Talk:Install On A Partition Simple And Accurate
(→Can I install other software on OSX?)
|Line 330:||Line 330:|
== Can I install other software on OSX? ==
== Can I install other software on OSX? ==
Revision as of 20:29, 24 September 2006
I wonder if we don't need rootnoverify instead of root in the grub.conf file.
Grub HFS+ Error
This doesn't work on my system. The reboot fails with grub complaining about a "HFS+ partition Error". I dd as indicated in the article, skipping the 63 first blocks of 512 bytes.
Strangely enough, I can mount the OS X partition, and the mount command does not complain about this "HFS+ error". The mounted partition works perfectly.
I've also set the flag "bootablCKJSDBcnakhsdbksh dvnjs hedcb njhe bdwed
I tried both root/rootnoverify. Not better.
My secondary disk is as follow:
Name Flags Part Type FS Type [Label] Size (MB) ----------------------------------------------------------------------------- hdc1 Primary Solaris boot 518.20 hdc2 Primary W95 FAT32 1998.75 hdc3 Boot Primary Unknown (AF) 7427.43 hdc5 Logical Linux LVM 10479.01 hdc6 Logical Linux LVM 10479.01 hdc7 Logical Linux swap / Solaris 1571.03 hdc8 Logical Linux raid autodetect 5239.51 Logical Free Space 85806.13
Any ideas or suggestions? -- User:rds
Yes, see below (last)-- "logical drive--pertaining other oses" about using the boot cd..
Check Grub is installed properly
try using " Even Easier Boot" method else, make sure you install grub where it should be installed if you get the boot selection then grub is properly installed. if not, its not.. :) you need a small 50meg partition (for example) in ext2 (example again) to install grub on linux, or on windows i guess it work s with ntfs or fat. prolly it doesnt if u install directly on hfs(+)
Unfortunately, Grub is installed correctly, I boot on linux every day ;-)
Must be primary partition
Same problem. But i have noticed, that when partition type is 0xAF (Not darwin boot 0xab), there is another error message: Error loading booter. In the original .img file there is 0xaf type is set. May be the partition must be PRIMARY? (I was trying to install it on hda6). Will try hda2 soon. (Sorry for my english). -- User:gloomy
I have three partitions, 1 OEM (made by Dell) that is 55 megs, the main Windows NTFS partition at 50 gigs, and i made the AF type partition and made SURE it's marked as primary and I followed all the instructions, but it still says HFS+ partition error. what am i doing wrong? please help!! : | --user: sheikhmango
The proper Grub options
Ok, after spending some time with a trial and error approach, I finally decided to read the fine manual of Grub. Here are my conclusions:
- rootnoverify does not help over root
- the option chainloader --force sounds interesting.
I have updated the main article, because it works for me now. Mac OS X is pretty nice. It is pretty slow, also. (And just for the story, my keyboard was not detected on PS/2 but no probs on USB.)
Plz post a working GRUB configuration
Is there a way to get the exact partition size to create? We are using the same tiger-x86-flat.img aren't we? -- User:foouser
Yes we are. I did not think about it yet. I have just running it!!! :) There are a lot of another problems. I just playing with it, not work in it. :) PPC emulation not working... Sad. I have not SSE3 on my notebook. :( Hint: if something halts during boot, add -v 6 parameter to kextd call in /etc/rc in single mode and see what it is (loading with -v of couse). In my case it was ACPI and Firewire modules. Just remove it. Sorry for my english egain. :) -- User:gloomy
Still waiting for root drive error
[asdorel's problem] OSX stalls at the grey loading screen. Enabling -v mode, osx outputs "Still waiting for root drive". Please help :(
[tom's problem] I think I'm getting the same error (Still waiting for root device). I have a P4 2.8 GHz with SSE3 on a Asus P4S800 mainboard. I also tried booting with rd=disk0s1 -v at the boot prompt.
[mike's problem] Hey Tom I also have the same problem on the same MOBO with a Celeron D with SSE3...
I think I have the same problem it says waiting for root hub (I am thinking that is USB?) AMD64 3000+, ABIT AV8
tom: I also have something like this, but when I deactivate USB in the BIOS, it only says "Still waiting for root device" every 5 minutes or so.
I'm getting almost the same error: OSX stalls at grey screen, in -v mode it stops at the line: 'BSD root: disk0s2, major 14, minor 2' Anybody know what this means?
['s problem] I'm have same message after booting from DVD. Configuration - Asrock P4Dual 915GL, Celeron D, Toshiba DVD-ROM SD-M1912. I found in internet this: "If you do get text in verbose mode, then note any error messages, and note what the last messages are before the process grinds to a halt. If the last messages are a repeated "Still waiting for root device", then it means that Mac OS X is having some trouble with your CD-ROM device."
[Lino's problem] I'm having the same problem as every one of you! I think if happens because o my Promise RAID 2+0 Devise. Isn't it possible that it's just not suported? Even Windows XP asks for that type of driver right? With our without de array 2+0!!! Send help!!
[vtechstu's problem] Same thing here guys. Has anyone found a fix/solution to this? My same set supposedly works according to the list.
[koriakine] I solved this like this: whore correct memory_size=0x20000000 and prom_env_machargs = "" works well, before was this damn error
output block size can be bigger
Most people does not read man for dd, but those who read know that much faster copying can be done in such way:
dd if=tiger-x86-flat.img of=/dev/hda2 ibs=512 skip=63 obs=1M
I dont think that the command above would be much faster, if i read the dd's manual well, the read buffer is still 512 Bytes... --User:wharever
you can do the following:
dd if=tiger-x86-flat.img of=/dev/hda2 ibs=32256 skip=1 obs=1M
(32256 = 512*63) i was able to speedup the process about 75%
Does the above DD still skip the first 63 bytes? -- Mike Mike, It does still skip the first 63 bytes
--anon I think that you mean 63 blocks :-)
Size of Partition
So with using this method. Are you then able to specify a partition bigger than the 6 gig image?
As far as i can tell: No. The closest i can get using dd to copy is using the method described in this thread.
Using the method described in the link in OSx i see a partition with a capacity that matches the actual partition size. However there is still a problem, disk utility shows the partition like this:
Capacity : 14.3 GB Available: 102.7 MB Used: 3.9 GB
Which is of course not correct. I haven't been able to fix this(tried fsck, disk utility and some other things) but i feel it should not be really hard to fix. Anyone have an idea how to fix this?
Marklar-Tiger.iso != tiger-x86-flat.img?
I'm confused. Is "Marklar's" release just the DVD with patches or is it an complete installation ready to mount? I only have the Marjklar release. Is it possible to do a simple installation w/o VMWare / PearPC using this image?
The Marklar-Tiger.iso is the DVD which allows you to install OS X on approved Apple Intel x86 systems.
So one used hacked versions of some key files and installed it and made a VMWare Hard Disk image. The tiger-x86-flat.img could be extracted to a hard drive. Then you could place the Hard drive into a x86 system and boot into OS X.
Ok, thanks. Got it :)
Also, "Marklar" isnt' a person; Marklar was Apple's codename for the Mac OS X on Intel project. It was rumored way back in 2002: http://www.macrumors.com/pages/2002/08/20020830181129.shtml :)
Block size when copying the image file
wrote: Correct me if i am wrong but i think using bs=8192 instead of bs=512 will speed things up while copying -- 22.214.171.124
If you change the bs, then the skip parameter will have a totaly different meaning, since skip is expressed in blocks and bs gives the block size. I have not tested, but I am pretty sure that your partitopn will not be a correctly formated filesystem if you don(t skee p exactly 63*512 bytes. -- User:rds
Will this work with a SATA drive
Copying Image To Partition
I had the CMD window open for like a half hour and nothing happend, does it really take that long?
C:\Documents and Settings\Michael\Desktop\OSx86>dd if=tiger-x86-flat.img of=\\?\Device\Harddisk0\Partition2 bs=512 skip=63 rawwrite dd for windows version 0.3. Written by John Newbigin <[email protected]> This program is covered by the GPL. See copying.txt for details
Nothing else after that...
COMMENT: In the windows version of dd you can add the switch --progress. Then you will see a progress indicator.
so your commandline should look like this:
dd if=tiger-x86-flat.img of=\\?\Device\Harddisk0\Partition2 bs=512 skip=63 --progress
are you sure boys?
really ? would the mac change the bootloader or anything else so that i cant log in winxp never again?
Can I use PartitionMagic to make a partition?
I don't want to destory my Windows XP installation, so I wan't to make a new partition for mac at the end of disk. How can i do it?
Yes you can, I used PartitionMagic Version 8.0 to create a 6.5GB partition at the end of my drive for OSx86.
thanks a lot
What type of partitian did you make. Does Partitian Magic have option for HFS+
would the mac x86 destory the MBR or boot loader?
i heard someone cant turn off his pc in mac and he cant boot into xp now whats the matter and how to fix it?
i had that error the first boot in osx86 was ok dual boot ok but after the 2nd boot in osx86 and some exploration on xp partition the computer failed to start i had to boot from xp cd and delete the partition osx86 with command diskpart for recovering xp booting. maybe due to 2 partitions actives in same time... don't know.
If you screw up your XP boot.ini just put your XP CD back in on reboot and go into recovery. use commands FIXMBR FIXBOOT, however you won't be able to boot back into OSx86
my ethernet doesn't work
I can't get my ethernet to work. It detects my firewire but not my builtin-ethernet any ideas?
I get a kdp_poll error
What should I do?
Make sure you've installed OSX on the first partition on the primary master drive!
Using Diskpart To Create HFS+
I followed the guide to the letter typing in "create partition primary id=af", but when I use diskpart to create the partition, instead of getting an unknown partition, I get a primary partition and it shows up as an unformatted drive in my computer. Is there another windows utility that will create HFS+ or is there a way to get diskpart to work?
Error loading operating system with two partitions
Using the method outlined involving diskpart and dd, i successfully placed osx on my HD with a Windows XP dual boot. I used the windows bootloader to allow me to switch between operating systems. This lasted through the weekend. however late sunday, I began to receive the "error loading operating system" message upon loading Windows. Has anyone else received that? I used the recovery discs to solve the windows problem. I am just hesitant to do that again if that is the inevitable outcome. Has anyone else experienced that (assuming they are dualbooting on multiple partitions)?
Update - This appears to be caused by enabling hibernate mode for my notebook with Windows XP. After disabling macdrive, I was able to place Windows XP in hibernate mode. As the computer shut down, it may have altered the MBR or another important aspect of the partition to give the error message.
Added 2000 Diskpart
I just added the Win2k MS Diskpart. You can find it here: http://www.microsoft.com/windows2000/techinfo/reskit/tools/new/diskpart-o.asp
The syntax is the same, I think. There might be a few small differences, but nothing affecting this tutorial. Feel free to correct it.
Very slow loading
Hi, using win2k bootloader it boots perfectly but after that it is VERY SLOW during the loading process.How can I do? Thanks.
Hardware: Acer Ferrari 4005 Wlmi..Turion 64(sse2+sse3 support) 2Ghz 1Gb DDR333 Ati x700 PCIe
stuffit expander causes .img file to be 2 GB
I know the article says to use WinRAR, but I already had Stuffit installed. Should a strong warning against stuffit expander be included in the appropriate section?
boot onto logical drive -- pertain the other oses
I'm waiting for a clean bootloader. I have used the patched Marklar installer (ppf'ed). I backed up my mbr before I installed it natively. After the install, I repaired my mbr.
steps: Prestuff--like make partition and of type 0xaf, at least 7-8 gigs. This is what I did- upon install, i went to a termbox and issued new "newfs_hfs" with -J (journaled) and -s (case-sensitive filenames). I already set and spaced a partition for this install previously with linux and cfdisk. I then continued in the gui with the installer-- but I think I had to reboot after issuing newfs_hfs..so anyways-- once you're ready to install Macos, you shouldn't have trouble installing it to this hfs partition--(one problem it does is that it damages the windows-style and linux-style of partition table-- sector 0 of the hardrive so back up your partition table)
After rebooting, I repaired the mbr because somehow the installer corrupts this-- this is important to repair if you boot into windows or linux. (the corruption doesn't go too far-- it overwrites the first xx sectors and perhaps others but only at the start of the drive and before the first partition with windows, so it's safe). To boot into the far partition-- (this was on a logical drive)--> I use the installer cd and at the prompt (f8), I type :mach_kernel rd=disk0s8 (in my case it was disk0s8, you can find yours with the mount cmd in termbox while in mac installer).
I'm still trying to see how I can boot off the mach_kernel from the logical drive, which I've never been able to do.
I had the same problem, and here's how I solved it:
Part 1 (primary) 512 M FAT empty Part 2 (primary) 16 gb NTFS WinXP Part3 (primary) 16gb EXT3 LInux Part 4 (Primary) Part 5 (Logical) 16 gb HPFS+ OSX86 active
Copy file chain0 to C:/ Make sure only partition 5 is active Boot Linux Edit /boot/grub/grub.conf to look like this:
default=1 timeout=5 splashimage=(hd0,2)/boot/grub/splash.xpm.gz hiddenmenu title Fedora Core (2.6.9-1.667) root (hd0,2) kernel /boot/vmlinuz-2.6.9-1.667 ro root=LABEL=/ initrd /boot/initrd-2.6.9-1.667.img title Windows XP rootnoverify (hd0,0) chainloader +1 title OSX86 chainloader (hd0,0)/chain0
Install with: grub-install /dev/hda that's it
There is a legal disclaimer at the top that says this is not to be used for illegal torrents, but for legal images only... and then the article proceeds how to install with deadmoo's image. Thoughts?
Booting from external HDD
Well, here I am. What I intend to do is to put the Image-File onto my external HDD, so that I can use the BIOS to select the boot device. In this way, I wouldn't have to manipulate (and endanger) my internal HDD's installation. Furthermore I would like to keep the data stored on the external HDD so far. So I resized the data partition on my ext.HDD using PMagic in order to free some space for OSX. Then, I created a new primary partition in that free space and I DDed the tiger-x86-flat.img to that partition, skipping the first 63 bytes. Now, of course,the BIOS won't boot from the external drive as there is no bootsector in the first partition. My question: (how) is it possible, to dd the image to my external HDD's primary partition _including_ the bootsector but _without_ the partition table (to preserve the existing partition structure)? If that does not work: Can grub boot from external HDDs?
Simple Solution for HFS+ Partition Error
i`ve had the problem of HFS+ partition error whit grub boot loader. to correct it i just simple change my boot loader from grub to LILO and add the correct entry for the Mac OS X partition when i restar it and select mac os x from the lilo boot menu it runs. i found this simple and efective.
Can I install other software on OSX?
Edit: THIS IS NOT A FORUM! STOP ASKING IN IT. USE THE FORUMS INSTEAD