UB TRENDnet Download 10.6 Installer from [15] Tick.png Tick.png
USB b/g/n TEW-648UBM TRENDnet Download 10.6 Installer from [16] Tick.png Tick.png
PCI 802.11G(108G) DWL-G520 D-Link Atheros patched IO80211Family.kext Tick.png Tick.png
PCI Wireless-N 300MBps TL-WN851N TP-Link Broadcom 32-bit PCI Omni Directional, 2 Detachable Antennas; Works OOB as native Airport Extreme card in all versions of OS X since 10.5. Cross.png Cross.png
PCI 802.11n TL-WN951N TP-Link Broadcom Works OOB Tick.png Tick.png
USB 802.11b/g 54Mbps DWL-G122 D-Link Ralink Download and Install in S/L/E RT73USBWirelessDriver.kext + install RalinkAirport.app + install RalinkWirelessUtility.prefPane (google) Tick.png Tick.png
USB 802.11b/g/n DWA-140 D-Link Ralink Works with Ralink's installer (RT2870) Download here. Tick.png Tick.png
PCIE 802.11n 150Mbps TL-WN781ND TP-Link Atheros 9285 Works as WI-FI. Only need to edit IO80211Family.kext in S/L/E/IO80211Family.kext/Contents/PlugIns/AirPortAtheros21.kext/Contents/Info.plist/ add: <string>pci168c,002b</string>, <string>pci168c,30a1</string> or rename Apple80211Monitor.bundle + inject in DSDT method Thread Tick.png Tick.png
PCIE 802.11n 150Mbps TL-WN781N (Lite) TP-Link Atheros 9285 TESTED on i5, working in Mac OS X Lion 10.7.2 (11C74), appears as "AirPort Extreme (0x168C, 0x30A1)". Needed kexts: AtherosFix.kext and IO80211Family.kext. Then edit IO80211Family.kext in S/L/E/IO80211Family.kext/Contents/PlugIns/AirPortAtheros21.kext/Contents/Info.plist/ add: <string>pci168c,002b</string>, <string>pci168c,30a1</string>. Also edited same for AirPortAtheros40.kext, as well as added to plist for AtherosFix.kext. Kext wizard to install. Tick.png Tick.png

Wired (Ethernet)

Interface Standard Device Manufacturer Notes 32/64bit working with patch
PCI 1000/100/10 TG-3269 TP-Link Add the missing/removed vanilla S/L/E/IONetworkingFamily.kext/

Contents/Plugins/AppleRTL8169Ethernet.kext, from a 10.6.8 installation, to the same place in the 10.7.1 vanilla IONetworkingFamily.kext. No mods, it just works.

Tick.png Tick.png
OnBoard (P5Q Deluxe) 1000/100/10 Yukon 88E8056 PCI-E Gibgabit Ethernet Marvell Install "IONetworkingFamily.kext" (found it in a forum's Extra.Zip file) using MultiBeast's "Kext Utility" then reboot. If your internet source is already active from your router, go to "System Preferences"/"Network" and click "Apply" so the connection gets set up. Not Tested Yet Tick.png

Bluetooth Adapters

Interface Hardware Name Manufacturer Notes 32/64bit working with patch
USB Belkin Bluetooth®Adapter 100 metre range. Mac OS® X v10.2 or higher Belkin Plug'n'Play Tick.png Tick.png
USB USBBT100 Linksys Works OOB. Bluetooth networking (PAN) not supported. Tick.png Tick.png
USB UB22S Abe Works OOB. Tick.png Tick.png
USB Bluetooth USB Adapter BA530 Porto Works out of the box. ? Tick.png

Sound Cards

Other Accessories

Interface Hardware Name Manufacturer Notes 32/64bit working with patch
USB Sound Blaster X-Fi Go PRO USB Sound Card Creative Labs Plug'n'Play Tick.png Tick.png
PCI Sound Blaster Audigy 2 Sound Card Creative Labs Install kXAudioDriver-1.11b0 drivers Not Tested Yet Tick.png
USB Sound Blaster X-Fi HD Creative Labs Works OOB Not Tested Yet Tick.png
Type of Accessory Item Description Manufacturer Notes 32/64bit working with patch
Vantec UGT-ST420R SATA expansion card (additional SATA connections). RAID capable Vantec Use SONNET TEMPO SATA E2P Driver for the card. Works like a charm. Tick.png Tick.png
Retrieved from "http://wiki.osx86project.org/wiki/index.php?title=HCL_10.7.2&oldid=60772"
Powered by MediaWiki © 2021 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki   |   Privacy policy   |   About OSx86   |   Disclaimers