HCL 10.8.2

macOS 10.8.2 Hardware Compatibility Portable Computers Desktop Computers Hardware Components

This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.

• ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
• Please add hardware into tables.
• This is for 10.8.2 builds only.

For how to edit the Wiki, please see this thread. Thank you!

You're looking for an Installation guide? see here

Note: For suggestions about table headings, please join the discussion here.

Motherboards

Abit

Hardware Name	Chipset	Notes	Patches	32/64bit working with patches

Asrock

Hardware Name	Chipset	Notes	Patches	32/64bit working with patches
ASRock P67 Extreme4 Gen3	Intel P67	System configuration: Intel i7 2600k DDR3 1600MHz 3x4GB nVidia GeForce GTX 560 Ti-448 1280MB Audio Realtek ALC892 LAN Realtek RTL8111E Component status: Wireless (Rosewill RNX-N600UBE) works with Ralink RT2870 driver by editing kext with new decimal device ID number Audio - ACL892 modified AppleHDA and HDAEnable1.kext Ethernet - Realtek RTL8XXX kext USB 2.0 - works OOB Shutdown/Reboot - works OOB Sleep - ??? GFX - works OOB	Installation method: myHack with 10.8.2 InstallESD.dmg from AppStore Post install: audio and LAN kexts NOT Working: Sleep mode USB 3.0
Z77 Extreme 4	Intel i5/3570k	WORKING: LAN, Integrated video, Nvidia Video NOT WORKING: USB 3 - still some weird issues like lockups or USB locking, audio - weird ports but working, sleep, and weird display artifacts from time to time. Installed using Chimera Once OS X 10.8.2 was running on Chimera side I copied the .plist files (smbios and org.chameleon...) The system would now go into OS X successfully, but not before then. Inserting a USB Thumb drive locks up OS X, so I insert it prior to booting. Fixed? Applied the Broadcom network patch using KextWizard Nvidia GTS 450 - Kept going to a black screen (no signal) once it would hit the login screen. Didn't appear to be an out of range issue with the resolution. I installed the Nvidia Fermi Open CL Patch. That still didn't fix the issue, so I rebooted -x -v -F and got in. Once I was in, I rebooted once again without any boot flags. Failed! Added entries to org.chameleon.Boot.plist: npci=0x2000, PCIRootUID=0 ALC898 Audio Fixed by Applying Realtek AC8XX Patch - kind of. Ports are off. I installed all of FakeSMC, including plugins, BUT it locked up at the spinning icon. To fix that, I had to download FakeSMC r616 from OSX86.net and copied over manually from terminal. I tried this to fix my artifacts that appeared on the screen. It did NOT work.	Patched Bios version 2.50, Broadcom: 3089-BCM57781.zip (IONetworkingFamily.kext), Nvidia Fermi Open CL Patch, Realtek AC8XX Patch
P45X3 Deluxe	Intel P45/ICH10	Installed using USB , Audio works after installing kext (ALC888),BootLoader Chameleon (latest)
G41MH/USB3	Intel Core Duo 2	Installed using a bootloader on USB, With No-Execute Memory Enabled and PCIRootUID=0. Boot Problem fixed after install.
H77 Pro4-M	Intel H77	Installed using a bootloader on USB, With PCIRootUID=0. Configuration: Celeron G540, Asus EN210 1GB Gefroce 210 PCIe 16x Graphic, 2x 4GB DDR3, Intel SASAUC8i PCIe 8x SAS Controller, HP NC360T PCIe 4x Dual Gigabit Ethernet, 1x 64GB SSD, 13x SATA 2TB HDD, Bluetooth: D-Links BT-120. Everything OOB. Sound and onboard Ethernet not OOB not further tested not needed for server use. All 8 SATA Ports working, USB 3.0 works Shutdown/Reboot: works Sleep/ Hibernate / Wake: works WOL and WOD: works with HP NC360T	BIOS: modded BIOS from http://biosrepo.wordpress.com/, factory settings. Own DSDT (only removed "\_SB.PCI0.NWAK (Arg0)" from extracted DSDT) removed NullCPUPowermanagement.kext, Patched_10.7_AppleRTC.kext
Z75 Pro3	Intel Z75	Everything working fine (even USB3, HDA, and onboard graphics), only required minor patches to the DSDT, and no BIOS patches were necessary	No BIOS patches, DSDT patched with IRQs and _HID suffix must be all hex digits (GH), used Realtek ALC892 without DSDT patch
H61M-S 1.80	Intel H61	System configuration: Intel i5 2500k stock clocks DDR3 1333MHz 2x2Gb XFX Radeon 4850 512 Mb Audio Realtek ALC662 Component status: CPU speedstep works with patch Audio works - 10.8.2 ALC 662 kexts Ethernet - Atheros 8151 kext Wireless - Edimax dongle (Ralink 3070 chip) works with drivers from Ralink USB 2.0 - Native work Shutdown/Reboot - Work Sleep - Work with properly edited DSDT GFX - 48xx kexts for 10.8.2; dual display working	Installation method: installation via chameleon Mountain Lion 10.8; updated with combo update to 10.8.2 Post install no DSDT required for installation but to get working sleep a properly edited DSDT is required, SSDT required to enable speedstep, GraphicsEnabler=Yes after 48xx kexts, AppleIntelCpuPowerManagement.kext patch required, FAKESMC.kext, AtherosL1cEthernet.kext Ethernet Built-in required to obtain iCloud and AppStore access; Messages fix with Clover; NOT Working: Everything works!
AsRock G41M-VS3 R 2.0	Intel H61	System configuration: Intel C2Q 83000 8GB Corsair DDR3 1333 RAM 1TB Seagate Barracuda HDD Nvidia GT 210 1gb DDR3 Silent Audio VT1705 (VoodooHDA) Ethernet Atheros (maolj's ethernetL1cEthernet) Asus N10-USB wireless Component status: Audio - works with kext from from tutorial Ethernet - works with AtherosL1cEthernet also from tutorial Wireless - Asus N10 works with this RTL8192SU_MacOS10.6_1079.zip Shutdown/Reboot - Work Nvidia GT 210 1gb DDR3 Silent works but cant get dual display to work yet, and hdmi also not tested yet (working with Lion)	Installation method: BIOS to 1.70 or 1.60 works. ACPI HPET Table - set to ENABLED No-Execute Memory Protection - set to ENABLED using myHack App the only way that works for me, tried many other ways .. all failed. Post install install audio and ethernet Ethernet Built-in required (/Extra/org.chameleon.Boot.plist) Mac App Store and iCloud working by following this article http://www.osxlatitude.com/how-to-fix-icloud-appstore-facetime/2/ NOT Working: Doesn't wake up from sleep mode Alternative guide: If this doesn't work for you you can follow the tutorial. It is a bit more in depth than this.
ASROCK Alive SATA2-GLAN	VIA® K8T890 CF	System Configuration Hardware CPU = AMD Athlon 64 X2 4600+ RAM = 1 Gig ddr2 800mhz HDD 1 = ATA IDE IBM Deskstar 20 gig HDD 2 = SATA Seagate 250 gig Optical Drive = dvd-cdr LAN = Onboard Realtek RTL81xx Audio = Onboard ALC888 Graphics = Nvidia Geforce 6200 Turbo Cache Installation Method Niresh DVD iso Component Status Graphics = Working somewhat. glitches in icons ghosting on the desktop and flashy things LAN = Using Lnx2Mac after install its perfect Audio = No success as of yet USB = Several issues such as connection loss requiring replugging GENERAL OS = Locks up ALOT. only 1 gig of ram may be a source of this problem. the more the better. Have not yet gotten out of Safe mode. At best it freezes up at where i am thinking it loads Graphics. No flags have helped me past this, and it seems to require my cpu flags to get that far cpus=1 cores=2 busratio=12 is the portion i use. Installation = Took 3 days to get near a complete install, and have yet to see the "installation successful" screen. at the best i have gotten to "install failed, could not restart from drive" or something close to that. more often installer freezes at "about a minute" But in both cases, i restart off the HDD and just try it. have been successful twice with the cant restart and once with a less than a minute freeze. Install Bootflags = amd -v GraphicsEnabler=No npci=0x2000 ahcdisk=1 UseKernelCache=No Get To OSx Bootflags = -v -x GraphicsEnabler=No debug=8 (and maybe the rest of the above here, have had mixed results) Customizations = Less is more. in fact, experiment with removing items if you think you wont need them. The odds are if you add even one driver your Installer is going to freeze. It probably will anyways.	Summary OSx Mountain Lion on AMD In General, I would say if you have a good OSx Lion, or Snow Leopard, stay with it. The stability of this on AMD is far far from ideal. It requires too many resources and is more prone to total collapse. There are huge issues with the CPU timings from the AMD chip and OSx ML. The install disk I have does not have an option to run installer without the base system to go back to get more drivers. And many times i had to Boot into Snow Leopard to remove files and make edits on the ML driver and Am still not able to get out of safe mode. And as much as my system freezes up, Im not sure I want to. Go download the OSx ML desktop images and add them to your OSx SnowLeopard. It's not like Apple has broken any real new ground here for the resource cost. If you have my config, Try an install off a true Vanilla. I think you will have greater successs and no niresh customizations (or who knows what else). I appreciate his work in putting this together and being able to try it, but to be honest, it has been the most difficult OSx install I have ever experienced. It is locked up right now as i type because i though I could unmount a script he left for us. And his Lion version never saw the installer. Good luck to the rest of you hardcore AMD fans.

Asus

Hardware Name	Chipset	Notes	Patches Used	32/64bit working with patches
M3A78-EM	AMD 780G + SB700	Using Niresh 10.8.2 ML Disk Result: Graphics Lagging No Sound But Worked With A Little Glitch You Have To Boot with Installer Disc Then Choose OS X Installed HDD So It Boots (Work On It)	Within Disk Necessarily Only By Customization By One & Only Mr. Sagar Bedi
P5E-Deluxe	Intel X48	System configuration: Intel Core 2 Quad 9550K Chipset Intel X48 MSI GTX 580 Lightning works by default Wireless Adapter ASUS WL-138g V2 Component status: Audio - Sim (HDMI and by Audio card) ASUS WL-138g V2 - Yes Ethernet - Not tested USB 2.0 - Yes Shutdown/Reboot - Yes Sleep - No	Installation method: iATKOS ML2 Post install Install Chimera 2.1.1 (fix iMessenger error) Install VoodooHDA AD1988B 7.1: Line-out (green rear) - Don't show in audio settings Line-out (black rear) - Back speakers Line-out (orange rear) - center speaker Line-out (grey rear) - No sound (probably because I'm using a 5.1 speakers) NOT Working: Will sleep fine, but waking doesn't work. FaceTime (probably i need to have a camera) Notes: Mac App Store and iCloud work now, only with iATKOS ML2 installation.
P5B	Intel P965/ICH8	System Configuration: Install method: App Store purchase. Then App Store Update to 10.8.2 CPU: Intel Q9650 3GHz Detected as Quad-Core Intel Xeon Memory: Samsung M378T5663EH3-CF73E DDR2 666 MHz 4 x 2Gb, Dual-channel HDD: SAMSUNG HD103SI 1TB SATA Video: ASUS GeForce EN210 Silent 512Mb DDR3 Audio: Digidesign MBox2 Pro FireWire, Logitech HD Webcam C510 USB Ethernet: Realtek® PCI-E Gigabit (onboard) Webcam: Logitech HD Webcam C510 Bluetooth: D-Link DBT-122 Peripherals: Apple Keyboard A1243, Apple Trackpad A1339 PCI cards: ST-Lab FireWire Controller (TSB43AB23 chip), UAD-2 SOLO DSP Shutdown: Yes Restart: Yes Sleep: Not tested FaceTime/iCloud/App Store: working Bootloader: Chameleon v2.1svn r2035 SMBIOS: MacPro3,1	Patches: BIOS: SATA in AHCI mode. Disable Serial and Parallel ports. Memory remap, ACPI 2.0, ACPI APIC options enabled. Kexts: FakeSMC, RealtekRTL81xx Kernel flags: npci=0x2000 GraphicsEnabler=Yes EthernetBuiltIn=Yes USBBusFix=Yes
P5E3 Premium/Wifi-AP	Intel X48 - ICH9R SATA Bios v.0803	System Configuration: CPU: Intel Core2Quad Q9550 @ 3.4 GHz GPU: ATI HD 4870 TOXIC 512Mb Works RAM: 4x2GB DDR3 Corsair Xms3 1600MHz CL9 Components Status: Audio - Works with limitation Ethernet Marvell - Works (PERFECTLY!) Ethernet Realteck - Disabled for iCloud WiFi - Not tested, try with AirportExtreme USB - Works (all) Shutdown/Reboot - Works Sleep - Not works iCloud/App Store/FaceTime/iMessage Works Install method: Mountain Lion installed yet Client update 10.8.2	After Install: (DON'T RESTART!) Delete AppleHDA.kext from Extensions folder Install those kexts into S/L/E - VoodooHDA 2.7.3 - 3rd Party SATA - ElliottForceLegacyRTC - EvOreboot - FakeSMC - NullCPUPowerManagement System Definition -> Mac Pro 3,1 Add Marvell.kext in Extension folder Download and run Kext Utility Restart Run with -v -f flags
P5G41T-M LX3	Intel G41 Express / Intel ICH7	System Configuration: Video: Intel GMA X4500 (onboard - Not working) Audio: Realtek ALC887 (onboard) Ethernet: Gigabite Ethernet (onboard) Shutdown, Restart and Sleep working FaceTime, iCloud and App Store are NOT working Install Method: 10.8.2 App Store Purchase, Restore Basesystem.dmg to pen drive, Modified OSInstall, Chameleon.	Kext Patches: Gigabit Ethernet . Kext Helper to install. Audio with best sound on any hackint0sh.
P5KPL/1600	Intel G31 / Intel ICH7	System Configuration: Processor: Intel Core 2 Quad 9550 Video Card: EVGA Nvidia GeForce GTX 550 TI FPB Audio: VIA VT1708B Ethernet: Realtek 8110SC Gigabit LAN controller 4GB RAM Kingston 800Mhz Working: Audio Ehernet USB Shutdown and Restart (Sleep not tested, but i didn't apply the fix) Video w/ dual monitor	Install Method: iAtkos ML2 Install using secure and verbose mode "-x -v" to avoid kernel panic during install procedure Disable any audio kext on customization screen The remaining options set as default Extra kexts: Audio: VoodooHDA 2.8.4 (Follow the instructions from the kext package) Ethernet: AppleRTL8169Ethernet.kext (Installed w/ Kext Wizard)
P5KPL-AM/PS	Intel G31/ICH7	System Configuration: Install method: App Store purchase. Then App Store Update to 10.8.2 CPU: Intel Pentium Dual-Core E5400 @2.70 GHz RAM: Kingston 2x2GB DDR2 800 MHz CL6 HDD: WD Cavier Blue SATA II 500 GB Video: Inno3d GeForce 9500 GT 1 GB DDR2 Usage: These are all works, shutdown ,restart ,FaceTime ,App Store ,iCloud Bootloader: Chameleon v2.1svn r2064 (Or The Latest one) SMBIOS: iMac11,2	Patches: BIOS: ACPI 2.0, ACPI APIC options enabled. Kexts: FakeSMC, RealtekRTL81xx, NVEnabler 64, NullCPUPowerManagement, VoodooHDA 2.7.3 (modified), CUDA Kernel flags: EthernetBuiltIn=Yes USBBusFix=Yes GenerateCStates=Yes GeneratePStates=Yes UseKernelCache=Yes
P5PL2-E	Intel 945G/ICH7	System Configuration: Install method: App Store purchase. Then App Store Update to 10.8.2. CPU: Intel C2D E6400 2.13GHz (Overclocked to 2.33Ghz) Memory: Corsair DDR2 667 MHz 2 x 1Gb, Dual-channel HDD: WD5000AADS-00S9B0 500Gb SATA Video: GeForce 9500 GT Silent 1024Mb Audio: M-Audio ProFire 610 (via ST-Lab FireWire Controller vs TSB43AB23 chip) Ethernet: Realtek® RTL8111B PCI-E Gigabit (onboard) Bluetooth: D-Link DBT-122 Shutdown: Yes, Restart: Yes, Sleep: Not tested FaceTime/iCloud/App Store: working Bootloader: Chameleon v2.1svn r2035 SMBIOS: MacPro3,1	Patches: BIOS (v0601, 01/19/07): SATA in AHCI mode. Serial and Parallel ports - disabled. Microcode updation, Execute Disable Function, ACPI 2.0, ACPI APIC options - enabled. Enhanced C1 Control, Hyper Path 3, Dram Trolling Threshold, Suspend Mode options - Auto. Kexts: FakeSMC, RealtekRTL81xx, IOPCIFamily and AppleACPIPlatform (from www.osx86.net). Kernel flags: GraphicsEnabler=Yes EthernetBuiltIn=Yes USBBusFix=Yes If you forget enable Execute Disable Function in BIOS - mach_kernel boot will not start. If you forget copy IOPCIFamily.kext and AppleACPIPlatform.kext to /S/L/E and rebuild kext cache - video will not work.
P5Q-Deluxe	Intel P45/ICH10R	System Configuration: CPU: 3 GHz - OC Core2Duo Q8300 Bios: Modded Bios (2301) with SLIC, DSDT Fix and SLI -- thx to SHAMAUX Memory: 4 GB DDR2 800 MHz - OC HDD: 1000 GB SATA Video: NVIDIA GeForce 9500 GTX+1GB Audio: Analog Devices ADI2000 (onboard) Ethernet: modified IONetwork OSX86 (onboard) Shutdown, Restart and Sleep working FaceTime, iCloud and App Store working Install Method: MyHack+AppleML (10.8) on 2nd HDD Partition ==> Install to 1st Partition Fix Network by OSX86 http://www.osx86.net Update to 10.8.2 via SW-Update online	Added To "Extra" Folder: smbios.plist: iMac9,1 org.chameleon.Boot.plist Kext Patches: sleepenabler to /S/L/E AD2000 to /S/L/E AppleHDA.kext to /S/L/E
P5Q-E	Intel P45/ICH10R	System Configuration: CPU: Intel Core2Quad Q8400 - OC @ 3.4 GHz Bios: 2101 stock modded with SLIC, nothing else. Memory: 8 GB DDR2 1066 MHz HDD: 128 GB Crucial M4 Video: NVIDIA GeForce GTX 560Ti Audio: Analog Devices ADI2000 (onboard) Ethernet: Marvell Yukon 88E8056 modified IONetwork OSX86 (onboard) Second Ethernet: Marvell Yukon 88E8001 with kext Shutdown, Restart and Sleep (with sleepenabler) working. FaceTime, iCloud and App Store working. Install Method: Vanilla ML (10.8) booted with Chameleon 1820, with patched OSInstall.pkg (for MBR), installed directly on the SSD Fix the Yukon 88E8056 by editing the PNPID inside the IONetworkingFamily kext Update to 10.8.2 via SW-Update online	Added To "Extra" Folder: smbios.plist: MacPro 3,1 org.chameleon.Boot.plist with: npci=0x2000 and GraphicsEnabler=Yes dumped and compiled DSDT and SSDT. Kext Patches: sleepenabler to /E/E skge for the Yukon 88E8001 to /E/E/ AD2000b to /E/E HDAEnabler to /E/E/ NullCPUPowerManagement to /E/E AppleHDA.kext to /S/L/E Extra stuffs: OpenCL patch for the GTX 560Ti (look in Google for"GeForceGLDriver.bundle opencl perl") Official nVIDIA CUDA Drivers.
P8H61-M LX3 PLUS R2.0	Intel® H61(B3)	System configuration: CPU: Intel® Pentium® Processor G860 (3.00GHz, 3M Cache) GPU: AMD Radeon™ HD 6670 (1GB DDR3) RAM: Transcend DDR3 1333MHz 4 GB LAN: Realtek® 8111F BIOS version: 0802	Installation method: Using iAtkos ML2 from a flash drive: 1. Formatted the flash drive (8 GB) to Mac OS X Extended (Journaled) [used Master Boot Record] 2. Dragged the iAtkos ML2 DMG to Disk Utility, mounted it and restored it to the newly created partition of the flash drive. 3. Ran the Chameleon installer and installed it to the flash drive. 4. Set HDD as AHCI instead of IDE in Advanced Setup in the BIOS (UEFI) and enabled VT-x as well 6. Booted from the flash drive. 7. Formatted a partition as Mac OS X Extended (Journaled) in Disk Utility and selected the following customizations: - Bootloader - Bootloader options: Kernel Cache, Built-in Ethernet (Note: I disabled Graphics Enabler because it wouldn't go past the Apple loading screen. Feel free to experiment.) - Patches: FakeSMC, Disabler, EvoReboot, RTC Patch - Mac model: Mac Pro 5,1 - Drivers: - SATA/IDE: AHCI SATA, AHCI Internal, Non-AHCI SATA - Network (Note: Don't select Sound! We'll add that later!) 8. Started the system with -v and removed AppleTymcedriver.kext [How-To] (Case-sensitive! Use Tab to autocomplete when using!) 10. Download the driver VoodooHDA 0.2.72 only. 11. Run Kext Utility (It's in Applications/Utilities/Tools) and let it do its thing. 12. Reboot and you should have everything working. If the sound is too low or the volume slider isn't working, click here for a guide to fix the common issues (can fix some kernel panics if you're having those!) Note: You may have to go to System Preferences, Sound, Output and switch it to Line-Out (Green Rear) to hear sounds if you're not using digital-out.
P8Z68-M Pro	Z68	System Configuration: CPU: Intel Core i5 2400 @ 3.1GHz GPU: XFX Radeon HD 6870 1024 MB RAM: 2x4GB DDR3 G.SKILL CL9 RipjawsX Keyboard: Apple Keyboard Mouse: Logitech MX518 Components Status: All works, sleep, wakeup, shutdown, restart, speedstep, USB3.0, HDMI, Updates Through MacAppStore For HDMI to work together with DVI and two screens on XFX Radeon HD 6870 use AtiConfig=Gibba w/o any modifications on ATI6000Controller.kext and GraphicsEnabler=yes in org.chameleon.Boot.plist Install method: Tutorial	Patches: Latest Chameleon Bootloader Kexts (FakeSMC, LNX2Mac's Realtek RTL81xx for LAN, Kext for Realtek ALC892 and USB 3.0 3rd Party) DSDT and SSDT, smbios.plist from iMac 12,2 Patched AICPUPM.kext (Lion 10.7.3) for Speedstep from InsanelyMac Modded Bios for P8Z68-M Pro
P8Z68-V PRO	Intel Z68	System Configuration CPU: Intel i7 2600k @ 4GHZ Video: Gigabyte 1280MB GTX570 Memory: 16GB Corsair Vengeance Blue DDR3 1600MHZ Hard Drives: 1x Corsair Force 3 120GB, 3xWD Caviar Black 1TB Audio: Realtek® ALC892 Ethernet: Intel® 82579 Firewire: TI 800/400 PCI Card Card Reader: NZXT Aperture M (through USB2.0 motherboard header) Peripherals: Logitech MK250 Keyboard/Mouse Monitors: Dual LG E2340 1080P Displays Shutdown: Restart: Sleep: FaceTime/iCloud/App Store: USB3.0: Bluetooth: SMBIOS: MacPro3,1	Install Method BIOS Configuration: version 1101, SATA in ACHI mode, Marvell controllers disabled, Bluetooth disabled Use USB install - need to use PCIRootUID=0 to get to install screen and first boot Use DSDT for 1101 BIOS AUDIO: Realtek ALC892 with DSDT GRAPHICS: NVIDIA Retail 304.000.00f20 OpenCL Patch MISCELLANEOUS: USB3.0 Third Party (both) NETWORK: hnak's AppleIntelE1000 Ethernet SYSTEM: Patched AppleIntelCPUPowerManagement BOOTLOADERS: Chimera v1.11.1 R1394 CUSTOMISATION: PCIRootUID=1 fix - IMPORTANT! After install and before reboot need to go into Mackintosh HD->extras-> and then open org.chameleon.boot.plist and change PCIRootUID=1 to PCIRootUID=0 and save SSDT OPTIONS: Sandy Bridge Core i7 Notes All booting, restarting and sleeping seems to be stable and hackintosh wakes up from sleep Updates from App Store work fine and so does installing normal apps Audio working fine and also works with drivers and external audio processing through Logic Pro 9 and an RME Fireface UFX Internet worked without kexts in initial installation, but haven't tested wheter or not the kexts are actually needed (just installed them anyway) USB3.0 Shows up in system profiler as Super-Speed USB bus, but not sure if true USB3.0 speeds are being achieved TI Chipset firewire card is also being read in a PCI slot but only the 400 ports (no 800 working yet) Haven't got bluetooth working yet (but not really necessary)
P8Z77-V DELUXE	Intel Z77	System Configuration: Install method: myHack 10.8.0. Then apply Combo update to 10.8.2 CPU: Intel Core i7 2600k 4.6Ghz detected as stock Intel Core i7 2600k Memory: 4x 4Gb G.Skill Ripjaw X 1600Mhz DDR3, Dual Channel at XMP mode HDD: 4 x 1Tb Seagate Barracuda 7200.12 SATA 2 AHCI mode. Video: ASUS GTX670 DirectCUII Top Audio: ALC898 Ethernet: Realtek 8111F + Intel 82579V Gigabit (both onboard) Bluetooth: BroadCom, Not Working USB 3.0: Not working Integrated WiFi: Not Working. Peripherals: Logitech K520 Keyboard + Mouse Wireless combo Shutdown: Yes Restart: Yes Sleep: Not tested App Store: Working Bootloader: Chimera 1.11.1 SMBIOS: iMac12,1	Patches: BIOS: SATA in AHCI mode. Disable Serial and Parallel ports. PCIe Primary Display selected. Kexts: Intially, only myhack ones. After the update to 10.8.2, added ALC898, Realtek And Intel LAN kexts Kernel flags: GraphicsEnabler=No. This has to be forced, to avoid whitescreen to appear before installation.
P8B75M LE	Intel® B75, Socket 1155 UEFI Bios ver. 0804 (Updated), HDD connected to 6GB SATA	System Configuration: CPU: Intel Core i3 2100 3.1GHz (3MB Cache) GPU: ATI HD 4870 Sapphire 512Mb GDDR5 RAM: 4GB DDR3 Kingston 1333Mhz HDD: 120GB Seagate (7200RPM 32MB Cache) Components Status: Audio - Disabled, I am using my DJ Controller Asio Driver (Hercules DJControl Instinct), and it works perfectly Ethernet Realtek® 8111F-VB-CG - Video/Graphics Card - Wireless Adapter - Works, Using SMC EZ Connect G USB2 + USB3 - Shutdown/Reboot - Sleep - iCloud/App Store/FaceTime/iMessage	Install method: UEFI Sata Configuration: AHCI (All the other settings in the BIOS were default) Format Disk: Extended Journaled Normal Mac Instalation (Only needed to add the PS\2 compatibility) Normal install, 100% compatibility Mountain Lion installed yet Client update 10.8.1 After Install: Had to change the monitor connector (DVI 1) on my graphics card and rebooted several times, to the other connecter (DVI 2) until the configuration was done (after that no more problems) LucidLogix® Virtu™ MVP Technology: Previous Win7 Boost Nothing else to add

Biostar

Hardware Name	Chipset	Notes	Patches	32/64bit working with patches
G31D-M7	Intel G31/ICH7	Realtek RTL8102EL - 10/100 Controller works with RTGMac 2.0.6 installer from Realtek, but crashes almost everytime. So it is not advisable to use. Use a separate USB/PCI WLAN/LAN Card	Used iATKOS ML2, standard install

ECS

Hardware Name	Chipset	Notes	Patches Used	32/64bit working with patches
ECS G31T-M	Intel G31/ICH7	System Configuration: ECS G31T-M (onboard LAN + Audio) Intel Core 2 Duo E6700 Nvidia GeForce 8400 GS 256M (using DVI) 4GB DDR2-800 SATA Drive formatted as GUID BIOS: SATA-Enhanced, HPET-Enabled, ACPI-S3, IntelXD Bit-Enabled(very important, otherwise won't boot) Installation Method: USB Boot + Mountain Lion app from Appstore. Disable onboard Sound+LAN during installation; enable them later. Install bootloader and some necessary kexts (or copy /Extra from the usb installation disk).	VoodooHDA for the sound (ALC662) to work

Foxconn

Hardware Name	Chipset	Notes	Patches Used	32/64bit working with patches

Gigabyte

Hardware Name	Chipset	Notes	Patches Used	32/64bit working with patches
GA-EX58-UD3R (v1.6)	Intel® X58 Express Chipset	System Configuration CPU: Intel Core-i7 920 @2.66GHz (Runs at 2.8GHz in OSX) Network: Onboard Realtek 8111C Audio: Onboard Realtek ALC888 (Legacy version) RAM: 3x2GB 1600MHz Corsair RAM (Triple Channel Kit) GPU: EVGA GeForce GTX 275 896mb HDD: 1TB WD Caviar Green Component Status: Video card works OOB Audio Works Perfectly Using DSDT DSDT correctly patched at tonymacx86 dsdt page. Sleep - Works Perfectly using DSDT	Notes I Have my board flashed to 1.6 FI Bios. Used unibeast. Only using FakeSMC, no other hacked kexts.
GA-B75-HD	Intel® B75 Express Chipset	System Configuration CPU: Intel Core-i3 3220 Network: Onboard 8188 Audio: on board Realtek HDA/ Externel: Fast Track Pro USB RAM: 4GB DDR3 1333 MHz GPU: nVidia Geforce GT 610 2GB HDD: 1TB WDC SATA II Component Status: Video card Audio Line Out(Green Rear) Audio Line In(Pink Rear) Sleep - goes to sleep but can't wake up	Notes Mountain Lion 10.8.2 By Niresh (AMD Kernel Patch with Intel Kernel (Atom) support) Customize while installing to select proper driver On board Ethernet doesn't detect automatically
GA-G31M-S2C	Intel® G31 Express Chipset	System Configuration CPU: Intel Core2Duo E7300 Network: on board Realtek RTL8101E Audio: on board ALC662 RAM: 2x Kingston 2GB DDR2 800Mhz GPU: NVIDIA GeForce 8600 GT HDD: 40GB IDE(OS) & 500GB SATA(Data Drive) Component Status: Video card Audio Line Out(Green Rear) Audio Line In(Pink Rear) Sleep - goes to sleep but can't wake up Notes iAtkos ML2 (default settings) clean install(upgrade from 10.7.5 also works but with some issues on certain Applications) boot drive partition MBR, drive format Journaled built-in Ethernet card not detected after install, used RTGNICv2.0.6For10.7 to resolve Component Status: Video card Audio Line Out(Green Rear) Audio Line In(Pink Rear) Sleep - goes to sleep but can't wake up	Kexts RTGNICv2.0.6For10.7
GA-Z68X-UD4-B3 rev1.0	Intel® Z68 Express Chipset	System Configuration: CPU: Intel Core I5 - 2500k @4600 GPU: Nvidia 480 GTX RAM: 2x4GB 1600Mhz Wifi USB Lynx300 Component Status: All works	Used: Sound works without DSDT, Wifi works with Ralink drivers from ralink´s home page.
GA EP45-UD3R Rev 1.1	Intel® P45+ICH10	Hardware: Core2Duo E8400 processor 3.00Ghz Ram 4GB DDR2 800MHz Kingston Saphire ATI HD 5770 1024MB GDDR5 Vapor - X Audio 889a|885 Patched 10.8.2 fix it http://www.mediafire.com/?z5sommvss9sg4nn in S/L/E iT Work!! Then navigate to /System/Library/Extensions/FakeSMC.kext/Contents/Plugins/ and delete OEMsmbios.kext Notes: Full Guide Thai Lang	Kexts FakeSMC in S/L/E NullCPUPowerManagement in S/L/E AppleHDA ALC889a/885 Lnx2mac After Finish Install Realtek Gigabit Ethernet 2.0.6 for 10.7
GA-Z77-DS3H rev1.0	Intel® Z77 Express Chipset	System Configuration: CPU: Intel Core i5 - 3570k GPU: AMD Radeon HD6670 RAM: Kingstone HyperX 2x4GB 1600Mhz Component Status: All works Notes: Install method - Mountain Lion.dmg installed from thumb drive Then App Store Update to 10.8.2	Gigabyte GA-Z77-DS3H pack [1] / all-in-one post-installation tool designed specifically for this motherboard and UEFI BIOS.
GA-H77-DS3H rev1.1	Intel® H77 Express Chipset	System Configuration: CPU: Intel Core G620 GPU: ASUS 8600GT 512MB RAM: Kingstone 1x4GB 1333Mhz Component Status: All works Notes: Install method - Mountain Lion 10.8.2.dmg installed from hard drive using chameleon 2203.	Works: Shut Down/ Restart Sleep/Wake up iCloud, Appstore, Messeges. FaceTime not tested Kexts FakeSMC in S/L/E AppleHDA ALC887 ALXEthernet.kext dsdt in S/L Gigabyte GA-H77-DS3H(Rev1.1) All in one [2] /
Z68AP-D3 uefi BIOS	Intel® Z68 Express	System Configuration CPU: Intel Core-i3 RAM: 8GB DDR3 1333 MHz GPU: nVidia GeForce 210 1024 МБ Network: Onboard RTL8111E Audio: Behringer UCA222 USB HDD: 120G SSD (OCZ-AGILITY2) Component Status: Video card Audio (I use USB soundcard, do not need to enable it yet) USB Audio works only in USB2.0 ports. Sleep - Wakes up by keyboard hit w\o problem	Notes Installed using USB stick method. Type "PCIRootUID=0" at boot from thumb drive. User DSDT or DSDT-Free installation (I have no DSDT) Realtek Lnx2Mac's	Not tested
GA-Z68P-DS3 rev1.2	Intel® Z68 Express Chipset	System Configuration: CPU: Intel Core i3 - 2100 GPU: AMD Radeon HD6450 RAM: Kingstone HyperX 2x4GB 1333Mhz Component Status: All works Notes: Install method - Mountain Lion.dmg installed from thumb drive Then App Store Update to 10.8.2 System working w/o DSDT with UEFI BIOS	Gigabyte GA-Z68P-DS3 pack [3] / all-in-one post-installation tool designed specifically for this motherboard and UEFI BIOS.
GA-Z68X-UD3H-B3 rev1.3	Intel® Z68 Express Chipset	System Configuration: CPU: Intel Core i5 - 2500K GPU: Intel HD3000/AMD Radeon HD6850 RAM: Kingstone HyperX 2x4GB 1333Mhz Component Status: All works properly with UEFI BIOS (noted few minor issues) Firewire doesn’t work properly after wake from sleep operation USB3.0 working but with lower read/write speed no USB issues with UEFI BIOS!!! (do your homework, check PDF instructions inside post installation tool pack) Notes: Install method - Mountain Lion.dmg installed from thumb drive Then App Store Update to 10.8.2 System working w/o DSDT with UEFI U1h BIOS	Gigabyte Z68X-UD3H-B3 pack [4] / all-in-one post-installation pack designed specifically for this motherboard and OS X 10.8. Fully patched DSDT included + several useful applications...
GA-EP43-DS3L	Intel® P43 Express Chipset	System Configuration: CPU: intel Core 2 Quad q9550 2,83Ghz GPU: nvidia geforce 8800 GT GPU: nvidia geforce gt 520 x1 Edition RAM: Corsair 4x2GB 1066Mhz BIOS: Cartri v.08 Component Status: All works Notes: Install method - Mountain Lion.dmg Then App Store Update to 10.8.2 System working NO DSDT	Sound patched with AppleHDA.kext and Legacy
GA-P35-DS3R (rev 1.0)	Intel P35/ICH9R	System Configuration: Install method: App Store purchase. CPU: Intel Q9300 @3GHz Detected as Quad-Core Intel Xeon Memory: TeamGroup DDR2 800 MHz 4 x 2Gb, Dual-channel HDD: 2x500 GB SATA on RAID 0 (AppleRAID version 2.0 software) Video: Leadtek GeForce 9800GT Green Edition 512Mb DDR3 Audio: Onboard ALC889A, Ethernet: Realtek® PCI-E Gigabit (onboard) Webcam: Webcam on monitor from Benq M2200 HD Link seen as QEye 2.0M pixel: from Chicony Electronics Co., Ltd. Peripherals: Apple Keyboard A1243, USB Mouse, Apple Remote with this hack Link Install method: Use this method Link to get a functionaly RAID 0. On short you need 3 drives, one to get ML fully installated and configurated an 2 drives to make a RAID 0 and with CCC to clone instalated ML from first drive to the otherd 2 drives wich have RAID 0 configurated.	Patches: Custom DSDT.aml Shutdown: Restart: Webcam: Sleep: Bootloader: Chameleon v2.1svn r2059 from here Link SMBIOS: MacPro3,1 BIOS settings : SATA in AHCI mode. HPET to 64, Disable Serial and Parallel ports. Kexts: FakeSMC, Kernel flags: EthernetBuiltIn=Yes and rd=uuid boot-uuid=your number to your RAID Identifier as Kernel flags
G41MT -D3V (rev. 1.3)	Intel® G41 Express Chipset/Intel ® ICH7	System Configuration: Install method: Retail install CPU: Intel DualCore E6750 2,66Ghz Memory: Kingston DDR3 1333 MHz 2 x 2Gb, Dual-channel HDD: Corsair F60 60GB SSD Video: Gigabyte GeForce 560GTX(non TI) 1024Mb GDDR5 Audio: Onboard ALC889 Ethernet: Realtek 8111E detect as RTL 8169 10/100/1000 Peripherals: Apple Wireless Keyboard , Apple Magic Mouse, Install method: Fresh Install Purchase Mountain Lion from the Mac App Store	Patches: DSDT.aml Bootloader: Chimera v1.11.1 r1394 SMBIOS: MacPro3,1 BIOS settings : HPET to 64, Disable Serial and Parallel ports. Kexts: FakeSMC, AppleHDA Realtek 2.0.6 for 10.7, If you use FakeSMC plugins, and get a kernel panic after reboot. Boot into safe mode by typing -x at the Chimera boot screen. Then navigate to /System/Library/Extensions/FakeSMC.kext/Contents/Plugins/ and delete OEMsmbios.kext. Then reboot Kernel flags: EthernetBuiltIn=Yes, GenerateCStates=Yes, GeneratePStates=Yes Works: Shut Down/ Restart Sleep/Wake up iCloud, Appstore, Messeges. FaceTime not tested
GA-X58A-UD3R	Intel P58/ICH10R	System Configuration: Install method: App Store purchase. Then App Store Update to 10.8.2 CPU: Intel i7-970 @3.20GHz Memory: Corsair DDR3 1600 MHz DominatorGT 3 x 2Gb, Tri-channel HDD: SSD Kingston 250Gb SATA3, HDD Seagate MomentusXT Hybrid 500Gb SATA2 Video: Asus ATI HD 4890 512Mb DDR3 Audio: Onboard ALC889, Ethernet: Realtek® Realtek 8111E 10/100/1000 Peripherals: Apple Keyboard A1243, USB Mouse. Install method: Myhack instaler 10.8.0, later patck 10.8.2	Patches: Custom DSDT.aml Shutdown: Restart: Sound 2.0: IDE/ATA: Sleep: Bootloader: Chimera v1.11.1 r1394 SMBIOS: MacPro5,1 BIOS settings : SATA in AHCI mode. HPET to 64.
GA-Z77X-UD3H	Intel® Z77 Express Chipset	System Configuration CPU: Intel i3-3770 (Ivy Bridge) GPU: 2X Inno3D Geforce 660 2048MB	Notes chameleon 2012 SMBIOS Mac Pro 3,1 If you want to use GTX 660 Display card,After install completes to reinstall display driver "http://www.nvidia.com/object/macosx-304.00.05f02-driver.html Kexts FakeSMC.kext AtherosL1cEthernet.kext AHCI_3rdParty_eSATA.kext No DSDT or SSDT VoodooHDA 0.2.7.4
GA-H67M-UD2H-B3 rev1.0	Intel® H67 Express Chipset	System Configuration: BIOS F6 CPU: Intel Core i5 - 2500K GPU: Intel HD3000 RAM: PNY 2x4GB 1333 Mhz Network: Realtek RTL 8111E Audio: ALC 892 Component Status: All works Notes: Install method - Mountain Lion.dmg 10.8.2 downloaded from App Store installed from thumb drive Be sure BIOS is F6, use DSDT for F6 DSDT, Realtek network and disks, Mac Mini 5,1 system config (do not install sound) ALC 892 sound using HDA Rollback	Patches: Custom DSDT.aml (from Tonymac for F6) Shutdown: Restart: Sound: IDE/ATA: Sleep:
GA-B75M-D3H	Intel® B75 Express Chipset	System Configuration: CPU: Intel Core i3 - 3225 GPU: Intel HD4000 (internal) RAM: Kingston HyperX 2x4GB 1600Mhz Component Status: All works except for VGA out Notes: DSDT, Realtek network, ALC887 v100302 current, System working w/o DSDT with UEFI BIOS	Patches: Remove HDAEnabler1.kext and use layout-id 0x03, 0x00, 0x00, 0x00 in DSDT/HDEF to enable HDMI audio Shutdown: Restart: Sound: Sleep:
GA-EP41-UD3L rev1.2	Intel® G41 Express Chipset	System Configuration: BIOS F5 CPU: Intel Core2Quad q9550 GPU: ATI HD 6670 RAM: PNY 2x2GB 800 Mhz Network: RTL8111C/D(L) Audio: ALC888 Component Status: All works Notes: Install method - Mountain Lion.dmg 10.8.2 downloaded from App Store installed from thumb drive Followed this tutorial Link	Patches: Custom DSDT.aml Shutdown: Restart: Sound: IDE/ATA: ? Sleep:
GA-Z77X-D3H Rev 1.0	Intel® Z77 Express Chipset	System Configuration: CPU: Intel Core i5 - 3750K GPU: Gigabyte OC Nvidia GT640 2GB RAM: GSkill 1600MHz 2x 4GB DDR3 SSD: Samsung 830 Series 128GB Component Status: Sleep, Graphics out of the box Only 4 USB ports (top four) on rear work when USB3 mode is on in BIOS (Have not tried USB2 legacy mode). (2x USB3, 2xUSB2) Front USB3 port working, front USB2 working No audio without patch TRIM enabled by default and working! Notes: PCIRootDevice = 1 required for boot (set in boot.plist) Installed Chimera System working w/o DSDT with UEFI BIOS, however no audio. MacPro3,1 System definition	Patches: Patch AppleHDA using guide here. Look at page 4, for the comment by nickw444 for basic instructions for DSDT modifications Custom DSDT for sound, see above ^ EvOreboot.kext Jmicron36xATA.kext Removed NullCPUPowerManagement.kext to enable sleep AHCI_3rdParty_SATA.kext IONetworkingFamily.kext IO80211Family.kext AppleACPIPlatform.kext Shutdown: Restart: Sound: Sleep:
GA-P41T-D3P Rev 1.5	Intel® G41 Express Chipset	System Configuration: CPU: Intel Core2Quad Q9550 GPU: Zotac NVIDIA GTX 560 1024 MB GDDR5 RAM: Kingmax 2x4GB DDR3 1333MHz RAM SSD: OCZ Vertex4 VTX4-25SAT3-128GB Component Status: all works Notes: Install method - Mountain Lion.dmg 10.8.2 downloaded from App Store installed from thumb drive	Patches: Custom DSDT.aml Shutdown: Restart: Sound: IDE/ATA: Sleep:
GA-Q77M-D2H	Intel® Q77 Chipset	System Configuration: CPU: Intel i5 3570 GPU: GA HD 6850 1024 MB GDDR5 RAM: Adata 2x8GB DDR3 1600MHz RAM SSD: Intel 330 series 180GB Component Status: all works incl. WoW 5.1 ;) not working: Blu-ray, still not testet: hdmi+dp Notes: Install method - ML install on different System, 10.8.2 downloaded from App Store and installed.	Patches: Replaced Ati6000Controller- and AppleACPIPlatform.kext by Version 10.8.1 no DSDT, FakeSMC Plugins Shutdown, Restart, Sleep: onboard NIC, SMC: Sound:
GA-P55A-UD3R Rev:1,Bios F8	Intel® P55 Chipset	System Configuration: CPU: Intel i7 870 GPU: ATI Radeon HD 4670 1024 MB DDR3 RAM: Kingston 2x4GB DDR3 1600MHz RAM HDD: WD 1TB Component Status: all works fine;) not working: hdmi Audio, PS2 keyboard, (Trying to Fix) Notes: Install method - Install using iATKOS ML2 using USB method.	Patches: no DSDT, FakeSMC Plugins Shutdown, Restart, Sleep: onboard NIC, SMC: Sound: Multiple Monitors:
GA-Z77-D3H (Rev. 1.1)	Intel® Z77 Chipset	System Configuration: CPU: Intel Core i7 2600k GPU: PNY Geforce 210 1GB RAM: 8GB Corsair Vengeance DDR3-1600 Hard Drive: Patriot Torqx 2 64GB SSD Component Status: Graphics Card works OOB Audio works (VoodooHDA VT2021) Sleep works (evOreboot) CPU Power Management works OOB Ethernet works (Atheros Ethernet) USB 2.0 works (All) OOB USB 3.0 works OOB (Except lower 4 ports) Shutdown/Reboot Works (evOreboot) iCloud/App Store/FaceTime/iMessage Works Notes: Install F17f BIOS Load Optimized Default Use AHCI instead of IDE Set xHCI Mode to Auto Enable EHCI Hand-off Enable High Precision Event Timer	Install Method: Boot from USB (-x) - install with iGPU Wipe disk as GUID and Mac OS Extended (Journaled) Boot with USB to Drive (-x) still with iGPU Install UserDSDT or DSDT-Free Install, VoodooHDA VT2021, EvOreboot,FakeSMC,FakeSMC Plugins, Chimera v1.11.1 r1394, Sandy Bridge Core i7 SSDT, iMac 13,1 System Definintion, Atheros Ethernet Shut Down Enter BIOS and Disable Integrated GPU and Initialized GPU First to PEG Boot with -v, PCIRootUID=0, GraphicsEnabler=Yes using Graphics Card Goto The "Extra" Folder open org.chameleon.Boot.plist and Add Under Kernal Flags add <string>PCIRootUID=0</string> <string>GraphicsEnabler=Yes</string> Install 10.8.2 Update Through App Store Install AppleACPIPlatform.kext 10.8.1 Reboot
GA-Z77-DS3H rev1.0	Intel® Z77 Express Chipset	System Configuration: CPU: Intel core i5 3470 box GPU: Gigabyte NVIDIA GTX 650 OC RAM: G-Skill 2x8GB 1600Mhz Component Status: All works except sleep Notes: Install method - Mountain Lion.dmg 10.8.2 installed from USB thumb drive	Followed this tutorial [5] for a complete install
GA-Z77-DS3H rev1.1	Intel® Z77 Express Chipset	System Configuration: CPU: Intel core i5 3570k box GPU: EVGA NVIDIA GTX 660 2GB Superclocked (non-Ti) RAM: Corsair 4x4GB Storage: Crucial M4 256GB, Seagate Green 2TB, WD Black 2TB Component Status: Video card Audio USB 3.0 Superspeed Sleep FusionDrive OOB: bootable with Mac OS X 10.8.2 Mountain Lion in USB stick, all working except sound and ethernet - any GTX card needs to be removed when OS X is being installed Notes: Install method - Mountain Lion.dmg 10.8.2 installed from USB thumb drive bootflag [GraphicsEnabler=No] required after GTX graphic card installation Use for Audio & LAN installation: ALC887/888b, Atheros ALXEthernet	Patches: no DSDT, FakeSMC Plugins Shutdown, Restart, Sleep: - any CPU overclocking alteration in BIOS option will disable wakeup onboard NIC, SMC: - USE ALXEthernet 1.0.2 Sound: - ALC 887/888b V100302

Intel

Hardware Name	Chipset	Notes	Patches Used	32/64bit working with patches
Intel DG41RQ	Intel G41 (ICH7)	System configuration: CPU: Intel Core 2 Duo E7500 GPU: nVidia GeForce 210 Silent 1GB HDA: Realtek ALC662 NIC: Realtek RTL8111D BIOS Settings: Load Default settings Boot Device set to Legacy & SATA only Enable UEFI Boot Installation method: Fresh Install of Retail ML 10.8.2 via USB OS X 10.8.2 Supp Update via AppStore Working: Shutdown/Reboot Mac App Store iCloud DVD Player VGA, HDMI, DVI-D Not Working: Sleep/Wakeup	Patched DSDT [6] NullCPUPowerManagement.kext / Add speedstep dsdt patch FakeSMC 4.0 Rev.617 [7] Chimera 1.11.1 Bootloader VoodooHDA 2.7.4 (Two personalities included for on-board audio and HDMI Audio) RTL81xxx 0.0.90
Intel DG41WV (rev. 0007) (rev. 0015)	Intel® G41 Express Chipset/Intel ® ICH7	System Configuration: (rev. 0007) Install method: restore BaseSystem.dmg into a pendrive and install Chimera 11.1.1 r1394. CPU: Intel DualCore E3400 2,60Ghz Memory: Patriot DDR3 800 MHz 2 x 2Gb HDD: WDC 500GB Video: GeForce 8400GS 512Mb DDR2 ID 0x10c3 Audio: Onboard ALC662 via edited VoodooHDA: Link Ethernet: Realtek RTL8111: Link Peripherals: USB Mouse and Keyboard System Configuration: (rev. 0015) CPU: Intel® Core™2 Quad Processor Q8400 Memory: Kingston DDR3 1064 MHz 2 x 2Gb HDD: WDC 500GB Video: GeForce GTX 560 TI TWIN FROZR II 1024Mb GDDR5 ID 0x10de Audio: Onboard ALC662 via edited VoodooHDA: Link Ethernet: Realtek RTL8111: Link Peripherals: USB Mouse and Keyboard	*Install method: Purchase Mountain Lion from the Mac App Store Restore BaseSystem.dmg into a pendrive and install Chimera 11.1.1 r1394 Copy mach_kernel, kernelcache and boot.efi to pendrive's root. Put SMBios iMac9,1, org.chameleon.boot (with EthernetBuiltIn=Yes, GenerateCStates=Yes, GeneratePStates=Yes, GraphicsEnabler=Yes) in /Extra Put FakeSMC in /Extra/Extensions or install it from Chimera Patches: DSDT.aml: Link Bootloader: Chimera v1.11.1 r1394 SMBIOS: iMac9,1 (rev. 0007) - Mac Pro 3.1 (rev. 0015) BIOS settings : Sata Mode to AHCI. Kexts: FakeSMC, AppleHDADisabler, VoodooHDA 0.2.56 (edited) and RealtekRTL81xx. Kernel flags: EthernetBuiltIn=Yes, GenerateCStates=Yes, GeneratePStates=Yes, GraphicsEnabler=Yes). Problems with USB - add USBBusFix flag Works: Everything except Sleep/Wake
Intel DX58SO	Intel® X58 Express Chipset/Intel ® ICH10R	System Configuration: CPU: Intel I7 950 3,07Ghz (stock) Memory: DDR3 1333 MHz 3 x 2Gb HDD: 1000GB Video: Sapphire Radeon 5770 Vapor-x Audio: Onboard ALC889 Ethernet: Realtek Peripherals: USB Mouse and Keyboard Install method: Retail Install from the Mac App Store BootLoader : Chamaleon 2.1 RC5 SMBIOS: MacPro 4.1 Boot Flags: GraphicsEnable=Yes GeneratePStates=Yes GenerateCStates=Yes KernelCache=Yes EthernetBuiltIn=Yes Kexts: S/L/E FakeSMC AppleHDA(patched) Legacy889HDA AppleIntel8256X Functionality: Everything works flawless. Video, Audio, Lan , Firewire, Wifi Shut Down and Restart works with no Kext. Sleep and Wake up works with no Kext. Geekbench: 11.000 aprox. Cinebench: 6 aprox. GPU 37 Fps VIDEO DEMO	Patches: DsdtAutoPatcher link Patches: DTGP, IRQS, SBUS, SHUTDOWN, LPC ICH10, REMOVED DEVICES, MUTE, AHCI ORANGE ICON, AZAL TO HDEF, HDEF, ALC889
Intel DP67DE B3	Intel® P67 Express Chipset	System Configuration: Install method: From USB "Mountain Lion 10.8.2 [Intel]" rutracker 'dot' org/forum/viewtopic.php?t=4121627 CPU: Intel Core i5-2500 3,30 [email protected] 3,90 GHz Memory: Corsair XMS3 DDR3 1000 MHz (XMP 2000) 2 x 2Gb SDD: SSD Corsair F60, 60Gb, SATAII Video: HIS 5850 1024 mb (1080p DVI BenQ G2220HD+1080p HDMI SAMSUNG TV UE40D6500 ) Audio: Onboard ALC892 with VoodooHDA 2.7.3 + Creative Sound Blaster Audigy 2 Value, PCI Ethernet: Intel 82579V 10/100/1000 Wi-Fi: TP-Link TL-WN882ND (rev.1.0) Peripherals: USB Mouse, Keyboard, WebCam Logitech, Line6 UX2 external audio Install method: Boot from USB and install (GUI format metod) First start Booting from USB and drop extra folder into SSD "/", install Chameleon	Patches: Bootloader: Chameleon-2.1svn-r.2050 SMBIOS: iMac12,2 BIOS settings : Sata Mode to AHCI. Kexts: FakeSMC, IOAHCIBlockStorageInjector, NullCPUPowerManagement (Extra folder), AppleIntelE1000e & IO80211Family9287 for Wi-Fi (S/L/E) Kernel flags: GraphicsEnabler=Yes). Works: Restart Shutdown Sleep/Wake don't work
Intel DG43NB	Intel® G43 Express Chipset	System Configuration: Install method: From USB "Mountain Lion 10.8.2 [Intel]" iATKOS ML2 with Chameleon bootloader 2.1 CPU: Intel Pentium Dual-core E6300 2.8Ghz Memory: 2x1GB DDR3-1333 Kingmax dual channel HDD 750GB Seagate Barracuda ES Sata-II running on AHCI Mode (SMART off) Video: Gigabyte GeForce 8400 GS 512 mb (1280x1024 extended desktop on dual Dell 17 monitors) with QE/CI full funtions Audio: Onboard ALC888 with VoodooHDA 2.8.3 new patch for ML2 (on offical site iATKOS) Ethernet: Intel 82567V2 10/100/1000 onboard Peripherals: USB Mouse, PS/2 Keyboard works well ODD: Asus DVD-RW Sata interface works well + LG DVD-RW PATA interface works well All USB 2.0 ports works well Install method: Load BIOS default, AHCI mode with SMART off, XD enabled, S3, Limit CPU off (if CPU limit is on, the OS will recognize CPU is Core 2 Solo and work only 1 core) Boot from USB and install, customizer with nvidia geforce driver 10.8.2 and old graphics card support, AHCI Sata driver enabled, AHCI-ATA enabled, USB, Sound, Wired ethernet Works: Graphics full funtion with app (Final cut, adobe master collection...) Restart Shutdown Sleep/Wake work very well
Intel DG31PR	Intel G31 Express	System configuration: CPU: Intel Core 2 Quad Q6600 GPU: XFX GeForce 8600 GT 540M 512MB HDA: ALC888 NIC: Realtek RTL8111-GR MEM: 2x 2 GB Kingston 800MHz DDR2 SDRAM BIOS Settings: Load Default settings Boot Device set to Legacy & Automatic mode off Enable USB Boot Installation method: myHack Install of Retail ML 10.8.0 USB w/extra dsdt & boot.plist and -v flag to get in OS X 10.8.1-2 update chameleon/extra installation Working: Shutdown/Reboot Mac App Store iCloud DVD Player All USB 1 & 2 ports Unknown card reader start reading after usb fix in boot.plist VGA @ 1920x1080 and no extension needed. Audio back and front green plugs. Not Working: Sleep/Wakeup	Patched DSDT for this board from http://www.osx86.net/ or https://www.dropbox.com/s/28b8okjoyndvprf/DG31PR%2010.8.2.zip that is not 0071 and a boot.plist with USBBusFix=Yes is needed for myHack usb extra folder (might need GraphicsEnabler=Yes / EthernetBuiltIn=Yes too) Chameleon 2.2 Bootloader Full audio by Elad Nava ALC888 1.7.9 AppleHDA.kext with no HDAEnabler in System/Extra/Extensions Lnx2Mac RealtekRTL81xx-0_0_90 ethernet installer Same system from 10.8.0 only from 10.8.3 audio gets lost. also 10.6.8 and only empire efi boot cd + 10.6.0 dvd + voodoo hda lets install only sleep is useless

MSI

Hardware Name	Chipset	Notes	Patches Used	32/64bit working with patches
H61M-E33/W8	Intel® H61(B3)	System configuration: CPU: Intel® Core™ i3-3225 Processor (3.30GHz, 3M Cache) GPU: Intel HD 4000 (Integrated) RAM: MicroCenter DDR3 1333MHz 4 GB LAN: Realtek® 8111E BIOS version: 18.2	Installation method: (Copied from entry for Asus P8H61-M LX3 PLUS R2.0 above, with minor changes to configuration) Using iAtkos ML2 from a flash drive: 1. Formatted the flash drive (8 GB) to Mac OS X Extended (Journaled) [used Master Boot Record] 2. Dragged the iAtkos ML2 DMG to Disk Utility, mounted it and restored it to the newly created partition of the flash drive. 3. Ran the Chameleon installer and installed it to the flash drive. 4. Set HDD as AHCI instead of IDE in Advanced Setup in the BIOS (UEFI) and enabled VT-x as well 6. Booted from the flash drive. 7. Formatted a partition as Mac OS X Extended (Journaled) in Disk Utility and selected the following customizations: - Bootloader - Bootloader options: Kernel Cache, Built-in Ethernet (Note: I disabled Graphics Enabler because it wouldn't go past the Apple loading screen. Feel free to experiment.) - Patches: FakeSMC, Disabler, EvoReboot, RTC Patch - Mac model: MacBookPro 9,1 - Drivers: - SATA/IDE: AHCI SATA, AHCI Internal, Non-AHCI SATA - Network - Sound 8. Reboot and you should have everything working. I have an issue that it takes 3-4 minutes for mouse/keyboard because they are generic USB.
MSI Z77MA-G45	MSI Z77MA-G45 Intel Z77 Socket Motherboard Link	System configuration: CPU: Intel Xeon® E3 1240v2 Processor (3.40GHz, 8M Cache) RAM: Corsair DDR3 CL9 1600MHz 16 GB (OSX86 Not picky on brand) LAN: RTL81xx OS X Driver Link WIFI: TL-WDN4800 Link BIOS version: 1.7	Used this install guide install guide What Helped Most with Nvidia GTX 660 (Non-Ti) - see below GraphicsEnabler=No iMac 12,2 in Some cases rm NV* to boot. Install the updated drivers nvidia
Z68A-GD80-G3	Intel Z68	System Configuration Intel Core i7 - 2500k (4.5GHz Detected at 3.3Ghz) GTX570 500 Gb Sata II HD	Installation iAtkos LM2 1. Formatted the flash drive (8 GB) to Mac OS X Extended (Journaled) [used Master Boot Record] 2. Dragged the iAtkos ML2 DMG to Disk Utility, mounted it and restored it to the newly created partition of the flash drive. 3. Ran the Chameleon installer and installed it to the flash drive. 4. Set HDD as AHCI instead of IDE in Advanced Setup in the BIOS (UEFI) and enabled VT-x as well 5. Booted from the flash drive 6. Used Default Settings from ML2 7. Everything just worked: Sound, GTX 570, Ethernet (Have not tried sleep or USB 3.0) Much easier install than on 10.7 or 10.6. (I also have a wifi card that works natively)
B75MA-P45	Intel® B75 Chipset	System Configuration CPU: Intel Pentium G840 RAM: 2x 4 GB DDR3 1333 MHz Graphic: ASUS NVIDIA Geforce 440GT 1GB BIOS: 1.4 LAN: Realtek® 8111E Audio: Realtek® ALC887 HDD: SATA II SAMSUNG Spinpoint F1 HD322HJ 320GB 7200 Drive: SATA II LG GH22NS30	Installation method: Using Niresh ISO Bootable 10.8 1. Booted from the DVD drive. 2. Formatted a partition as Mac OS X Extended (Journaled) in Disk Utility and selected the following customizations: Default and Graphics Enabler=on 2. Reboot after installation 3. Install BugFix from Niresh 4. Install Lnx2Mac and DSDT 5. Update to 10.8.2 via AppStore 6. Install kext to ALC887 (Current) 7. Install new NVIDIA frameworks and kexts 8. Install SleepEnabler.kext LINK 9. Repair permissions and cache Works: Everything working! Sleep fully working!

Graphics Cards

Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.

PCI-E

AMD/ATI

Model	Board-Manufacturer	Notes	QE/CI	Output	Dual display	32/64bit working
Radeon HD 4650	XFX	Add dev ID 0x94981002 to ATI4600Controller.kext Add dev ID 0x94981002 to ATIRadeonX2000.kext GraphicsEnabler=Yes ; AtiConfig=Flycker; AtiPorts=2		HDMI / DVI or VGA (But NO Sound output via HDMI)
Radeon HD 4830	Sapphire	Using QE_CI Exotic patch for HD48xx cards Chameleon 2.0 RC5 or PCEFI 10.6 Lion + Snow GraphicsEnabler=Yes		DVI / DVI	Not tested
Radeon HD 5450 1GB	Sapphire	Add dev ID 0x68E11002 to AMDRadeonAcellerator.kext under "Cedar" IOPCIMatch Chimera v1.11.1 r1394, 10.8.2 build 12C54 GraphicsEnabler=No		Only DVI tested	Not tested
Radeon HD 5450 512MB	HIS	Add dev IDs 0x68E11002 0x68e11002 to AMDRadeonAcellerator.kext under "Cedar" IOPCIMatch Add dev IDs 0x68E11002 0x68e11002 to ATI5000Controller.kext under IOPCIMatch Chameleon 2.1 (svn-r2109) [2012-10-28 21:45:24] GraphicsEnabler=Yes AtiConfig=Shrike (Provides Dual for HDMI + DVI) or use Baboon or Zonalis for dual HDMI + VGA (Elemuer is only valid for single display) AtiPorts=3		HDMI + DVI	Works
Radeon HD 5770 Vapor-X	Sapphire	Works OOB (true 5770, not flashed) Confirmed working in both Lion and Mountain Lion GraphicsEnabler=Yes/No DSDT Edits Needed for HDMI Audio		DVI/DVI/DP/VGA+Adapter	Works w/3 displays
Radeon HD 5770	Sapphire	Flashed HD 6770 into HD 5770 Works OOB Chameleon 2.0 RC5 or PCEFI 10.6 Lion + Snow GraphicsEnabler=Yes/No works with both		DVI/HDMI/VGA	Not tested
Radeon HD 5850	Sapphire	Using this guide to get rid of the ghost monitor issue GraphicsEnabler=Yes since 10.8.2 sleep mode isn't working with this card, if you pick an older kext (10.8.1 or 10.8) it's still working fine		DVI / DisplayPort (HDMI, VGA with adapter not tested)	HDMI+DVI
Radeon HD 6450	XFX/Sapphire/MSI	GraphicsEnabler=Yes AtiConfig=Pithecia Works OOB Using Pithecia FB Patch		DVI / HDMI / VGA
Radeon HD 6570	MSI/Sapphire	Works OOB		DVI/VGA/HDMI all work
Radeon HD 6570 2GB Memory Bus 128 Bit	Gigabyte GV-R657D3-2GI - Link	GraphicsEnabler=Yes AtiConfig=Bulrushes AtiPorts=3 smbios.plist iMac 11,1 (No lag after wake up from sleep with this) Sleep works Chameleon 2.1 (svn-r2181) Shown as AMD Radeon HD 6570/7570 Series 2048 MB in System Profiler		1xDVI / 1xHDMI / 1xVGA
Radeon HD 6770	Sapphire	Using DSDT Inject method Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow GraphicsEnabler => No more need!!!		DVI / HDMI / VGA	Not tested
Radeon HD 6770 1GB DDR5 silent	Gigabyte	Chameleon 2.2 r2189 with GraphicsEnabler=Yes, no ATIports or ATIconfig needed ATI5000controller.kext, ATI6000controller.kext, AMDRADEONAccelerator.kext edited with device ID - 68BA1002 Beware in ATIXXXXcontroller to edit under AMDJUNIPER.... Edited ApplePowerManagement.kext, but don't know if used, idle GPU temp=43° macpro4,1 SMBios Latest FakeSMC (5,0,2,0), display GPU temp with hwmonitor Sleep OK, OPENGL 36fps cinebench, Unigine 3.0 24 fps med, mercury engine OK in premiere CS6 with tweak Mac OpenGL better results than in Windows in Unigine 3.0, but DirectX11 faster overall no firmware flash, very stable, very satisfied for 100e second hand silent version, no fan		Only Displayport tested, but 4 ports detected	Not tested
Radeon HD 6670 1GB	Sapphire	GraphicsEnabler=Yes AtiConfig=Pithecia AtiPorts=3 Everything works using this tutorial Link		DVI / HDMI / VGA
Radeon HD 6870 1GB	VTX 3D VX6870 1GBD5-M2DHV2	GraphicsEnabler=Yes AtiConfig=Duckweed AtiPorts=5		2xDVI / HDMI / 2xminiDP
Radeon HD 7970 Lightning 3GB	MSI	GraphicsEnabler=No DSDT Inject needed FB= Futomaki or Aji more info here : http://rampagedev.wordpress.com/2012/12/04/about-amd-7970-working-with-full-qe/ You need sleep working in your system ( you need sleep and awake your system at login screen )		2xDVI / 4xminiDP	2 miniDP to DVI tested and works

NVIDIA

Model	Board-Manufacturer	Notes	QE/CI	Output	Dual display	32/64bit working
NVIDIA Geforce 8400 GS	Geforce 8400GS 512MB DDR2 ID 0x10c3	Working OOB with current version of Chameleon GraphicsEnabler = Yes		VGA / DVI / HDMI	VGA +/& DVI HDMI
NVIDIA Geforce 8500 GT	Gigabyte Geforce 8500GT 256MB DDR2	Working OOB GraphicsEnabler = Yes		VGA / DVI	Not tested	Not tested
8600 GT	NVidia 512MB	Working OOB GraphicsEnabler = Yes under kernel Flags in com.apple.boot.plist		VGA / DVI (not tested)	Not tested
NVIDIA Geforce 8800 GTS 512MB (G92) GDDR3	ASUS EN8800GTS 512 ZOTAC 8800 GTS 512 MB	Working OOB with original included kext (NVDANV50HAL.kext) g92enabler.pkg GraphicsEnabler=Yes		DVI/DVI	DVI / DVI
NVIDIA Geforce 9500 GT	Inno3d Geforce 9500 GT 1 GB DDR2	Working OOB NVEnabler 64.kext and CUDA.kext		VGA / DVI / HDMI	Tested with DVI (VGA to DVI) and HDMI (DVI to HDMI)
nVidia GeForce 9600 GT	ECS Elitegroup nVidia GeForce 9600GT 2GB	Working OOB		DVI / DVI / HDMI (via DVI>HDMI adapter)	Not Tested
Geforce 9600	Zotac Geforce 9800 GT 512 MB	Working OOB		DVI / D-SUB / HDMI	Not tested
Geforce 9800	Leadtek Geforce 9800 GT 512 MB Green Edition	Working OOB		DVI / D-SUB / HDMI	Not tested
Geforce 9800 GT	Gygabyte GV-N98TOC-1GI v2.0 1024 Mb DDR3 256 bit	Working OOB with current version of Chameleon GraphicsEnabler = Yes		DVI / D-SUB / HDMI / SPDIF	VGA +/& DVI HDMI SPDIF
NVIDIA GF 210 S	CLUB 3D 1024 MB DDR3 DeviceID: 0x0a65 Revision: 0x00a2 ROM: 70.18.82.00.1B	Working OOB GraphicsEnabler = Yes		VGA / DVI / HDMI	VGA +/& DVI HDMI
NVIDIA GeForce 210	ASUS EN210 SILENT/DI/1GD3(LP) 1GB DDR3, fanless	Working OOB GraphicsEnabler = Yes Bootflag: PCIRootUID=0		VGA / DVI / HDMI	DVI + HDMI (VGA not tested)
NVIDIA GeForce 210	Zotac Geforce 210 Synergy Edition 1GB DDR3 (ZT-20308-10H), fanless	Working OOB GraphicsEnabler = Yes		VGA / DVI / HDMI	HDMI only tested
NVIDIA GT 430	PNY GT 430 1024MB DDR3 PCI Express® 2.0 Model : VCGGT4301XPB	Working OOB GraphicsEnabler = Yes Nvidia Cuda Drivers for Mac From nvidia.com		DVI (Not Tested) / VGA / HDMI
GT 520	Nvidia GeForce GT 520 1GB	Working OOB GraphicsEnabler = No/Yes (Both Works!) Nvidia Cuda Drivers for Mac From nvidia.com OpenCL works with patch		VGA / DVI
NVIDIA GTX 550 Ti	EVGA 01G-P3-1556-KR NVIDIA GeForce GTX 550 Ti 1024MB GDDR5	NOT Working OOB (Can get to run, but system will be very unstable) GraphicsEnabler = Yes		VGA / DVI / HDMI	VGA +/& DVI HDMI
NVIDIA GTX 560 (non TI)	Gigabyte GTX 560 1024 MB GDDR5 Model: GV-N56GOC-1GI	Working OOB GraphicsEnabler = Yes 10.8.0 OpenCL Enabler Nvidia GTX470 /480 /560TI /570/580 Nvidia Cuda Drivers for Mac From nvidia.com		DVI / DVI / HDMI	Not tested
NVIDIA GTX 570	Gigabyte 1280MB GDDR5 (standard clocks)	Worked OOB but installed NVIDIA Retail 304.000.00f20 OpenCL Patch		VGA/DVI/HDMI	DVI/DVI
NVIDIA GTX 660	Inno3D GTX 660 2048 MB GDDR5	If you want to use GTX 660 Display card,install display driver "http://www.nvidia.com/object/macosx-304.00.05f02-driver.html" GraphicsEnabler = No Nvidia Cuda Drivers for Mac From nvidia.com		DVI / DVI / HDMI	Not tested
NVIDIA GTX 560 (non TI)	Zotac GTX 560 1024 MB GDDR5 Model: ZT-50701-10M	Working OOB GraphicsEnabler = Yes Nvidia Cuda Drivers for Mac From nvidia.com		DVI / DVI / HDMI / VGA (DVI To VGA Adapter) / VGA (DVI To VGA Adapter) / Display Port (Not Tested)
NVIDIA GTX 560 (TI)	MSI GTX 560ti 1024 MB GDDR5 Model: N560GTX-Ti Twin Frozr II/OC	Working OOB GraphicsEnabler = Yes Nvidia Cuda Drivers for Mac From nvidia.com		VGA (DVI To VGA Adapter) / Display Port (Not Tested)
NVIDIA GTX 560 (TI)	EVGA GTX 560ti 1024 MB GDDR5 Model: 01G-P3-1563-KR	NOT Working OOB. Use integrated gfx and edit your boot.plist with: GraphicsEnabler=Yes Setup predefined resolution: 1920x180x32 Recognized after setup and works. All 3 ports Setup Using Vanilla 10.8.2 Retail Update/Combo Update Unknown		DVI/DVI2/HDMI Tested
NVIDIA GTX 680	GTX 680 2048 MB GDDR5	Working OOB GraphicsEnabler = No Nvidia Cuda Drivers for Mac From nvidia.com		DVI / DVI / HDMI/DP	Not tested
NVIDIA GeForce GT 640M	OEM 640m 2048gb GDDR5	Working OOB		DVI / HDMI	No
NVIDIA GTX 660 (Non Ti)	EVGA NVIDIA GeForce GTX 660 2048MB GDDR5	Working OOB GraphicsEnabler = No Nvidia Drivers for Mac nvidia.com		VGA / DVI / HDMI	VGA / DVI HDMI
NVIDIA GTX 660 (Non Ti)	MSI GeForce GTX 660 TwinFrozr III 2GB GDDR5 OC Edition	Working OOB GraphicsEnabler = No Nvidia Drivers for Mac nvidia.com		VGA / DVI / HDMI	VGA / DVI HDMI
NVIDIA GeForce GTX 650	Gigabyte GV-N650OC-1GB GDDR5	Working OOB GraphicsEnabler = No Nvidia CUDA Drivers for Mac (working good on native ML driver too)		2xDVI / HDMI / D-Sub	Not tested
NVIDIA GeForce GTX 660Ti	MSI 2GB DDR5 Power Edition	Working OOB GraphicsEnabler = No		2xDVI / 2xHDMI
NVIDIA GeForce 285	EVGA Geforce GTX 285 SSC 1GB DDR3	Required flags for the installation process and first boot PCIRootUID=0 npci=x3000 darkwake=0 GraphicsEnabler=Yes		DVI / DVI	Not tested
GT 610	ASUS GeForce GT 610 1GB DDR3	Working OOB GraphicsEnabler=No		HDMI /DVI / D-SUB	No Tested
GT 620	NVIDIA GeForce GT 620 1GB DDR3	Required flags at first boot -x In safe mode install NVIDIA GeForce and Quadro kexts		HDMI /DVI / D-SUB	No Tested
NVIDIA Geforce 630GT	EVGA Geforce 630GT 2GB DDR3	Working OOB GraphicsEnabler=Yes PCRootUID=1		VGA / DVI / HDMI	VGA +/& DVI HDMI
NVIDIA Geforce GTX 560 TI	Gainward GTX 560 Ti Phantom (1GB)	NOT Working OOB GraphicsEnabler=No (Otherwise restart-loop) Install NATIT (FullHD 2 Dualscreen etc..., detects 2GB)		VGA / DVI / HDMI	VGA + HDMI

INTEGRATED

Model	Board-Manufacturer	Notes	QE/CI	Output	Dual display	Compatible 64bit
GMA X4500	Intel	Not working		VGA / DVI	Not tested
GMA X3100	Intel	GMA X3100 working in 64.bit mode , GraphicsEnabler = No, no mouse lag. download kext from http://www.osx86.net/view/1148-x3100_64bit_driver_for_snow_and_lion.html		VGA /DVI	YES
HD4000	Intel	Working with Chimera 1.11.1 bootloader only when using dual display , before booting unplug hdmi cable or else it doesnt work.		DVI / HDMI	Yes - DVI/HDMI

Network Cards

Wireless

Interface	Standard	Device	Manufacturer	Chipset	Notes	32/64bit working with patch
USB	802.11 n/g/b	Digitus Wireless 300n DN-7053-2 300 Mbps, Mini	Digitus	RTL8191SU	Used 10.8. Realtek Chipset Driver
USB	802.11 n/g/b	Netgear WNA1000M 150 Mbps, Mini	Netgear	RTL8188CUS	Used 10.8. Realtek Chipset Driver
USB	802.11 n/g/b	Hama WLAN-USB-Stick 150 Mbps, Mini	Hama	RT2870	Used this driver
USB	802.11 n/g/b	Hama WLAN-USB-Stick 300	Hama	RT3070?	Used Hama Driver
USB	802.11 n/g/b	MSI US300EX Lite USB Adapter WLAN 802.11.n Ralink USB 2.1	MSI	RT3070	Download driver here
USB	802.11 n/g/b	D-Link DWA-125 N150	D-Link	RT3070	Download driver here - perfect signal
USB	802.11 b/g/n	ALFA AWUS036NEH	ALFA Network	RT3070	Download driver here
PCI Express	802.11 b/g/n	PCI Express Wireless Ethernet	D-LINK DWA-556	Atheros	Working OOB
PCI Express	802.11 b/g/n	PCI Express Wireless Ethernet	D-LINK DWA-547	Atheros	Working OOB
USB	802.11 b/g/n	WL-344	Sitecom	Ralink	Workiing with OEM driver
USB	802.11 b/g/n	EM 4544	Eminent	Ralink	Workiing with OEM driver
PCI Express	802.11 a/b/g/n	PCI Express Wireless Ethernet	TL-WDN4800	Atheros 9380	Working OOB. Seen like a real AirPort Extreme
PCI Express	802.11 b/g/n	RNX-150PCe	Rosewill	Atheros 9285	Requires patched IO80211Family.kext here
PCI Express	802.11 a/b/g/n	PCI Express Wireless Ethernet	Rosewill N900PCE	Atheros 9380	Working OOB. Seen like a real AirPort Extreme
PCI Express	802.11 a/b/g/n	PCI Express Wireless Ethernet	Netgear WN311B	Broadcom BCM4321	Working like a real WiFi AirPort
mini PCIe	802.11 b/g/n	AR5B91	Atheros	AR9281	Working OOB. Seen as Airport Extreme
mini PCIe	802.11 b/g	Dell DW1390	Broadcom-based	BCM4311	Working OOB. Seen as 3rd party card.
mini PCIe	802.11 a/b/g	Dell DW1490	Broadcom-based	BCM4311	Working OOB. Seen as 3rd party card.
mini PCIe	802.11 b/g	Dell DW1395	Broadcom-based	BCM4312	Working with patched BCM43xxxFamily kext. Seen as 3rd party card.
1/2 mini PCIe	802.11 b/g	Dell DW1397	Broadcom-based	BCM4312	Working with patched BCM43xxxFamily kext. Seen as 3rd party card.
USB	8021.11a/b/g/n	W522U	Tenda	Ralink RT3572	PCI device:0x3572 vendor id:0x148f. Use driver for Ralink USB 3x7x provided at [8]. Use Ralink wireless utility to configure. Seen as "802.11n WLAN" USB device, not as Airport device.

Wired (Ethernet)

Interface	Standard	Device	Manufacturer	Chipset	Notes	32/64bit working with patch
PCI Express	10/100/1000 Mbps RJ-45 Gigabit Ethernet	Gigabit Ethernet Card	Planet ENW-9700	Marvell 88E8053	Working OOB
Integrated	Gigabit Ethernet	Gigabit Ethernet Card	Intel	-	Download
Integrated	Gigabit Ethernet	Intel 82566DC	Intel	-	Works with Kext
PCI Express	Dual Port Gigabit Ethernet	Gigabit Ethernet Card	HP NC360T	Intel 82571EB	Working OOB incl. WOL, WOD.

Sound Cards

Interface	Hardware Name	Manufacturer	Notes	32/64bit working with patch
Firewire	FA 101	Edirol	Working OOB
Integrated	ALC887	Realtek	Working with Kext.
Integrated	ALC888	Realtek	Works with Kext
USB	Aureon Dual USB	Terratec	Genuine PnP works OOB
USB	Behringer UCA-202	USB DAC	OOB in each OS-X from 10.6.x to current
USB wireless headset	HS-1200 Digital Wireless	Philips	Genuine PnP works OOB
USB speaker set	M1 Active 520 USB near-field monitor speakers	Alesis	Genuine PnP works OOB
USB	E10 (DAC)	FiiO	Genuine PnP works OOB
USB	DELOCK USB 7.1	DELOCK	Genuine PnP works OOB
PCI	Audigy2 ZS Platinum	Creative	Works with the kX driver. Also more stable if in bios enabled 'old oprom for pci'
USB	Scarlet 2i4	Focusrite	Works OOB with ASUS P5B mobo. If you experience any errors try class compliant mode (script downloadable from Focusrite website)

Webcams

Interface	Item Description	Manufacturer	Notes	32/64bit working
USB	HP Webcam HD-3110	Hewlett Packard	Working OOB.
USB	HP Webcam HD-4310	Hewlett Packard	Working OOB.
USB	Hercules HD Twist	Guillemot Corporation	Working OOB.
USB	SPC 1330 NC	Philips	Genuine PnP works OOB.
USB	Microsoft Lifecam Studio	Microsoft	Working OOB.
USB	A4tech all new models in 16mpix	A4tech	works OOB.
USB	Logitech HD C910	Logitech	Works OOB.
USB	Logitech B500	Logitech	Works OOB.
USB	Logitech C210	Logitech	Working OOB.
USB	Logitech C270 HD	Logitech	Working OOB.

Bluetooth

Type of Accessory	Item Description	Manufacturer	Notes	32/64bit working
Bluetooth USB V2.0	V 2.0 CBTU2A	Conceptronic	Tested with Wireless Apple keyboard, Apple Magic Mouse and a bluteooth headset
Bluetooth USB Adapter	Nano Bluetooth USB Adapter, version 2.1+EDR class2, Link	Hama	OOB. Tested with Apple Magic Mouse
Bluetooth USB Adapter	Belkin F8T016 Mini Bluetooth Adapter	Belkin	Working OOB. Tested with Apple Magic Mouse
Bluetooth USB Adapter	Bluetooth 2.1 USB Micro Adapter	IOGear	Working OOB. Tested with Apple Magic Trackpad
Bluetooth USB Adapter	BT007X	bluetake	Tested with Wireless Apple keyboard, Apple Magic Mouse. Sleep/Wake don't work.
Bluetooth USB V2.0	BTD-MINI2 v.2.1, Class I	Gembird	Tested with Wireless Apple keyboard, Apple Magic Mouse. Sleep/Wake work good, but not from mouse/keyboard.
Bluetooth USB V2.0	BT211 Bluetooth v2.1 + EDR	Asus	Don't work.
Bluetooth USB 1.1	DBT-120 Rev. B4 v.1.1, Class I	D-Link	Working OOB. Tested with Mighty Mouse. Sleep/Wake works perfect. Says Manufacturer: Cambridge Silicon Radio.
Bluetooth USB V2.0	Adapter USB 2.0 to Bluetooth V2.1 EDR Nano, Class 2 Chipset CSR - Link	LogiLink®	Working OOB.
Bluetooth USB V2.0	ES-M03	ESPADA	Wireless Apple keyboard every time lost connection, print with very high delays, Apple Magic Mouse often lost connection, but work more stable than keyboard. Work is not stable.
Bluetooth USB adapter	Btoes 2.0 XMicro	MSI	Works out of the box. File transfer with Android phone and notebook computer works flawlessly. I have not tested keyboard or mouse.

USB 3.0 Cards / Adapters

Type of Accessory	Item Description	Manufacturer	Notes	32/64bit working
PCIe 1x 4 port USB 3.0	4 Port PCI Express Card with SATA Power connector	StarTech.com	USB Super-Speed Bus Working with MacPro3,1 (real Mac) Using LaCie modded KEXT (PHXCD.kext) Version 1.0.10 Card uses TI-7340 chipset