Editing HCL 10.9.3

{{Hardware_Components|10.9.3}}
{{Note|For suggestions about table headings, please join the [http://wiki.osx86project.org/wiki/index.php/Help_talk:Contents discussion here].}}
==Motherboards==
=== Abit ===
{| class="wikitable" width=100%
!Hardware Name
!Chipset
!Notes
!Patches Used
!colspan=2| Compatible 64bit
|-
|}

=== Alienware ===
{| class="wikitable" width=100%
!Hardware Name
!Chipset
!Notes
!Patches Used
!colspan=2| Compatible 64bit
|-
|}

=== Asrock ===
{| class="wikitable" width=100%
!Hardware Name
!Chipset
!Notes
!Patches Used
!colspan=2| Compatible 64bit
|-
|B85M-Pro4
|Intel B85
|'''System Configuration:'''
* CPU: Core i3 4130
* GPU: Saphire HD5450 512MB

'''Bios settings'''
* Version: 1.90
* Virtualization disabled
* primary graphics: pci-e
* legacy mode

'''Installation:'''
* AppStore Mavericks app (10.9.3)
* SMBios: iMac14,2
* USB created myHack 3.3.1 (no MBR patch)
* patched [http://www.insanelymac.com/forum/topic/293503-haswell-early-reboot-mavericks-locked-msrs-and-hp-envy-15-j063cl-i7-4700mq/ mach_kernel]

'''System Status:'''
* AMD Graphics: QE, full 3D acceleration {{Y}}
* Intel IGP Graphics {{N}} - not tested!
* Audio {{Y}}
* Ethernet {{Y}}
* USB 3.0 {{Y}}
* Sleep, Shutdown, Restart {{Y}}

|'''Post-installation:'''
* Kernel -> directly after installation replace mach_kernel
(HDD) with patched kernel (MyHack USB) through Terminal.app
* Audio -> [http://www.insanelymac.com/forum/topic/293001-mavericks-realtek-alc-applehda-audio/ ALC892]
* Network -> [http://sourceforge.net/projects/osx86drivers/files/Kext/Snow_or_Above/ Intel I217v - AppleIntelE1000e.kext]
* patch Device ID (0x68f91002) in AMD5000Controller and ATIRadeonX3000.

'''Chameleon Boot Flags:'''
* GraphicsEnabler=No

''' Extra / Extensions:'''
* AppleIntelE1000e.kext
* FakeSMC.kext
* lspcidrv.kext
* Patched_10.7_AppleRTC.kext
|{{Y}}
|-
|-
|[http://www.asrock.com/mb/Intel/Z77%20Pro4/ Z77 Pro-4]  
|Intel Z77
|'''System Configuration:'''
*CPU: Intel Core i5 3550 Ivy bridge with oc @ 4100 Mhz (3300 mhz stock freq.)
*RAM: 1x4GB Kingston 1333 MHz overklocked @ 1800 mhz
*VGA: ASUS GeForce® 210 EN210 SILENT/DI/1GD3/V2(LP)
*ETH: 1x Realtek RTL8111E gigabit lan
*WIFI: Icidu 150N pci-e card, with atheros ar9285 chip
*SND: Onboard ALC892

'''System Status:'''
*All of the above components: {{Y}}
*Reboot, Shutdown: {{Y}}
* Sleep: Works: {{Y}}
|'''Installation method: Pendrive with Mavericks downloaded from App Store and Niresh.co extra's'''
* Boot flags: ncpi=0x3000 GraphicsEnabler=Yes UseKernelCache=Yes
* VT-d disabled, Sata on AHCI mode
* Graphics - Worked OOB {{Y}}
* Network - Worked OOB {{Y}}
* WIFI - Works when using [http://forum.osxlatitude.com/index.php?/topic/5690-atheros-ar9285-for-os-x-mavericks/ this kext] {{Y}}
*USB - Worked OOB {{Y}}
*USB 3.0 - Worked OOB {{Y}}
*SATA - Worked OOB {{Y}}
*App Store - Worked OOB {{Y}}
*Sound - Works when using VoodooHDA kext {{Y}}
*Kernel - Vanilla Mach_kernel {{Y}}
|{{Y}}
|}

=== Asus ===
{| class="wikitable" width=100%
!Hardware Name
!Chipset
!Notes
!Patches Used
!colspan=2| Compatible 64bit
|-
|M5A78L-M LX3
|AMD 760(780L)/SB710
|'''System Configuration:'''
* CPU: AMD FX-6100 @3.3 Ghz
* GPU: Nvidia GeForce G210
* RAM: 2x4GB 1600Mhz
* HDD: Seagate Barracuda 1Tb


'''Bios settings:'''
* AHCI
* Suspend Mode S3


'''Installation:'''
* AppStore Mavericks app (10.9.3) update from 10.9.2 
 

'''System Status:'''
* Graphics: QE, full 3D acceleration DVI VGA {{Y}} 
* Audio -> USB Hercules Djconsole 4-MxEthernet {{Y}}
* TimeMachine, App Store {{Y}} 
* Sleep, Wakeup, Poweroff {{Y}}
|'''Post-installation:'''
* Kernel and kexts -> [http://www.osx86.net/files/file/4033-amd-kernel-for-mavericks-109109110921093/ AMD Kernel Mavericks 10.9.3 ]
* Network -> Qualcomm Atheros 8161Gb LAN Kext
|{{Y}}
|-
|P9X79 LE
|X79
|'''System Configuration:'''
* CPU: Intel i7 3820 @ 3.6GHz
* GPU: Asus 650 Ti 1024Mb
* RAM: 32Gb Corsair XMS3
* HDD: SSD 64Gb


'''Installation:'''
* AppStore Mavericks app (10.9.3) update from 10.9.2 
 

'''System Status:'''
* Graphics: Native, works fine {{Y}} 
* Audio: ALC892 (patched) {{Y}}
* TimeMachine, App Store, iMessage, Facetime {{Y}} 
* Sleep, Wakeup, Poweroff {{Y}}
* USB 3.0 {{Y}}
|'''Post-installation:'''
* Realtek kext 
* ALC892 + HDAEnabler1 + Applications/Utilities/Audio Midi Setup - change the Frequency from 44100hz to 48000hz
|{{Y}}
|-
|[http://www.asus.com/Motherboards/P5W_DH_Deluxe/ P5W DH Deluxe]
|Intel 975X
|'''System Configuration:'''
*CPU: Intel® Pentium® Processor E5300 (2M Cache, 2.60 GHz, 800 MHz FSB) (Overclock 3.48 GHz BUS 266x13 1066 MHz FSB)
*GPU: SAPPHIRE HD 5770 1024MB DDR5 PCIE http://www.sapphiretech.com/presentation/product/product_index.aspx?pid=341&lid=1 (I'm using it with Dual Displays Full HD)
*RAM: Slot 2x1GB DDR2 OCZ Platinum rev2 800Mhz 4-4-4-12 2,1v
*Dual Gigabit LAN Marvell Yukon 88E8053 Gigabit Ethernet Adapter Enabled Natively
*Keyboard: Apple Wired aluminum keyboard USB
*Mouse: Logitech MX™ Revolution Cordless Laser Mouse
'''System Status:'''
*All Works, Sleep, Wakeup, Shutdown, Restart, Updates and app Through MacAppStore
*SAPPHIRE HD 5770 1024 MB (Install kext PIEROF81Inject.kext Edited by me) Full Works + Dual DVI_HDMI_Display Port Yes
|'''Patches:'''
*Chameleon-2.2svn-r2246.pkg
*Kexts (FakeSMC,NullCPUPowerManagement,HDAEnabler+AppleHDA for Realtek ALC full sound of 882m, ICH7_Jmicron363 (Edited by me) for the correct information on System Profiler)
*DSDT For HDMI/DisplayPort Sound Sapphire HD 5770 and AppleHPET Fix to Firewire 400, USB 2.0
*Original Bios v.3001
|{{Y}}
|-

=== Biostar ===
{| class="wikitable" width=100%
!Hardware Name 
!Chipset 
!Notes
!Patches Used
!colspan=2| Compatible 64bit
|- 
|}

=== EVGA ===
{| class="wikitable" width=100%
!Hardware Name 
!Chipset 
!Notes  
!Patches Used
!colspan=2| Compatible 64bit
|-
|}

=== Foxconn ===
{| class="wikitable" width=100%
!Hardware Name 
!Chipset 
!Notes
!Patches Used
!colspan=2| Compatible 64bit
|-
|}

=== Gigabyte ===
{| class="wikitable" width=100%
!Hardware Name 
!Chipset 
!Notes  
!Patches Used
!colspan=2| Compatible 64bit
|-
|GA-Z97X-Gaming GT
|Intel® Z97 Chipset
|
'''System Configuration:'''
*CPU: Intel Core i7 4770k @3.9 GHz
*GPU: internal Intel HD4600 + Nvidia EVGA GTX760 ACX 4GB GDDR5
*RAM: Kingston Hyper RAM 2x8GB 2400 Mhz
'''Component Status:'''
*Graphics: Nvidia EVGA GTX760 QE, full 3D acceleration DVI HDMI Dual Monitors{{Y}} 
*Ethernet: Qualcomm® Atheros Killer E2201 LAN chip (10/100/1000 Mbit) {{N}} 
*Audio:  R[http://www.insanelymac.com/forum/files/download/143-applehda-for-alc1150-1093/ ealtek® ALC1150 codec]  {{Y}} 
*USB 3.0 {{Y}} 
*Bluetooth {{N}} 
* TimeMachine, App Store, iMessage, Facetime {{Y}} 
*Sleep, Wakeup, Poweroff {{Y}} 
|
'''BIOS changes:'''
*Sata mode is AHCI
*Vt-D is disabled
'''Installation Method:'''
*tonymacx86
*DSDT Free 
*GraphicsEnabler "No"
*GeneratePStates "Yes"
*GenerateCStates "Yes"
*HDAEnabler "Yes"
*IGPEnabler "Yes"
*HDEFLayoutID "01000000"
'''Post-Installation:'''
*Audio:  R[http://www.insanelymac.com/forum/files/download/143-applehda-for-alc1150-1093/ ealtek® ALC1150 codec]  {{Y}} 
|{{Y}}
|-
|GA-Z97M-D3H
|Intel® Z97 Chipset
|
'''System Configuration:'''
*CPU: Intel Core i5 4570 @3.4 GHz
*GPU: internal Intel HD4600 + Nvidia EVGA GTX760 ACX 2GB GDDR5
*RAM: 4x4GB 1600Mhz
*HDD: Samsung 840 EVO 120GB SSD + 2 x Western Digital Caviar 2Tb
'''Component Status:'''
*Graphics: Nvidia EVGA GTX760 QE, full 3D acceleration DVI HDMI Dual Monitors{{Y}} 
*Ethernet {{Y}} 
*Audio: ALC892 {{Y}} 
*USB 3.0 {{Y}} 
* TimeMachine, App Store, iMessage, Facetime {{Y}} 
*Sleep, Wakeup, Poweroff {{Y}} 
|
'''BIOS changes:'''
*Sata mode is AHCI
*Vt-D is disabled
'''Installation Method:'''
*tonymacx86
Post-Installation:
*DSDT Free + TRIM 
|{{Y}}
|-
|GA-Z97M-D3H
|Intel® Z97 Chipset
|
'''System Configuration:'''
*CPU: Intel Xeon 1231v3
*GPU: HIS Radeon R9 270X
*RAM: 2x4GB 2000Mhz
*HDD: Samsung 840 EVO 120GB SSD 
'''Component Status:'''
*Graphics: HIS Radeon R9 270X (OOB) QE, full 3D acceleration DVI HDMI Dual Monitors{{Y}} 
*Ethernet {{Y}} 
*Audio: ALC892 {{Y}} 
*USB 3.0 {{Y}} 
* TimeMachine, App Store, iMessage, Facetime {{Y}} 
*Sleep, Wakeup, Poweroff {{Y}} 
|
'''BIOS changes:'''
*Sata mode is AHCI
*Vt-D is disabled
'''Installation Method:'''
*tonymacx86
Post-Installation:
*DSDT Free + TRIM + Sound Patch
|{{Y}}
|-
|GA-Z87N-WIFI (rev. 2.0)
|Intel® Z87 Chipset
|
'''System Configuration:'''
*CPU: Intel Core i7 4770K @ 3.5 GHz
*GPU: Integrated Intel HD4600 + nVidia EVGA GTX750 Ti SSC 1GB GDDR5
*RAM: 2 x 8GB Crucial 1.35V DDR3 1600MHz (BLS8G3D1609ES2LX0)
*HDD: Samsung 830 256GB SSD + Western Digital Green 3TB
'''Component Status:'''
*Graphics:
**Intel HD4600: Disabled, untested.
**nVidia GTX 650 Ti: 3 monitors (2560x1440 via DVI-DL, 1920x1200 via DVI, 1920x1200 via mini-HDMI). {{Y}}
*Ethernet:
** Intel I217-V GbE (LAN1) Works. {{Y}}
** Atheros GbE (LAN2): Disabled, untested.
*Audio:
**ALC892: Disabled, untested.
**Fiio E17 USB DAC working. {{Y}}
*USB 3.0: Working. {{Y}}
*Time Machine: Working. {{Y}}
*App Store: Working. {{Y}}
*iMessage / Facetime: Untested. 
|
'''BIOS changes:'''
*SATA mode: AHCI
*VT-x: Enabled - VT-d is not supported on i7 4770K.
*XHCI: Auto
*XHCI / EHCI Handoff: Enabled
'''Installation Method:'''
*Clover using FakeSMC.kext, AppleIntelE1000e.kext, GenericUSBXHCI.kext, and config.plist with following main parameters:
**ACPI: SSDT, CpuPm, DropOem false.
**Boot: Arguments "npci=0x3000 darkwake=0", Secure false, XMPDetection false.
**Devices: Audio Inject false.
**KernelAndKextPatches: AppleAHCIPort (external drives), IOAHCIBlockSTorage (TRIM), AppleTyMCEDriver (MacPro5,1 w/o ECC RAM).
**SMBIOS: ProductName "MacPro5,1" + associated fields (BiosReleaseDate, BiosVersion, BoardSerialNumber, SerialNumber, SmUUID with MAC as last segment).
**SystemParameters: InjectKexts true (, InjectSystemID true.
Post-Installation:
*Install Clover to EFI partition on SSD and copy over config.plist and kexts.
*Install nVidia drivers for 10.9.3 (334.01.01f01).
|{{Y}}
|-
|GA-H87M-D3H
|Intel® H87 Chipset
|
'''System Configuration:'''
*CPU: Intel Core i5 4570 @3.4 GHz
*GPU: internal Intel HD4600
*RAM: 1x4GB 1600Mhz
*HDD: Kingston 120 GB SSD
'''Component Status:'''
*Graphics including HDMI  ok
*Ethernet ok
*USB 3.0 ok
*App Store&imessage ok
*Sleep, Wakeup, Poweroff ok
|
'''BIOS changes:'''
*xHCI mode is auto
*xHCI and EHCI Hand-off is enabled
*Vt-D is disenabled
'''Installation Method:'''
*Myhack Method; bootflag; -v -x
Post-Installation:
*ALC892, RealtekRTL81xx v0.0.90 ,TRIM, NullCPU 
|{{Y}}
|-
|GA-EP45-UD3P
|
*North Bridge: Intel® P45 Express Chipset
*South Bridge: Intel® ICH10R
|
'''System Configuration:'''
*CPU: Intel Core 2 Quad Q8400 @2.66 GHz
*GPU: ATI Radeon HD 6770
*RAM: 4x2GB 800 MHz
*HDD: Samsung 840 EVO 250GB + 1TB Western Digital Caviar Blue in Fusion Drive
'''Component Status:'''
*'''Graphics including HDMI'''  ok
*'''Ethernet''' ok
*'''USB'''  ok
*'''App Store''' ok
*'''iMessage''' Not working yet
*'''Sleep''' displays go off but PC keeps running
*'''Wakeup, Poweroff''' ok
*'''Sound''' Will break after App Store upgrade from 10.9.2
*AppleTyMCEDriver.kext removed after upgrade trough the recovery partition due to kernel panic
|
'''BIOS changes:'''
*Sata mode is AHCI
*Vt-X is enabled
'''Installation Method:'''
*Myhack Method; manually install Chamelon bootloader to the boot partitions of BOTH disks
Post-Installation:
*ALC889, RealtekRTL81xx v0.0.90 ,TRIM, silent boot, custom DSDT, restart fix, ati config set to Bulrushes  
|{{Y}}
|-
|}

=== Intel ===
{| class="wikitable" width=100%
!Hardware Name
!Chipset 
!Notes 
!Patches Used
!colspan=2| Compatible 64bit
|-
|}

=== MSI ===
{| class="wikitable" width=100%
!Hardware Name 
!Chipset 
!Notes  
!Patches Used
!colspan=2| Compatible 64bit
|-
|[http://www.msi.com/product/mb/B75MAE33.html B75MA-E33]
|Intel® B75
|'''System configuration:'''
* CPU: Intel Celeron G1610 (2.6 GHz)
* GPU: Palit NV GT640 1Gb
* RAM: Corsair 8Gb CMV8GX3M1A1333C9 DDR3
* HDA: Realtek ALC887
* NIC: Realtek RTL8169
* HDD: OCZ Vertex 4 128Gb

'''BIOS Settings:'''
* Load Optimized settings
* Patched Bios

'''Installation method:'''
* App Store 10.9.0 InstallESD.dmg
* USB Installation
* NVIDIA kexts from 10.9.2 taken [http://www.osx86.net/files/file/4020-nvidia-1092-kexts-for-rollingback-option here] to avoid no signal NV issue

'''System Status:'''
* Graphics: QE, full 3D acceleration, native resolution, DVI monitor detected correctly {{Y}}
* Audio {{Y}}
* Ethernet {{Y}}
* USB 2.0 {{Y}}
* USB 3.0 {{Y}}
* TimeMachine, App Store {{Y}}
* Sleep, Wakeup, Poweroff {{Y}}
|'''Post-installation:'''
* DSDT-Free
* Audio -> Realtek ALCxxx -> Without DSDT -> ALC 887/888b -> Current + HDAEnabler
* Network -> Lnx2Mac's RealtekRTL81xxx
* System definitions -> MacPro3,1 (default)
* Chameleon Bootloader
* FakeSMC
* NVIDIA Web driver installed
|{{Y}}
|-
|MSI P-31/W8
|Intel® H61 B3
|'''System configuration:'''
* CPU: Intel Core i3 - 3220 (3.3GHZ Ivy Bridge)
* GPU: Asus Geforce GT630 2GB Silent
* RAM: Kingston 4GB
* HDA: Realtek ALC887
* NIC: Realtek 811x
* HDD: Western Digital 500GB Caviar Blue

'''BIOS Settings:'''
Just change SATA mode to AHCI

'''Installation method:'''
* App Store 10.9.0 InstallESD.dmg
* USB Installation
* NVIDIA Card works OOB but just in case install this [http://www.osx86.net/files/file/3566-new-109-nvidia-gt-630-native-lastest-driver/ here]

'''System Status:'''
* Graphics: QE, full 3D acceleration, native resolution, DVI/HDMI monitor detected correctly {{Y}}
* Audio {{Y}}
* Ethernet {{Y}}
* USB 2.0 {{Y}}
* USB 3.0 {{Y}}
* TimeMachine, App Store {{Y}}
*  Poweroff {{Y}}
|'''Post-installation:'''
* DSDT-Free
* Audio -> Realtek ALCxxx -> Without DSDT -> Universal -> (Any versions of VoodooHDA after v.2.72)Reason: HDAEnabler version doesn't detect front panel jacks
* Network -> Lnx2Mac's RealtekRTL81xxx
* System definitions -> MacPro5,1 
* Clover Bootloader (Be sure to check "Install Clover on UEFI motherboards)
* FakeSMC

"Info"

* Sleep works a bit properly cous it can wakeup but mouse will freeze after that.
|{{Y}}
|-
|}

=== PCWARE ===
{| class="wikitable" width=100%
!Hardware Name  
!Chipset 
!Notes
!Patches Used
!colspan=2| Compatible 64bit
|-
|}

=== QUO ===
{| class="wikitable" width=100%
!Hardware Name  
!Chipset 
!Notes
!Patches Used
!colspan=2| Compatible 64bit
|-
|}

=== Supermicro ===
{| class="wikitable" width=100%
!Hardware Name  
!Chipset 
!Notes
!Patches Used
!colspan=2| Compatible 64bit
|-
|[http://www.supermicro.com/products/motherboard/Xeon/C600/X9SRA.cfm X9SRA]
|C602
|'''System configuration:'''
* Motherboard: Supermicro X9SRA motherboard
* CPU: Intel Xeon E5-2620
* RAM: 64GB of RAM
* GPU: NVIDIA Quadro NVS 315
* HDD: Intel SSDs
|
* FakeSMC, Chameleon and TRIMEnabler installed.
* Kernel flags in /Extra/org.chameleon.Boot.plist set to "dart=0 ncpi=0x2000." (In particular, it will not boot at all unless ncpi=0x2000 is set, and it will not boot with VT-d enabled unless dart=0 is set). 
* GenericUSBXHCI.kext for USB 3.0
* Got the CPU fan to stop oscilliating (BIOS update to 3.0c solved it)
* For audio, install VoodooHDA 2.8.4. Remove AppleHDA. Replace /System/Library/Extensions/VoodooHDA.kext/Contents/Info.plist with http://pastebin.com/raw.php?i=2fgRNRYq Integrated microphone jacks not working yet, 5.1 surround sound is working. Surround sound requires making an aggregate device in Audio MIDI Setup. Line-Out Green Rear is the front. Line-Out Orange Rear is the back. Line-Out Black Rear is the center and subwoofer.
* Useful documentation was here: http://olarila.com/forum/viewtopic.php?f=18&t=604 http://www.insanelymac.com/forum/topic/149128-how-to-pinconfig-for-linux-users-%EF%BF%BD-realtek-alc883-example/
|{{Y}}
|}

==Graphics Cards== 
Please specify if your card is PCI-E or Integrated.<br />
Also, place chip and board manufacturer in their respective column.

===PCI-E===
====AMD/ATI====
{| class="wikitable" width="100%"
!Model
!Board-Manufacturer
!Notes
!QE/CI
!Output
!Dual display
!colspan="2"| Compatible 64bit
|-
|[http://www.asus.com/Graphics_Cards/EAH4350_SILENTDI512MD2LP/ Radeon™ HD 4350] 
|Asus
|
* Clover r2565 Bootloader with FakeID 0x94901002
* GraphicsEnabler => No and no DefaultFramebuffer
* Workis still good as Office Card but nothing more
|{{Y}}
|DVI / HDMI
|Not tested
|{{Y}}
|-
|[http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=569&pid=189&psn=&lid=1&leg=0#.UGDwRFHRalY Radeon™ HD 4830] 
|Sapphire
|
* Using [http://www.insanelymac.com/forum/files/file/242-qeci-exotic-patch-for-mavericks-ati-48xx-gfx/ QE_CI Exotic patch]
* Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow
* GraphicsEnabler=Yes
|{{Y}}
|DVI / DVI
|Not tested
|{{Y}}
|-
|[http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=917&pid=315&psn=&lid=1&leg=0 Radeon™ HD 5450] 
|Sapphire
|
* Patched ID 0x68f91002 in AMD5000Controller and ATIRadeonX3000.
* GraphicsEnabler = No
|{{Y}}
|DVI / HDMI / VGA
|{{Y}}
DVI+VGA
|{{Y}}
|-
|[http://www.sapphiretech.com/presentation/product/product_index.aspx?pid=341&lid=1 Radeon™ HD 5770] 
|Sapphire
|
* Install kext PIEROF81Inject.kext Edited by me
|{{Y}}
|Dual DVI / HDMI / DisplayPort
|{{Y}}
|{{Y}}
|-
|[http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1073&pid=11190&psn=&lid=1&leg=0#.UGDy8lHRalY Radeon™ HD 6770] 
|Sapphire
|
* Using [http://www.insanelymac.com/forum/topic/282687-radeon-hd-6770-full-qeci-mountain-lionmavericks/ those methods]
* Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow
* GraphicsEnabler => No more need!!!
|{{Y}}
|DVI / HDMI / VGA
|Not tested
|{{Y}}
|-
|[http://products.xfxforce.com/en-us/Graphics_Cards/AMD_Radeon™_HD_7790/FX-779A-ZDB4 Radeon™ HD 7790] 
|XFX
|
Works out of box! Apple includes the brand new AMD8000Controller.kext with 10.10 seeds! 
|{{Y}}
|HDMI / VGA Tested, DisplayPort and DVI Not tested
|Not tesded
|{{Y}}
|-
|[https://www.asus.com/Graphics_Cards/R9270DC2OC2GD5/ Radeon™ R9 270] 
|Asus
|
* Clover r2671/2747
* ATI FakeID: 0x68101002
* Inject ATI: True (pretty reporting in profiler, no HDMI) or False (don't care, wants HDMI)
* FB Name: (not set)
* Clover Kext Patch ([http://www.osx86.net/files/file/3711-amd-radeon-r9-270-series/ inspired by Vlada's patch]):<br />
<small><small>
::ATIConnectorsController: 7000
::ATIConnectorsData: 000400000403000000010101120404010004000004030000000102012205050204000000140200000001030000000606000800000402000000
::ATIConnectorsPatch: 040000001402000000010000110205050008000004020000000100002205020200040000040300000001000012040101000200000402000000
</small></small>
|{{Y}}
|DVI / HDMI
|Not tested
|{{Y}}
|-
|}

====NVIDIA====
{| class="wikitable" width="100%"
!Model
!Board-Manufacturer
!Notes
!QE/CI
!Output
!Dual display
!colspan="2"| Compatible 64bit
|-
|[http://www.twintech3d.com/en/products_features.asp?num=322 GeForce GT610 2GB]
| Twintech
|
* Works OOB
|{{Y}}
|DVI/HDMI/VGA
|{{Y}}
|{{Y}}
|-
|[http://www.evga.com/Products/Product.aspx?pn=03G-P4-2665-KR GTX 660 3072MB SuperClocked Sig2]
|EVGA
|
* Using default system drivers
* Chameleon/Clover
* GraphicsEnabler=No
|{{Y}}
|DVIx2/HDMI/DisplayPort
|Not tested
|{{Y}}
|-
|[http://www.gigabyte.com.au/products/product-page.aspx?pid=4657 GTX 760 2GB Windforce]
|Gigabyte
|
*Works out of box with default drivers / also works with nVidia Web Driver
*No GraphicsEnabler needed
*Three monitors detected and auto-configured
|{{Y}}
|2xDVI/HDMI/DisplayPort
|{{Y}}
|{{Y}}
|-
|[http://www.twintech3d.com/en/products_features.asp?num=229 GeForce 9800GT 512Mo]
|Twintech
|
*GraphicsEnabler=Yes
*On AMD kernels, needs reverting to IOPCIFamily + AppleACPIPlatform kexts from 10.9.1 and eventual DSDT patch (for PCI root and/or card details injection)
|{{Y}}
|DVI / DVI
|{{Y}}
|{{Y}}
|-
|}

===Integrated===
====INTEL====
{| class="wikitable" width="100%"
!Model
!Board-Manufacturer 
!Notes  
!QE/CI 
!Output
!Dual display
!colspan="2"| Compatible 64bit
|-
|}

==Network Cards==
===Wireless===
{| class="wikitable" sortable" width="100%"
!Interface
!Standard
!Device
!Manufacturer
!Chipset
!Notes
!colspan="2"| Compatible 64bit
|-
|USB 2.0
|802.11 n / g / b
|00062778 WLAN
USB 2.0 150Mbps 
|Hama
|Not confirmed
(Ralink)
|Working with UI 4.0.9.6 Drv: 4.2.9.2
https://www.hama.com/webresources/drivers/00062/00062778_macosx107_108_109_dv4_2_9_2_uiv4_0_9_6.dmg

Tested and working properly. Thx to kaefpe.me
|{{Y}}
|-
|}

===Wired (Ethernet)===
{| class="wikitable" sortable" width="100%"
!Interface
!Standard
!Device
!Manufacturer
!Notes
!colspan="2"| Compatible 64bit
|-
|}

==Sound Cards== 
{| class="wikitable" sortable" width="100%"
!Interface
!Hardware Name
!Manufacturer
!Notes
!colspan="2"| Compatible 64bit
|-
|}

== Webcams ==
{| class="wikitable" width="100%"
!Interface
!Item Description
!Manufacturer
!Notes
!colspan="2"| Compatible 64bit
|-
|}

== Bluetooth ==
{| class="wikitable" width="100%"
!Interface
!Item Description
!Manufacturer
!Chipset
!Notes
!colspan="2"| Compatible 64bit
|-
|USB
|Delock 61889 Bluetooth V4.0 dual mode USB adapter
|Delock
|Broadcom
|Works OOB including wake from sleep by Bluetooth device
|{{Y}}
|-
|}

== USB 3.0 Cards / Adapters ==
{| class="wikitable" width="100%"
!Type of Accessory
!Item Description
!Manufacturer
!Notes
!colspan="2"| Compatible 64bit
|-
|}

==Keyboard & Mouse==
===Wireless===
{| class="wikitable" width="100%"
!Interface
!Item Description
!Manufacturer
!Model No
!Notes
!colspan="2"| Compatible 64bit
|-
|}
@@ Line 100: / Line 100: @@
 *Sound - Works when using VoodooHDA kext {{Y}}
 *Kernel - Vanilla Mach_kernel {{Y}}
-|{{Y}}
-|-
-|[http://www.asrock.com/mb/Intel/Fatal1ty%20Z87%20Professional/ Z87 Fatal1ty Professional]
-|Intel Z87
-|'''System Configuration:'''
-*CPU: Intel Core i7 (Haswell) 4770K @3.5GHz
-*RAM: 16GB (4x4GB) Kingston 1333MHz
-*VGA: Gigabyte GeForce GTX760 WindForce 2GB
-*ETH: 1 x Intel I217-V, 1 x Intel I211
-*SND: Creative Sound Core3D
-*BIOS: 1.90
-'''System Status:'''
-*All of the above components: {{Y}}* (See Notes)
-*Reboot, Shutdown: {{Y}} (OOB)
-* Sleep/Wake: {{Y}} (OOB)
-|'''Installation method:''' USB 10.9.3 from App Store prepared on existing Macbook Pro
-'''Notes'''
-* Boot flags: '''npci=0x1000'''
-* Virtualization, CPU powers states all enabled in BIOS
-* Graphics - {{Y}} (OOB)
-* Ethernet (I217-V) - {{Y}} (OOB)
-* Ethernet (I211-V) - {{N}} Not Detected
-*USB - {{Y}} (OOB)
-*USB 3.0 - {{Y}} (OOB)
-*SATA - {{Y}} (OOB)
-*App Store - {{Y}} (OOB)
-*Sound - {{Y}} (With [http://sourceforge.net/projects/voodoohda/files/VoodooHDA_V286_MAV.pkg.zip/download latest VoodooHDA])
-*Kernel - {{Y}} (OOB)
 |{{Y}}
 |}