HCL 10.9.3

• CPU: Core i3 4130
• GPU: Saphire HD5450 512MB

Bios settings

• Version: 1.90
• Virtualization disabled
• primary graphics: pci-e
• legacy mode

Installation:

• AppStore Mavericks app (10.9.3)
• SMBios: iMac14,2
• USB created myHack 3.3.1 (no MBR patch)
• patched mach_kernel

System Status:

• AMD Graphics: QE, full 3D acceleration
• Intel IGP Graphics - not tested!
• Audio
• Ethernet
• USB 3.0
• Sleep, Shutdown, Restart

• Kernel -> directly after installation replace mach_kernel

(HDD) with patched kernel (MyHack USB) through Terminal.app

• Audio -> ALC892
• Network -> Intel I217v - AppleIntelE1000e.kext
• patch Device ID (0x68f91002) in AMD5000Controller and ATIRadeonX3000.

Chameleon Boot Flags:

• GraphicsEnabler=No

Extra / Extensions:

• AppleIntelE1000e.kext
• FakeSMC.kext
• lspcidrv.kext
• Patched_10.7_AppleRTC.kext

• CPU: AMD FX-6100 @3.3 Ghz
• GPU: Nvidia GeForce G210
• RAM: 2x4GB 1600Mhz
• HDD: Seagate Barracuda 1Tb

Bios settings:

• AHCI
• Suspend Mode S3

Installation:

• AppStore Mavericks app (10.9.3) update from 10.9.2

System Status:

• Graphics: QE, full 3D acceleration DVI VGA
• Audio -> USB Hercules Djconsole 4-MxEthernet
• TimeMachine, App Store
• Sleep, Wakeup, Poweroff

• Kernel and kexts -> AMD Kernel Mavericks 10.9.3
• Network -> Qualcomm Atheros 8161Gb LAN Kext

System Configuration:

• CPU: Intel Core i5 4570 @3.4 GHz
• GPU: internal Intel HD4600
• RAM: 1x4GB 1600Mhz
• HDD: Kingston 120 GB SSD

Component Status:

• Graphics including HDMI ok
• Ethernet ok
• USB 3.0 ok
• App Store&imessage ok
• Sleep, Wakeup, Poweroff ok

BIOS changes:

• xHCI mode is auto
• xHCI and EHCI Hand-off is enabled
• Vt-D is disenabled

Installation Method:

• Myhack Method; bootflag; -v -x

Post-Installation:

• ALC892, RealtekRTL81xx v0.0.90 ,TRIM, NullCPU

• North Bridge: Intel® P45 Express Chipset
• South Bridge: Intel® ICH10R

System Configuration:

• CPU: Intel Core 2 Quad Q8400 @2.66 GHz
• GPU: ATI Radeon HD 6770
• RAM: 4x2GB 800 MHz
• HDD: Samsung 840 EVO 250GB + 1TB Western Digital Caviar Blue in Fusion Drive

Component Status:

• Graphics including HDMI ok
• Ethernet ok
• USB ok
• App Store ok
• iMessage Not working yet
• Sleep displays go off but PC keeps running
• Wakeup, Poweroff ok
• Sound Will break after App Store upgrade from 10.9.2
• AppleTyMCEDriver.kext removed after upgrade trough the recovery partition due to kernel panic

BIOS changes:

• Sata mode is AHCI
• Vt-X is enabled

Installation Method:

• Myhack Method; manually install Chamelon bootloader to the boot partitions of BOTH disks

Post-Installation:

• ALC889, RealtekRTL81xx v0.0.90 ,TRIM, silent boot, custom DSDT, restart fix, ati config set to Bulrushes

• CPU: Intel Celeron G1610 (2.6 GHz)
• GPU: Palit NV GT640 1Gb
• RAM: Corsair 8Gb CMV8GX3M1A1333C9 DDR3
• HDA: Realtek ALC887
• NIC: Realtek RTL8169
• HDD: OCZ Vertex 4 128Gb

BIOS Settings:

• Load Optimized settings
• Patched Bios

Installation method:

• App Store 10.9.0 InstallESD.dmg
• USB Installation
• NVIDIA kexts from 10.9.2 taken here to avoid no signal NV issue

System Status:

• Graphics: QE, full 3D acceleration, native resolution, DVI monitor detected correctly
• Audio
• Ethernet
• USB 2.0
• USB 3.0
• TimeMachine, App Store
• Sleep, Wakeup, Poweroff

• DSDT-Free
• Audio -> Realtek ALCxxx -> Without DSDT -> ALC 887/888b -> Current + HDAEnabler
• Network -> Lnx2Mac's RealtekRTL81xxx
• System definitions -> MacPro3,1 (default)
• Chameleon Bootloader
• FakeSMC
• NVIDIA Web driver installed

• Motherboard: Supermicro X9SRA motherboard
• CPU: Intel Xeon E5-2620
• RAM: 64GB of RAM
• GPU: NVIDIA Quadro NVS 315
• HDD: Intel SSDs

• FakeSMC, Chimera and TRIMEnabler installed.
• Kernel flags in /Extra/org.chameleon.Boot.plist set to "dart=0 ncpi=0x2000." (In particular, it will not boot at all unless ncpi=0x2000 is set, and it will not boot with VT-d enabled unless dart=0 is set).
• GenericUSBXHCI.kext for USB 3.0
• Got the CPU fan to stop oscilliating (BIOS update to 3.0c solved it)
• For audio, install VoodooHDA 2.8.4. Remove AppleHDA. Replace /System/Library/Extensions/VoodooHDA.kext/Contents/Info.plist with http://pastebin.com/raw.php?i=2fgRNRYq Integrated microphone jacks not working yet, 5.1 surround sound is working. Surround sound requires making an aggregate device in Audio MIDI Setup. Line-Out Green Rear is the front. Line-Out Orange Rear is the back. Line-Out Black Rear is the center and subwoofer.
• Useful documentation was here: http://olarila.com/forum/viewtopic.php?f=18&t=604 http://www.insanelymac.com/forum/topic/149128-how-to-pinconfig-for-linux-users-%EF%BF%BD-realtek-alc883-example/

• Clover r2565 Bootloader with FakeID 0x94901002
• GraphicsEnabler => No and no DefaultFramebuffer
• Workis still good as Office Card but nothing more

• Using QE_CI Exotic patch
• Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow
• GraphicsEnabler=Yes

• Patched ID 0x68f91002 in AMD5000Controller and ATIRadeonX3000.
• GraphicsEnabler = No

DVI+VGA

• Using those methods
• Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow
• GraphicsEnabler => No more need!!!