Editing HCL 10.9.2

Jump to: navigation, search

Warning: You are not logged in.

Your IP address will be recorded in this page's edit history.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 243: Line 243:
 
|'''System Configuration:'''
 
|'''System Configuration:'''
 
*CPU: Intel Core i7 920 @ 3.76 GHz  
 
*CPU: Intel Core i7 920 @ 3.76 GHz  
*RAM: 6 x 4 GB. Corsair 1600
 
 
*GFX: 2 x EVGA GTX 660 Ti FTW Sig2 2GB
 
*GFX: 2 x EVGA GTX 660 Ti FTW Sig2 2GB
 
*ETH: Marvel Yukon Gigabit 88E8056x2
 
*ETH: Marvel Yukon Gigabit 88E8056x2
 
*Audio: AD2000b
 
*Audio: AD2000b
*HD: 2x 500GB 10k-rpm - scratch, 2x 250GB Evo SSD's - boot, RAID0 arrays  w/RocketRAID 640L Controller
+
*HD: WD Raptors 2 x 500GB 2x 250GB SSD Raid0 arrays  w/RocketRAID 640L Controller
 
'''BIOS Settings:'''
 
'''BIOS Settings:'''
 
* AHCI
 
* AHCI
 
'''Installation:'''
 
'''Installation:'''
*Install the OS, I put the OS on a single disk and [http://www.bombich.com/ CCC] onto the RAID 0. but boot up the installer, 1 partition, guid the usual, finish install, update. use the extra folder from the root of the usb installer, drop it to the root of your hard drive. install kexts in Patched-12D78.zip from Resources Post install with KextWizard to S/L/E. Drop your CPU specific DSDT from Resource post into the root of your Extra folder. Install Chameleon to the boot drive, Repair Permissions & Rebuild Cache on both Extra & S/L/E. Install Web Drivers for CUDA / OpenGL. For bootable RAID 0 follow directions in link Bootable RAID 0.
+
*Install the OS, I put the OS on a single disk and [http://www.bombich.com/ CCC] onto the RAID 0. but boot up the installer, 1 partition, guid the usual, finish install, update. use the extra folder from the root of the usb installer, drop it to the root of your hard drive. install kexts in Patched-12D78.zip from Resources Post intall with KextWizard to S/L/E. Drop your specific DSDT from Resource post into the root of your Extra folder. Install Chameleon to the ML drive, Repair Permissions & Rebuild Cache on both Extra & S/L/E. Install Web Drivers for CUDA / OpenGL. For bootable RAID 0 follow directions in link Bootable RAID 0.
 
'''System Status:'''
 
'''System Status:'''
 
* All: Fully working {{Y}}
 
* All: Fully working {{Y}}

Please note that all contributions to OSx86 may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see OSx86:Copyrights for details). Do not submit copyrighted work without permission!

Cancel | Editing help (opens in new window)
Powered by MediaWiki © 2021 OSx86 Project  |   InsanelyMac  |   Forum  |   OSx86 Wiki   |   Privacy policy   |   About OSx86   |   Disclaimers