Editing HCL 10.7.2/Portables

Jump to: navigation, search

Warning: You are not logged in.

Your IP address will be recorded in this page's edit history.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 2,395: Line 2,395:
 
*I am dual booting with Windows 7 Ultimate 64bit and i used  the GUID Partition table on the 650gb drive. First partition is Mac OSX Lion and second is Windows 7 Ultimate. Just boot from the iAtkos L2 DVD using the -v flag and partition the hard drive if you doing a dual boot. After installation you will have a chance to choose what operating system you want at the iAtkos boot screen
 
*I am dual booting with Windows 7 Ultimate 64bit and i used  the GUID Partition table on the 650gb drive. First partition is Mac OSX Lion and second is Windows 7 Ultimate. Just boot from the iAtkos L2 DVD using the -v flag and partition the hard drive if you doing a dual boot. After installation you will have a chance to choose what operating system you want at the iAtkos boot screen
 
*One note: Do not do the install with more than 4GB RAM. Pull the extra out and reinstall after the OS is installed.
 
*One note: Do not do the install with more than 4GB RAM. Pull the extra out and reinstall after the OS is installed.
 +
 +
===Qosmio X505-Q8104X===
 +
{{QE|U}}
 +
Intel Core i7-2630QM Processor 2.0 GHz (2.9 GHz with Turbo Boost Technology), 6MB L3 Cache
 +
*Mobile Intel HM65 Express Chipset
 +
 +
*Install Method: Unibeast +10.7.2 combo update + EasyBeast or iAtkos method above for the Q8102X, I used a combination of the two trying to get a vanilla system with dsdt. Until the dsdt is properly edited nothing but kernel panics so use easybeast or iatkos. Don’t use an extracted dsdt until someone can patch it. Most important note, do not run multibeast until all proper kexts for trackpad, wireless, Ethernet, are properly installed using kext wizard along with a restart after each individual kext. Don’t do anything out of order unless you want to start over.
 +
 +
*Audio: Intel High Definition Audio use VoodooHDA 0.2.72 volume shortcuts on laptop work
 +
 +
*Video: NVIDIA GeForce GTX 460M with 1.5 GB GDDR5 discrete graphics memory. Fixed with Multibeast Fermi Drivers
 +
 +
*Bluetooth (USB): Haven’t tested yet
 +
 +
*BlueRayDVDrw: Works OOB
 +
 +
*Ethernet: Works with AtherosL1cEthernet.kext.
 +
 +
*WiFi: To get the WiFi to work I had to install the Atheros AR9285 driver Kext from iatkos or install manually with kext wizard using this. Get the kext here [http://www.osx86.net/downloads.php?do=file&id=1279]
 +
 +
*Keyboard & TrackPad: Use generic AppleACPIPSNub.kext and ApplePS2Controller.kext with kext wizard, restart, and use kext wizard again with the keyboard fix above for the Q8102X.
 +
 +
*WebCam: Works OOB after multibeast.
 +
 +
*Battery: Needs Voodoo Battery kext for battery levels to be seen, still working on this, I think it needs to be installed using kext wizard before multibeast is installed for Battery Level icon to show.
 +
 +
*Shut Down/Reboot: works fine
 +
 +
*Installation order for unibeast+multibeast.
 +
*Install with Unibeast
 +
*Update with 10.7.2 Combo Update
 +
*Install Kexts in this order
 +
**Ethernet
 +
**Wireless
 +
**Trackpad. sudo touch /System/Library/Extensions + restart after each
 +
**Run multibeast
 +
***Easybeast
 +
***Audio: Voodo HDA 2.7.2
 +
***Video: Fermi Package
 +
***Smbios: MacBook Pro 8,1
 +
**Touch File extensions and reboot
 +
 +
Everything will work out of box, except you won’t be able to see battery life. I’ll repost the install method once I figure out the battery fix, the iatkos method from the Toshiba X505-8102X from above gets everything working plus battery icon, but I wanted the cleanest install possible to so I went for the unibeast method.
  
 
===Satellite L755-1NV===
 
===Satellite L755-1NV===

Please note that all contributions to OSx86 may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see OSx86:Copyrights for details). Do not submit copyrighted work without permission!

Cancel | Editing help (opens in new window)
Powered by MediaWiki © 2021 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki   |   Privacy policy   |   About OSx86   |   Disclaimers